Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.8 LAccepted-AOC M S WALIA TRADING CO VILLAGE VASUDEVPURA NALAGARH ROAD VILLAGE VASUDEVPURA PINJORE HARYANA 134102 | PANCHKULA | HARYANA | 134102 | 1 | Accepted-AOC Accepted | |
| 2 | 2₹10.8 L+₹2.0 L (21.7%)Accepted-AOC | 2 | Accepted-AOC Rejected | |
| 3 | 3₹11.2 L+₹2.4 L (26.3%)Accepted-AOC DHANGU ROAD PAHTANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | 3 | Accepted-AOC Rejected | |
| 4 | Rejected-Technical | - | Rejected-Technical No Slow Progress in WLR |
Tender Value
₹13 L
EMD Value
₹26,000
Closing Date
15 Aug 2020, 6:00 pmClosed
Garrison Enigneer Basoli
Garrison Engineer Basoli Pin-184152
Repair/painting/polishing to wooden/steel furniture and retaping of GI Charpoy for Madhopur area at BS yard Basoli under GE Basoli.
2020_MES_361873_1
GE/BAS-13/2020-21
Open Tender
Miscellaneous Works
Item Rate
270 days
GE Basoli
As Per Tender Documents
8 documents required · 8 mandatory
₹500
Garrison Engineer Basoli
₹26,000
Yes
Garrison Engineer Basoli
5 Sept 2020
18 Jul 2020
18 Aug 2020
18 Jul 2020
15 Aug 2020
1 Aug 2020
25 Jul 2020
Amount
REPAIRS TO TEAPOY VERANDAH (FD-35) (For Srl Item No 01 to 06) Material and labour for replacement of top of teapoy verandah with 18/19 mm thick pre laminated Particle board (exterior grade) both side white face ISI marked and shall be fixed teak wood beading 4 mm thick half round all round the frame all as per drawing complete all as specified and directed.
Material and labour for centre stiffener of 19/20 mm square tube / conduit pipe of wall thickness 1.6 mm and welding complete all as directed by the Engineer-in-Charge .
Material and labour for side stiffener of 19/20 mm square tube / conduit pipe of wall thickness 1.6 mm and welding complete all as directed by the Engineer-in-Charge .
Material and labour for replacement of damaged legs by 19/20 mm square tube / conduit pipe of wall thickness 1.6 mm and welding complete all as per shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for preparation of surface and welding to broken place complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of as per existing colour as approved complete all as specified and directed..
REPAIRS TO TABLE OFFICE CLERK STEEL, FD-1004 ( For Srl Item No 07 to 15) Material and labour for replacement of top of table office clerk steel of size 1160 mm x 570 mm with 18/19 mm thick pre laminated Particle board (exterior grade)one side teak face ISI marked and shall be fixed teak wood beading 4 mm thick half round all round the frame as shown on drawing complete all as specified and directed by Engineer -In -Charge.
Material and labour for replacement damaged drawer of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.
Material and labour for replacement damaged box with drawer complete with locking arrangements of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of damaged legs of 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged long rail/centre stiffener by 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged Short rail /short stiffener by 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawingcomplete all as per shown on drawing complete all as specified and directed.
Material and labour for replacement of unserviceable lock of drawer with new lock of 6 Lever 65 mm of approved quality with duplicate key complete all as specified and directed.
Material and labour for preparation of surface and welding to broken place complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of as per existing colour as approved complete all as specified and directed.
REPAIRS TO TABLE OFFICE OFFICER STEEL – FD-1003 ( For Srl Item No 16 to 24) Material and labour for replacement of top of table office officer steel of size 1680mm x 870mm with 18/19 mm thick pre laminated Particle board (exterior grade)one side teak face ISI marked and shall be fixed teak wood beading 4 mm thick half round all round the frame as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged drawer of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed
Material and labour for replacement of damaged box complete with locking arragements of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged shutter of box complete with locking arragements of table made out of 1 mm thick MS black sheet including making shape, welded with gas welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged legs of 25 mm square tube of wall thickness 1.6 mm and welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged long rail/centre stiffener by 25 mm square tube of wall thickness 1.6 mm and welding as shown on drawing complete all as specified and directed.
Material and labour for replacement of damaged Short rail /short stiffener by 25 mm square tube of wall thickness 1.6 mm and weldingas shown on drawing complete all as specified and directed.
Material and labour for replacement of unserviceable lock of drawer with new lock of 6 Lever 65 mm of approved quality with duplicate key.as shown on drawing complete all as specified and directed.
Material and labour for replacement of hard rubber shoe of black colour as per existing as approved.as shown on drawing complete all as specified and directed.
REPAIRS TO ALMIRAH LARGE STEEL ALL TYPES- FD-67M/1031 &1033 (for Item NO 25 to 34 ) Taking down old unserviceable lock of almirah large steel and supply and fixing new lock of suitable size provided with and fixed with screws with duplicate keys complete all as specified and directed
Material and labour fixed in repair for locking device with cover of almirah steel large including lock bar complete all as specified and directed.
Material and labour fixed in repair for door shutters by denting and necessary adjustment as required complete all as specified and directed.
Supply and fixing for new door shutters made out of 1 mm thick mild steel black sheet including taking down old unserviceable door shutters of almirah large steel complete all as specified and directed.
Supply and fixing for new chromium plated handle, fixed with screws incuding taking down old unserviceable handle of almirah large steel complete all as specified and directed.
Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of almirah large steel complete all as specified and directed.
Supply and fixing for new mild steel hinges, 100mm size of approved quality fixed with screws including taking down old unserviceable hinges of almirah large steel complete all as specified and directed.
Supply and fixing for new shelves made out of 1 mm thick mild steel black sheet made to shape including down old unserviceable shelves of almirah large steel complete all as specified and directed.
Material and labour for prepartion of welded steel surfacs of externally/ internally with putty ready for painting for denting to old chipped surfaces complete all as specified and directed.
Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.
REPAIRS TO ALMIRAH MEDIUM STEEL WITH SHELVE -FD-67M & FD-1032 (For Srl item No 35 to 44 ) Material and labour for Supply and fixing new lock of suitable size provided with duplicate keys as per sample, fixed with screws including taking down old unserviceable lock of almirah medium steel complete all as specified and directed..
Material and labour fixed in repair for locking device with cover of almirah steel large including lock bar complete all as specified and directed.
Material and labour fixed in repair for door shutters by denting and necessary adjustment as required complete all as specified and directed.
Supply and fixing for new door shutters made out of 1 mm thick mild steel black sheet including taking down old unserviceable door shutters of almirah medium steel complete all as specified and directed.
Supply and fixing for new chromium plated handle, fixed with screws including ,taking down old unserviceable handle of almirah medium steel complete all as specified and directed.
Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of almirah medium steel complete all as specified and directed.
Supply and fixing new mild steel hinges, 75 mm size of approved quality fixed with screws including taking down old unserviceable hinges of almirah medium steel complete all as specified and directed.
Supply and fixing for new shelves made out of 1 mm thick mild steel black sheet made to shape including taking down old unserviceable shelves of almirah medium steel complete all as specified and directed.
Material and labour for prepartion of welded steel surfacs of externally/ internally with putty ready for painting for denting to old chipped surfaces complete all as specified and directed.
Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.
REPAIRS TO LOCKER STEEL (FD-1029)( For Srl Item No 45 to 54 ) Supply and fixing for new legs made out of 1 mm thick mild steel black sheet including taking down old unserviceable legs of locker steel complete all as specified and directed.
Material and labour for replacement for old damaged hasp and staples with new hasp and staples chromium plated safety type 100mm long of approved quality complete all as specified and directed.
Supply and fixing for new chromium plated handle, 100 mm size of approved quality fixed with screws including taking down old unserviceable handle of locker steel complete all as specified and directed.
Supply and fixing for new mild steel hinges, 75 mm size of approved quality fixed with screws including taking down old unserviceable hinges of locker steel complete all as specified and directed.
Material and labour for repairing of door shutters for denting and necessary adjustment as required complete all as specified and directed.
Supply and fixing for new Top/ Bottom made out of 1 mm thick mild steel black sheet including taking down old unserviceable Top/ Bottom of locker steel complete all as specified and directed.
Supply and fixing for new locker steel door shutters made out of 1 mm thick mild steel black sheet including taking down old unserviceable door shutters of locker steel complete all as specified and directed.
Material and labour for prepartion of welded steel surfacs of externally/ internally with putty ready for painting for denting to old chipped surfaces complete all as specified and directed.
Supply and fixing for replacement of new chromium plated hanging rod of locker steel shape & size complete all as specified and directed.
Material and labour for prepartion of surfacs and welding to broken place complete all as specified and directed.
Charpoy GI Pipe with Naylon Niwar FD-220 (for Srl item No 55 to 60 ) Material and labour for re-tapping of charpoy GI Pipe 32mm dia with nylon niwar four ply, 50 mm to 55mm wide, white/light colour weighing not less than 1.5 kgs and more than 1.7 kgs per charpoy, closely wooven on both sides with14 numbers strandes on shorter side and 34 numbsers strandes on longer side, pulled tightly and the newar end be stiched at the starting & ending points. complete all as per specified and as directed. ( Note : Niwar should be double woven as per existing pattern. Cycled newar shall not be allowed)
Material and labour for replacement of GI 32mm dia of three way elbows ISI Mark complete all as specified and directed.
Material and labour for replacement of check nut 32 mm dia complete all as specified and directed.
Material and labour for long rails both side threarded for charpoy GI pipe 32mm dia medium grade pipe ISI mark complete all as specified and directed.
Removing of un-serviceable threaded/welded portion of old long rail and converting the same into two short rail both side and threaded as as required complete all as specified and directed.
Removing of un-serviceable threaded/welded portion of old short rail and converting the same into two legs and 3mm thick base plates to be welded at bottom complete all as specified and directed.
CHARPOY GI PIPE WITH PLY TOP FD-220: (for Srl item No 61 to 65 ) Material and Labour for replacement of 12 mm thick Plywood top on existing charpoy GI pipe after tightening/ repairing of frame/charpoy . plywood shall be 12 mm thick, commercial type, BWR grade, ISI marked of Make : Century ply/ Archid ply / green ply/ Kit Ply in single piece with teak wood beading all around.Plywood shall be fixed to charpoy frame with and including nuts, bolts and GI washers (minimum 10 Nos. per charpoy), dia of bolt not less than 8mm complete all as specified and as directed by the Engineer-in-charge.
Material and Labour for replacement stiffeners made of 25mm Sq MS Conduit pipe 1.6 mm thick and welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to Sq MS pipe pieces with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer all as specified and as directed by the Engineer-in-Charge.
Material and Labour for replacement three way elbow, 32mm dia, heavy duty, ISI marked for GI pipe charpoy all as directed.
Material and Labour for replacement new long rail for charpoy GI Pipe of 32mm bore GI pipe medium grade (ISI marked) long rails threaded on both ends one side 22mm and other side 40mm complete all as shown on Drg and directed by Engineer-in-Cahrge. Drawing No FD-220
Cutting and fixing old unserviceable long rail of charpoy GI pipe 32mm and converted into short rail obtained from ser No 1.5 above and threaded both ends one side 22mm and other side 40mm complete all as shown on Drg and directed by Engineer-in-Cahrge. Drawing No FD-220
REPAIR TO TABLE DINING 9(ORS) (FD-165M)(for Srl item No 66 to 71 ) Replacement of top of table dining for OR’s with 18/19 mm thick pre laminated Particle board (exterior grade)one side teak face ISI marked and shall be fixed teak wood beading 4 mm thick half round all round the frame all as per drawing,complete all as specified and directed byEngineer In Charge. Make of board Bhutan Board,Kitply,Century.
Material and Labour for replacement of damaged legs 25 mm square tube of wall thickness 1.6 mm and welding complete all as per shown on drawing and specified.
Material and Labour for replacement of centre stiffener and long rail with 25 mm square tube of wall thickness 1.6 mm welded to frame complete all as per shown on drawing and as specified .
Material and Labour for welding exceeding 6 mm but not exceeding 9 mm to broken place including preparation of surface all as per drg and directed by Eng in charge.
Material and Labour for replacement of short stiffener and short rail with 25 mm square tube of wall thickness 1.6 mm welded to frame complete all as per shown on drawing and as specified
Material and Labour forr replacement of hard rubber shoe of black colour and match as per existing complete all as per shown on drawing and specified
Material and labour for preparation of steel surfaces and filling cavities with putty including scrapping out old painted surface (external and internal) of Almirah large steel all type (FD-1031) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray painting complete all as specified and directed .
Description all as per Serial Iten No 72 above but Almirah medium steel all type (FD-1032)
Description all as per Serial Iten No 72 above but Locker steel (FD 257)
Description all as per Serial Iten No 72 above but Table office clerk steel (FD 1004)
Description all as per Serial Iten No 72 above but Table office Offrs steel (FD 1002)
Description all as per Serial Iten No 72 above butTeapoy verandah (FD-255)
Description all as per Serial Iten No 72 above but Table Dining ORs (FD-165 )
REPAIRS TO CHAIR EASY (FD - 229)( For Srl No 79 to 83 ) Material and labour for replacement of damaged front legs of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged rear legs of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged arm-rest of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged fillet for canning of seat and back of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged rail of seat and back of Chair easy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
REPAIR TO CHAIR DINING (FD-279 and FD-228) (For Srl item No 84 to 91 ) Material and labour for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged rear leg of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged back rest of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged stiffener of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged front rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged back rail of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged fillet for canning of seat of chair dining with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
REPAIR TO CHAIR WRITING (FD - 280 and FD-1107) (For Srl item No 92 to 99 ) Material and labour for replacement of damaged front legs of Chair writing made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged rear legs of Chair writing made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged back rest of Chair writing made out of well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged stiffener of Chair writing made out of well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side rail of Chair writing made out of well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged front rail of Chair writing made out of well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged back rail of Chair writing made out of well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged fillet for canning of seat of chair writing with well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
REPAIR TO TABLE 3’ X 2’ (WITH / WITHOUT DRAWER) (FD-283) (For srl item No 100 to 105 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, including 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new front rail of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new side rail of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of drawer with fancy knob as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
REPAIR TO TABLE WRITING (FD – 33,249,275) (for item No 106 to 110 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of drawer with fancy knob as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of shutter with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
REPAIR TO TABLE CENTRE (FD-274) (for Srl item No 111 to 114 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mmthick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged front rail of table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side rail of table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
REPAIR TO TEA POY (FD-232 and FD-278) (for srl item No 115 to 119 ) Material and labour for replacement of table top with 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged front rail of tea poy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side rail of tea poy with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
REPAIR TO PEG TABLE (FD-384) (For srl item No 120 to 122 ) Material and labour for replacement of table top with 18/19mm thick Pre- laminated Particle board (exterior grade) one side teak face, ISI Marked, incl 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of leg of peg table with new legs of required size made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged side / front rail of peg table with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
REPAIR TO BED PLYWOOD TOP (FD-246) (For srl item No 123 to 128 ) Material and labour for replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of leg of bed with new legs of required size made out of well seasoned 1st class Teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged long rail of bed with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of unserviceable head board of bed ply wood topas shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of unserviceable foot board of bed ply wood top as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of unserviceable short rail of bed ply wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
REPAIR TO TABLE OFFICE CLERK WOODEN (FD/DB) Srl item No 129 to 134 ) Material and labour for replacement of top of table office clerk wooden with 18/19 mm thick pre -laminated Particle board (exterior grade) ISI marked one side teak face incl 4 mm thick half round teak wood edging all round shall be fixed to the frame as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of new leg of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of new front rail of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of new drawer with fency crome plated knob of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of new stiffener of required size made out of well seasoned 1st class teak wood as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
REPAIR TO TABLE DINING FOR 6 PERSONS (FD-273 and FD-1115) (for srl item No 135 to 138 ) Material and labour for replacement of table top for table dining 06 persons 18/19mm thick Pre-laminated Particle board (exterior grade) one side teak face, ISI Marked, including 4mm thick half round teak wood beading shall be provided al-round the top of table as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged long rail of table dining 6 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Material and labour for replacement of damaged leg of table dining 6 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge
Material and labour for replacement of damaged short rail of table dining 6 persons with well seasoned 1st class Teakwood as shown on drawing complete all as specified and directed by the Engineer-in-Charge .
Replacement/Repair to following parts of Sofa Set 4/5 seater FD-1113 (For Srl Item No 139 to 146 ) Supply of foam cushion of size 530 mm X 565 mm X 100 mm thick (32 high density) covered with tapesty cloth (not less than Rs.200/- per mtr cost of cloth) including stitching with one side Zip complete all as specified and directed by Engineer -in -Charge.
Supply and fixing of wooden batten made of 1st class teak wood of size 40mmx40mm x570mmand shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of wooden batten made of 1st class teak wood of size 50mmx20mm x570mmand shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of back long rail made of 1st class teak wood of long piece (3 seater) of size 35mmx70mmx1730MM and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply supply and fixing of wooden frame for back made of 1st class teak wood of long piece of size 35mmx70mmx1660MM and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply supply and fixing of wooden frame for back made of 1st class teak wood of long piece of size 35mmx70mmx1730MM and shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of legs made of 1 st class teak wood hard of size 70mmx35mmx530MM & shape and length as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Extra overtapesty cloth (not less than Rs.200/- per mtr cost of cloth) including stitching with one side Zip complete all as specified and directed by Engineer -in -Charge.
Trestle Store Room (For Srl Item No 147 to 152 ) Supply and fixing of long rail made of 1st class hard wood sheeshamof size and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of short rail made of 1st class hard wood sheeshamof size and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of centre rail made of 1st class hard wood sheeshamof size and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of leg made of 1st class hard wood sheeshamof size and shape and length as as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing of PGI sheet 22 gauge on trestle wooden as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Preservative of trestle store room wooden with creaosote oil and used engine oil mixed ratio 50:50 complete all as specified and directed by the Engineer-in-Charge.
Recanning of wooden chairs (FP-229, FD-279, FD-228, FD-280, FD-1107) Material and labour for replacement old plastic cane from various type of chairs and recanning with 2MM new plastic cane good quality as directed Boarder of chair shall be canning with 3 MM as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Repair & recanning of chair verandah(FD-259, FD-256) (For srl item No 154 to 155 ) Material and labour for replacement of unserviceable parts of chair verandah with new conduit pipe of size 20 mm dia x1.6 G and fixing the same with electirc running welding to chair verandah wherever required to the existing chair varandah as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for replacement of unserviceable plastic cane from chair verandah and recanning of the existing with 4MM vide 1/2 Rd plastic cane good quality in Mat pattern including painting with two coat of synthetic enamal paint white before canning and 04 Nos PVC rubber shoes to the legs as shown on drawing complete all as specified and directed by the Engineer-in-Charge.
Material and labour for preparation of surfaces by removing of old existing fade out polish from Chair Easy (FD-229) wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of French polish of approved quality with high gloss finish on exposed surfaces as shown on drawing complete all as specified and directed by Engr-In-Charge.
All as per description srl item No 156 above but Chair dining (FD-279 and 228)
All as per description srl item No 156 above but Chair Writing(FD-280 and 1107)
All as per description srl item No 156 above but Table 3’ x 2’ with /without drawer( FD-284and 283 )
All as per description srl item No 156 above but Table Dining 06 Person
All as per description srl item No 156 above but Table writing (FD-275 and 249)
All as per description srl item No 156 above but Table Centre (FD-274)
All as per description srl item No 156 above but Teapoy (FD-232 and 278)
All as per description srl item No 156 above but Peg Table ( FD-384)
All as per description srl item No 156 above but Bed ply wood top/ Hard bed (FD-246)
All as per description srl item No 156 above but sofa set 4/5 seater
All as per description srl item No 156 above but Table Office Clk Wooden(FD-/DB)
Standard engineers
M/S INDAN FURNITURE MART
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .