Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC MOHAMMADPUR CHAIL KAUSHAMBI UTTAR PRADESH 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹10.6 L+₹71,289.90 (7.24%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹10.6 L+₹76,684.90 (7.78%)Rejected-Finance 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹11.4 L+₹1.5 L (15.5%)Rejected-Finance | L4 | Rejected-Finance Being not lowest |
Tender Value
₹9.9 L
EMD Value
₹19,800
Closing Date
2 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Vikash Singh, AE (E/M), AGE(I) AF Manauri
AGE (I) AF MANAURI PRAYAGRAJ
REPAIR TO JOINERY, ALUMINIUM DOORS, WINDOWS AND PARTITION AND OTHER MISC CONNECTED WORKS IN TECH AREA AND OFFRS ENCLAVE AREA AT AF STN MANAURI
2024_MES_648800_1
9163/E8
Open Tender
Civil Works
Item Rate
270 days
MANAURI PRAYAGRAJ
As per tender doc
7 documents required · 7 mandatory
₹500
AGE (I) AF MANAURI PRAYAGRAJ
₹19,800
Yes
9 Sept 2024
1 Apr 2024
4 May 2024
1 Apr 2024
2 May 2024
18 Apr 2024
Amount
Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed.
M&L brick work with sub class "B" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified and directed.
Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 finished even and fair complete all as specified and directed.
M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 finished even and fair complete all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of OBD over priming surfaces complete all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.
Taking down chowkhat with shutter without taking off shutter from chowkhat of any description not exceeding 1.5 Sqm each complete all as specified and directed.
Ditto all as above but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.
Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed.
Taking down Shutters of any description exc 1 sqm but n. exc. 4.00 sqm each complete all as specified and directed.
S & F steel windows with side hung shutters including projecting type hinges with steel handle and peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per Item No. 12.00 above but without glazing bars complete all as specified and directed.
S & F 1.0mm thick MS steel plain black sheet in hearth covering to door shutters covering to door chowkats (frames) chullahhoods, watertanks, water throughs, ducts, urinal troughs and funnel etc cut to size beaded if directed holes punched including round headed screws clout nails or rivets and fixed to wood or steel members etc with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitread angles stooped ends outlets etc as required complete all as specified and directed.
M&L for PCC type B-1 (1:2:4) 20 mm graded aggregate as in concrete for fixing holdfasts for bed blocks etc complete all as specified and directed.
S & F steel window or ventilator fixed type with glazing bars etc complete all as specified and directed.
Dismantling MS work of any description not otherwise provided complete all as specified and directed.
S & F MS framed work such as grills, gratings, frames,holdfast etc with ends of bars shouldered and or riveted or forgot into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work complete all as specified and directed.
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 complete all as specified and directed.
S&F rolled mild steel framed work Fe 410-W (Gde- E- 250) quality- A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S & F for pressed steel door frames of size 105 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
S & F for pressed steel door frames of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
M & L for PCC type C-1 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow pressed steel frame etc complete all as specified and directed.
S & F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for scuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S & F 30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat complete all as specified and directed.
S & F 35mm thick plain framed and panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkatsflush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 100mm size, ISI marked complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 75mm size, ISI marked complete all as specified and directed.
S&F extruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed.
S&F Aluminum barrel tower bolt 200mm complete all as specified and directed.
S&F aluminium anodised 300mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type all as specified and directed.
S&F aluminium anodised 200mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type all as specified and directed.
S&F Aluminum Barrel tower bolt 150mm complete all as specified and directed
S & F in replacement 100mm size hasp and staple aluminium anodised incl bolt to hinge plate and fixed with screws complete all as specified and directed.
Taking down aluminium chowkhat with shutter without taking off shutters from chowkhat of any type and size complete all as specified and directed.
Taking down aluminium shutters from chowkhat of any type and size complete all as specified and directed.
S & F powder coated (thickness of powder coating shall not be less than 50 micron) aluminium frame for doors, widows, ventilators with one or more tracks or rebates including joining cleats for fixing etc complete all as specified and directed.
S & F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed.
S & F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S & F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, rates, include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames. all complete as per architectural drawings complete all as specified and directed.
S&F sheet glass 4 mm thick,ordinary quality and glazing in squares but exc 0.5 sq. m in each pane complete all as specified and directed.
S & F 4 to 5mm thick Aluminium composite pannel high pressure laminated complete all as specified and directed.
S & F in replacement anodised aluminium grill (anodised transparent ot dyed to required shade according to IS:1868 with min anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/SS screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.
S&F 100mm size 6 levers safety lock for aluminium door complete all as specified and directed.
S & F 300mm MS ordinary rat tail rod pattern springs, incl roller and roller plate complete all as specified and directed.
S& F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or glavanized wire stables, beads or in steel windows,flyproof doors etc. complete all as specified and directed.
S&F in replacement stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F in repairs MS window handle left/right including necessary welding complete all as specified and directed.
S & F in repairs MS window peg stay 250mm size for supporting window including necessary welding complete all as specified and directed.
Hacking out old broken glass from metal frame including punching or drilling out old glazing complete all as specified and directed.
M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each pane complete all as specified and directed.
S & F solar control film 25 micron reflective type sticked to glass planes as per instructions of manufacturers including removal of existing film complete all as specified and directed.
M & L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of new or previously untreated surface of steel or steel based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down anodised aluminium door shutters, side hung or fixed type any size and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges, anodised section complete including floor door spring hydraulucally regulated complete all as specified and directed. Note: Floor door spring hydraulucally measured separetly ( if not repairable) as directed by Eng-in Charge in supply only items.
Supply only SS Cover plate hydraulic floor spring door closer single cylinder body embeded,adjustable for aluminium door complete all as specified and directed.
S & F in repairs stainless steel peg set of six complete all as specified and directed.
M & L for running welding in repairs of metal n.exc 9mm thick members complete all as specified and directed.
M & L floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 140 mm complete all as specified and directed.
S&F in repair stainless steel curtain rod 25 mm dia incl. brackets and curtain rod holders of suitable size at ends etc complete all as specified and directed.
S&F in repair 84''-144'' Adjustable wall mounted microfiber Double curtain rod of size(3.66x0.03)m and 25mm dia of rod for door and windows with brackets set curtains hanging extendable iron metal pipe holder with gold typho finial ncl. bracketx4, screws , fishers x12,finials x2, curtain pole x2, etc complete all as specified and directed.
S & F 18/19mm thick commercial plywood interior grade both sides fixed with screws to timber frame work edge chamfered including beading/battens as required including taking down old unserviceable complete all as specified and directed.
S & F 75mm anodised aluminium handles complete all as specified and directed.
S & F 0.9mm thick decorative laminate (sunmica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufactures instructions as complete all as specified and directed.
S & F 30mm width of flaps continuous piano hinges MS bright finish are electro galvanised complete complete all as specified and directed.
S & F auto concealted hinges SS size 103mm x 64mm x 28mm suitable for cabinet and wardrope complete all as specified and directed.
S & F in replacement SS modular type cutlery basket of size 20 x 19 x 4 inches with side sliding roller clip over SS channel on both sides fixed all as specified. Make of basket - 3 square or equivalent complete all as specified and directed.
S & F in replacement SS modular type cup & saucer basket of size 20 x 19 x 4 inches with side sliding roller clip over SS channel on both sides fixed all as specified. Make of basket - 3 square or equivalent complete all as specified and directed.
S & F in replacement SS modular type plane basket of size 20 x 19 x 6 inches with side sliding roller clip over SS channel on both sides fixed all as specified. Make of basket - 3 square or equivalent complete all as specified and directed.
S & F in replacement SS modular type plate/thali basket of size 20 x 19 x 8 inches with side sliding roller clip over SS channel on both sides fixed all as specified. Make of basket - 3 square or equivalent complete all as specified and directed.
S & F in replacement SS modular type plane basket of size 20 x 19 x 4 inches with side sliding roller clip over SS channel on both sides fixed all as specified. Make of basket - 3 square or equivalent complete all as specified and directed.
S & F in replacement SS modular type plane basket of size 20 x 19 x 8 inches with side sliding roller clip over SS channel on both sides fixed all as specified. Make of basket - 3 square or equivalent complete all as specified and directed.
S & F in replacement 18mm thick PVC celuka ply grade 1 quality, one side pre laminated and other side plain white colour to make kitchen cabinet/drawer shutters, book shelf, crockery self fixed with screws, solvent cement/adhesive as per manufacturers instructions complete all as specified and directed. Note : (i) Handles, ball catches & knob will be measured and paid separately under respective items. (ii) Quoted rates deem to be incl. fixing of cabinet on wall with appropriate rawl plug/dash through fasteners. (iii) Colour & design of prelaminated portion shall be approved by Engr-in-Charge.
S & F 75mm size brass handles, cast type, polished bright complete all as specified and directed.
S & F ball catches with 8mm dia steel ball and brass body and stiking plate complete all as specified and directed.
S & F 40mm dia cup board knob fixed with nut, screws & washers of MS bright finish complete all as specified and directed.
S& F in replacement stainless steel kitchen cabinet drawer rolling channel eye moove soft close ball bearing teliscopic channel of size 500mmx35mm in any colour complete all as specified and directed.
Note:- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri
Technological Associates
RK ENTERPRISES
sethi tradres
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .