Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹4.2 L+₹2,071 (0.49%)Rejected-Finance | L2 | Rejected-Finance In Eligible |
Tender Value
₹5 L
EMD Value
₹5,000
Closing Date
19 Jan 2024, 3:00 pmClosed
Executive Officer,Ammayanayakkanur Town Panchayat.
Ammayanayakkanur Town Panchayat.
MP Fund -2023-2024 - Providing of New Borewell with Submercible Motor , Pipe line and Sintex at 13th ward Jeganathpuram Victoriya House East Side in Ammayanayakkanur Town Panchayat.
2024_DTP_410163_1
374/2023/A2
Open Tender
Water Supply/Equipments/Meter/Drilling/Boring
Works
90 days
Ammayanayakkanur Town Panchayat.
Refer Tender Notice
1 document required · 1 mandatory
₹0
₹5,000
Yes
1 Feb 2024
15 Jan 2024
19 Jan 2024
15 Jan 2024
19 Jan 2024
15 Jan 2024
Amount
Providing of New Borewell with Submercible Motor
Charges for conducting Geological survey
Drilling of 150mm dia vertical bore well in hard rock area using bore well rig including conveyance and erecting of rig and all labor charges etc
up to 150m Below Ground Level
From 151m to 180m
From 181m to 210m
From 211m to 240m
From 241m to 270m
Supply and fixing of 150mm CS dia PVC casing pipe including cost of materials and all labor charges etc.,
Supply and delivery of Water supply Materials inculding loading, unloding and transporting etc., complete
3 HP Submercible motor (Motor should give 50lpm x 275 m head)
3 HP Panel board
4.00 sq.mm submercible cable
32m dia ISI UPVC Pipe
1000 litres capacity HDPE tank
32 m dia.Non-Return Valve
32 mm dia. Hex Nipple
32 mm dia. GI Union
32mm dia ISI G.I. Pipe
32 mm dia. GI Ellbow
32 mm dia. GI coupling(Heavy)
25mm dia ISI G.I Bend
25mm dia ISI Gate valve
Adopter
Bore Kitty
Bore Cover End Cap
32mm dia ISI Gate valve
Supplying and fixing of 32A aerial fuse unit for 3 Nos fuse units (500v) on suitable TW concelled box with hylam sheet on the tapping pole with necessary clamps. SD132
Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade on 7/20 GI bearer wire for service connection mains(SD68)
Supply and run of 4 of 6 sq.mm PVC insulated (Heavy Duty) SC unsheathed Cu.conductor of 1100 V Grade in 32mm GI Pipe suitably bent at both ends with necessary angle iron upright and end supports for mains(SD73)
Supply and fixing of TNEB meter board suitable for 32A Three phase service connection with 32A fuse unit (500V) 32Aneutral link and earth link (1"X1/8"copper flat) on TW plank of size 600mmX450mmX19mm with supporting TW reepers of 1" tk.on either side (SD127)
Labour charges for the erection of submersible pumpset in borewell /openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter,Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Earthwork Excavation for foundation in all types of soils and sub soils including soft disintegrated rock and soft rock to the full depth including all leads and lifts etc., complete complying with the standard specification, drawing and as directed by the departmental Engineers.
Plain Cement concrete of mix 1:4:8 (One cement four M-sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.
Brick Work in Cement Mortor 1:5 Mix (one cement, five M-sand ) using new best country Bricks of size 8 ¾” x 4 ¼” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.
Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.
Supply and fixing of Flooring with cuddappah slab of 50 mm thick for cupboard arrangement including polishing etc., including cost of all materials to site and all labour charges for laying, pointing and proper curring etc., Complete as per Standard Specifications Rate for 10 Sqm., complete and as directed by departmental officers
Plastering in Cement Mortor 1:5 Mix (one cement, five M-sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2. such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., the existing red oxide priming coat in all floors excluding cost of priming coat etc complying with standard specification
Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm and as directed by departmental officers
K G CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_488056.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .