Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹49.8 L+₹3.1 L (6.55%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹49.9 L+₹3.2 L (6.77%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹50.3 L+₹3.6 L (7.62%)Rejected-Finance | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹50.8 L+₹4.0 L (8.65%)Rejected-Finance | L5 | Rejected-Finance Not lowest |
Tender Value
₹46.9 L
EMD Value
₹93,700
Closing Date
19 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
ADDITION /ALTERARTION TO BLOCK NO B11 AND B12 (08 QTRS) AT DRDO TOWNSHIP, KANCHANBAGH, HYDERABAD
2024_MES_648358_1
8764/E8
Open Tender
Civil Works
Item Rate
270 days
Hyderabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹93,700
Yes
19 Jul 2024
29 Mar 2024
22 Apr 2024
29 Mar 2024
19 Apr 2024
12 Apr 2024
29 Mar 2024 - 5 Apr 2024
Amount
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster up to the height 7.0 M including disposal of rubbish to the dumping ground within 50 meters lead
Demolishing brick work in cement mortar manually / by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50 meter leads as per direction of Engr -in- Charge
M&L Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor 2nd floor level in all shapes and sizes in cement mortar 1:4 complete
Providing Half brick masonry with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in super structure above plinth level up to floor 2nd floor level in cement mortar 1:4
M&L 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and finished the surface fair and even without using extra cement complete .
M&L rendering 15mm thick in cement mortar C:M 1:4 on external wall surfaces in two layers (First coat 10mm thick and second coat 5mm thick ) including mixing of water proofing compound @ 2% by weight of cement only on top layer of plaster, finished even and smooth. (WPC will be measured and paid separately). Note : up to height 2th floor, double scaffolding shall be used.
M&L 6mm thick cement plaster 1:3 ( 1 cement : 3 fine sand) on ceiling surface finished with a floating coat of neat cement and thick coat of lime wash on top of ceiling when dry for bearing of RCC slabs and beams
M&L preparation of new plastered surfaces or unplastered surfaces of walls and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT
M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)
M&L for white washing on new work of ceiling surfaces (three or more coats) to give an even shade complete over plastered surface to prepare the surface even and smooth .
M&L preparation of new plastered surfaces or unplastered surfaces of walls and applying one coat of OBD as per manufacturers instructions complete all as specified and directed. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT
M&L for complete removal of existing treatment preparation surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)
M&L White washing on old surface and removing of old white wash on ceiling surfaces Old work (two or more coats) sqm to give an even shade complete.
M&L for applying two coats of white washing on old plastered surfaces of wall including preparing surfaces
Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to G+1 level, including digging out old sunken flooring excluding the cost of centering, shuttering and finishing.
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound 3% of weight of cement in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
S&F 40mm dia GI heavy garde pipe as in spout 45cm long incl making in holes in RCC and making good in cement mortar 1:1/PCC 1:2:4 complete all as specified and as directed.
Providing and fixing in repair water closet squatting pan ( Indian type WC pan) with 100mm sand cast iron P or S trap, 10 liter low level white PVC flushing cistern including flush pipe, with manually controlled device ( handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :- (i) white vitreous china Orissa pattern WC, pan of size 580 x 440 mm with integral type foot rests
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 meters lead) as per direction of Engineering-Charge. (a) Internal Work- Exposed on wall
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm nominal dia , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm nominal dia , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. Exposed on wall ,This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. and Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 meters lead) as per direction of Engineering-Charge
Taking out doors, windows and clerestory window shutters ( steel or wood) including stacking within 50 meters lead :- (i) of area 3 Sqm and below
S&F 125x60mm Pressed steel frames for doors with one or more rebates including lugs etc., complete, as specified and directed.
S&F 105x60mm Pressed steel frames for doors with one or more rebates including lugs etc., complete, as specified and directed.
Providing and laying cement concrete in retaining walls, return walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, sunken floors etc up to floor five level excluding the cost of centering shuttering and finishing :- (i) 1:2:4 (1 cement : 2 coarse sand ( zone -III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources )
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width of aperture 1.4mm in both directions with wire of dia 0.63mm, for doors , windows and clerestory windows with hinges and necessary screws :- (i) 35mm thick shutter withISI marked MS pressed butt hinges bright finished of required size second class red wood kiln seasoned
Providing and fixing factory made door frame ( single rebate ) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62mm width & 32mm thickness , frame will be mitred & jointed with self driven self tapping screws of size 38mm x 4mm & PVC solvent cement including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer -in- Charge.
Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm, painted with primer, all four corners of reinforcement to be welded or sealed. solid PVC extruded bidding ( push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and direction of Engineer -in- Charge. (i) Decorative finish ( both side wood grained finish)
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : size 125x65x2.12 mm
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm
Providing and fixing aluminum handles 150 mm , ISI marked , anodized ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete
Providing and fixing aluminum sliding door bolts 300 x 16mm and hasp, staple (bolt type), ISI marked anodized ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nut and screws etc complete
Providing and fixing aluminum tower bolts 150 x 10mm, ISI marked, anodized ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc complete
Providing and fixing aluminum Twin rubber stopper hanging floor door stopper, ISI marked, anodized ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade , with necessary screws complete
Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing steel E165 (Fe 290) confirming to IS 2062 -2006 work in gratings, frames, guard bars, ladders, railing, brackets, purling, gates and similar works welded in built up sections / frames work, including cutting, hoisting, fixing in position and applying priming coat of approved steel primer using structural steel as required
Painting on new steel surface ( two or more coats ) including a coat of approved steel primer ( red oxide primer) with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
supply and fix fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching to aluminum window
S& Fix aluminum hat and coat hooks solid body 250 mm long
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth up to 50 m and lift up to 1.5 m, as directed by Engineer-in- Charge: All kinds of soil
Demolishing cement concrete manually / by mechanical means including disposal of materials within 50 meters as per direction of Engr -in- Charge
Making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources) of 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand , including necessary excavation, levelling & dressing & finishing the top smooth.
M&L for 100 mm thick 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40mm in sub base nominal size derived from natural sources)
Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc complete on 20mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) :- (i) Light shade pigment using white cement
Cement concrete 1:2:4 ( 1 cement ; 2 coarse sand : 4 Graded stone aggregate 20 mm nominal size ) in pavements, laid in required slope in sub base as required including consolidation finishing and tamping complete
Providing and laying rectified Glazed Ceramic non skid floor tiles of size 300x300mm or any size, more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colors White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying vitrified tiles size 600 x 600mm in floor in different size ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % and conforming to IS : 15622 of approved brand & manufacturer, in all colors and shade , laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3 kg/Sqm including grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, pliers, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
Providing and laying vitrified tiles in different sizes ( size of tiles 600 x 600 mm) ( thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colors & shade , in skirting, riser of steps , over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg / Sqm including grouting the joint with white cement & matching pigments etc complete
Providing and laying Polished Granite stone flooring kitchen platform in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
M&L Kota stone 25 mm thick slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
M&L Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
Providing and fixing 18 mm thick gang saw cut, mirror polished, remolded and republished, machine cut for window cill, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, molding and polishing to edges to give high gloss finish etc. complete at all levels and Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
Providing and fixing skirting cupboard with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for raw plugs etc. and priming coat on unexposed surface complete : 18 mm thick
Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm
Providing and fixing oxidized M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 115 mm
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type
Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets, 3Sq cm bull nosed, splayed, chamfered or rounded on one edge or face.
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
S & F for 20 mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc
Providing and fixing in repair Stainless Steel A ISI 304 (18/8) kitchen sink, Kitchen sink with drain board, 510x1040 mm bowl depth 250 mm , as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required , waste pipe and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed by Engineer-in-Charge.
S&F Stainless steel plate rack of size 910x 750x 300mm complete all as specified and directed.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour 600mm long
Disconnecting damaged over head / terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engr -in- Charge
Providing and placing on terrace ( at all floor levels) polyethylene water storage tank, 1000 ltr capacity Is: 12701 marked , with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing in repair gun metal gate valve 20mm nominal bore with CI wheel of approved quality ( screwed end) complete
Providing and fixing in repair water closet squatting pan ( Indian type WC pan) with 100mm sand cast iron P or S trap, 10 liter low level white PVC flushing cistern including flush pipe, with manually controlled device ( handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :- (i) white vitreous china Orissa pattern WC, pan of size 580 x 440 mm with integral type foot rests
Providing and fixing in repairs wash basin with CI brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :- (i) White vitreous china flat back wash basin size 550 x 400mm with single 15mm CP brass pillar tap
Providing and fixing in repairs 600 x 450 mm beveled edge mirror of superior glass (of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 grms.
Providing and fixing in repairs C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore each
Providing and fixing in repairs C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 grms 15mm nominal bore.
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter
Providing and fixing in CP brass angle valves 15mm nominal bore for basin, mixed, geyser, urinal etc points of approved quality conforming to IS 8931
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
Providing and fixing uplasticised PVC connection 15mm nominal bore x 60 cm length pipe with PTMT nuts, collar and bush of approved and colour
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 meters lead : (a) 75 to 80 mm dia pipe
Providing and fixing on wall face unplasticised Rigid PVC 75 mm diameter water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
Providing and fixing PVC Coupler 75 mm
Providing and fixing Single tee PVC with door 75x75x75 mm
Providing and fixing Bend PVC 87.5° of 75 mm bend
Dismantling CI or asbestos rain water pipe with fittings and clamps including stacking the materials within 50 meters lead :- (i) 100mm dia pipe
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type 'A' including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion single socketed pipes :- (ii) 110 mm diameter
Providing and fixing on wall face unplasticised - PVC molded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type 'A' including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion :- (ii) Bend 110mm dia
Providing and fixing 75mm dia sand cast iron S&S trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors
Taking down existing roof treatment of any position with bituminous felt including plaster / loose concrete up to mother slab and removing rubbish to a distance exceeding 100 mtr and not exc 250 mtrs and roughing the surface of old concrete by picking, scraping, cleaning and washing down with water to remove all dust etc all as specified and directed.
Cement concrete 1:2:4 ( 1 cement ; 2 coarse sand : 4 Graded stone aggregate 40mm nominal size ) in pavements, laid in required slope and camber in panels as required including consolidation finishing and tamping complete
M&L for rendering 10mm in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @ 3% by weight of cement shall be carried out complete all as specified and directed by Engr-in-Charge. Note : WPC will be measured under separate item of this schedule.
Supply only integral water proofing compound,
Providing and carry out water proofing treatment to sound, moisture free concrete surface system includes proper surface preparation to remove loose dust, dirt, loose mortar, curing compound etc carry out cementitious injection grouting at leakage points and construction joints using cement slurry modified with Cebex 100 plasticized expansive ground admixture supplies in 225 gm pouch, treatment of construction joints using polymer modified mortar prepare by using Nitobond SBR latest's, application of polymer modified batter at floor, wall junction, filling of annular space around rain water outlet using contexture GP2 non shrink cementitious grouts. Undulated surface and pot hole shall be treated with epoxy mortar or putty to obtained sound/ leveled surface. Application of primer Nito proof WB primer on sound mortar slab surface. Followed by application of coat of Nito proof 600 PF liquid applied single component pitch free polyurethane coating supplied in 25 kg drum coverage @ 2.30 Kg/ m2 to achieve 1.5mm thickness in two coats complete including all tools and tackles as per manufacturers specification. Coating shall be having crack bridging of 2mm, elongation ( ASTMD 124 ) greater than 600 percentage, tensile strength ( ASTM D412) , 2.5 N/MM2 , recovery from elongation ( ASTM D412) , 95 percentage, 85 percentage of solid continents, tear resistance ( ASTM D624) , 15 KN/M, shore A hardness ( ASTM D2240) , 60, water vapor transmission not more than 1 gm / M2 ,water permeability ( DIN -1048) - NIL, services temperature - 40'c to 70 degree 'c , flash point greater than 70'C HSE guidelines :- It is recommended to provide adequate general and local exhaust ventilations, providing protection to Eye, face, Hand and other skin by wearing appropriate glouse, Google, face cilia, respiratory protectionist. directed in SDS of the product. laying 25cmx25cmx20-22mm thick PCC tiles machine pressed factory made as per IS-1237-1980 ISI marked over bedding layer 20mm screed in CM 1:4. The cement mortar screed shall be mixed with polymer based liquid water proofing additive @ 5% by weight of cement or as per manufacture's specifications /instructions and tiles joints shall be filled with 1:3 CM mixed with crude oil as per SSR-2009 (Part-I) complete all as specified & directed.
Providing and fixing square mouth S.W gully trap class SP-1 complete with C.I grating brick masonry chamber with water tight C.I cover with frame of 300 x 300 mm size ( inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :- (i) 150 x 100 mm size P type with common burnt clay F.P.S ( non modular) bricks of class designation 7.5
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in- charge.
M&L for followings :- (i) Removing plaster, loose concrete & finishes all around the columns, slabs & beams (on all four side incription of column to full height , three sidescription of beam to entire span & bottom of slab to area as directed) (ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible) (iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed) (iv) Removing visible rust along the length of reinforcement using hand tools as approved. (The Engr-in-charge may order sand blasting if rust is approved) (v) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed.
M&L for Providing & Pouring Micro concreting M-40 grade :- Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labor charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed. Note : The cost of micro concrete M-40 grade & Epoxy bond coat is included in this item.
M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed. Note : Form work shall be 100% leak proof. For purpose of payment area in touch with concrete shall be measured.
M&L for providing rust proof /anti corrosive treatment to bars :- (i) cleaning of all exposed bars (new & old) around (ii) Apply a single coat of Alkaline rust converting primer on around bars new & old as recommended by the manufacture (iii) Apply two coats of Epoxy phenol anti corrosive protective coat on bars around new & old as recommended by the manufacture. Note : Anti corrosive treatment shall be continuous especially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating.
M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note : Application of PMM shall be preferably be in coats of approximately. 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacture complete all as specified and directed.
Steel reinforcement for RCC work ready to use "cut and bend" and welding rebars of approved make from factory / workshop to construction site including placing in position and binding all complete above plinth level up to 3rd floor roof slab projection and welding where is necessary. (i) Thermo / Mechanically Treated bars of grade Fe- 500D or more
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, raw plugs etc., complete.
Providing edge molding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc, complete as per design approved by Engineer-in-Charge.
Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window up to 1.75 sqm).
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (a) Casement window double door wire mesh and glass openable panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window up to 0.75 sqm.)
Making the opening in brick masonry for door/ window/ clerestory ventilator for exhaust fan window including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba / rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer -in-Charge
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 2KM initial lead, for all leads including all lifts involved.
Taking down copper / aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc, complete .
M&L for Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 V grade drawn through and including 20mm dia PVC conduit, medium grade, and conduit accessories, concealed in the walls /ceiling and terminated to sunken metal box of modular type and including provision of GI modular box ISI marked in the walls suitable for modular switches, sockets etc., and including modular white plates for fixing modular switches, sockets / regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly with brass screws, washers, copper lugs etc., complete all as specified and directed for one light / fan point /bell point/ceiling fan point/exhaust point controlled by one, one-way switch 5 Amp
All as per Sl. Item No. 109 here-in-before but for one 3-pin 5/6Amp socket outlet point on independent board controlled by one one-way 5/6Amp switch, complete.
All as per Sl. Item No. 109 here-in-before One light point controlled by two way 6 Amps switch.
All as per Sl. Item No. 109 here-in-before but for one 3-pin 5/6Amp socket outlet point on same board controlled by one one-way 5/6Amp switch, complete .
M&L for Point wiring complete with 4.0 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in the walls /ceiling and terminated to sunken box of modular type and including provision of GI modular box ISI marked in the walls suitable for modular switches, sockets etc., and including modular white plates for fixing modular switches, sockets / regulators etc., including 4.0sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly with brass screws, washers, copper lugs etc., complete all as specified and directed for 3-pin 15/16 Amp socket outlet point on independent board, complete.
S&F modular switch one way 6 amps 1 module 230 volts 50 Hz complete.
Supply and fix Modular switch one way 16 amps 1 module 230 volts 50 Hz complete.
S&F Modular switch two way 6 amps 1 module 230 volts 50 Hz complete.
S&F modular fan step type regular two module 230 volts 50 Hz complete.
S&F modular socket out let 6 Amps 230 volts AC 3/5 pin multipurpose type double modular complete.
S&F modular socket out let 6/16 Amps multipurpose double modular complete.
S&F Modular Bell push 5 Amps one module complete.
Supplying and fixing brass batten/ angle holder including connection etc. as required.
S&F ceiling rose two to three terminal surface backlight type AC 50Hz 230 volts complete
Supplying and fixing call bell/ buzzer suitable for single phase, V, complete as required.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. including connecting up with twin core flexible copper conductor cable with suitable size.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 2 poles and 40 amps current carrying capacity in the MCB DB complete with connection testing and commissioning.
S&F sheet metal enclosure MCCB DB VTPN double door type AC 415 V 4 way with 200 Amps rated bus bar, vertical type with MCCB 63 A 4 Pole 16 KA as incomer flush to wall & outgoing MCBs/isolators including taking down old one complete and making good of destructed surface including taking down old one complete
Supplying and fixing following way ,single pole and neutral, sheet steel, MCB distribution board 12 way 240 V, on surface.recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthling etc.as required.
M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC FRLS insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 1 run of 6.0 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete.
M&L for sub main wiring complete with 2 runs of 1.5 Sqmm PVC FRLS insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 1 run of 1.5Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete.
Earthing complete with GI earth plate electrode 600x600x6mm buried directly in ground vertically to a depth of not less than 2.25mtr below ground level than 1.5mtr below ground level connected to GI earth wire 4mm dia by means of bolts washers etc made out of GI earth wire will be protected by galvanized iron pipe light grade 15mm bore up to main distribution board/main switch including necessary excavation and earth work PCC 1:3:6 type CI (using 20mm graded stone aggregate) RCC cover 1:2:4 type B1 including necessary reinforcement etc complete all as show on electric plate No.3 of MES Such Part-I.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthling etc. complete as required.
Supply & fix light duty exhaust fans metallic body AC single phase 230/ 240 V of size 300 mm sweep with louver
Taking down carefully existing serviceable electric meters single phase and refining the same to its original location after completion of building work
Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required
Supply and fix LED building security light 25 W IP66, street light with and including wall mounting MS bracket and clamps complete.
S&F Metal clad AC earth plug and socket with sheet metal enclosure with MCB SP 20A complete .
S&F modular TV socket outlet with 1 module,230V 50hz
M&L XLPE insulated ,around, heavy duty electric cable with aluminum conductor, 1100 volts grade, cross-sectional area 50 sq mm 3 1/2 core including taking out old cable.
Removal of excavated soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft/loose soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick using soil complete all as directed.
Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed.
Supply and spreading of dry river sand in trenches/ transformer yard / two pole structure yard for cable protection complete all as directed by Engineer-in-Charge. Note:- Punned thickness only shall be measured for payment purpose.
M&L for laying common burnt bricks, sub class 'B', of size 230 x 115 x 75 mm in trenches for cable protection complete all as directed.
Supply and lay steel water tubing medium grade ISI marked including fittings such as Tees, bends, union, elbows, nipples, collars, sockets, reducer, clamps etc, fixed in wall ceilings, laid in trenches etc all as specified and directed for 50mm (2') dia bore
All as per item No. 147 above but 25 mm (1" dia)
All as per item No. 147 above but15 mm (1/2" dia)
S & F gun metal gate valve ISI marked 50mm with iron wheel head screwed both end for iron pipe and fix including all as specified and directed.
All as per item No. 150 above but 25mm bore
Excavation in trenches, not exceeding 1.5mm wide and not exceeding 1.5m in depth for laying of pipe line and getting out in any type of soil complete all as directed.
Returning filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm thick using soil complete all as directed.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for any thickness of tiles
Removal of excavated soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed.
M/s K Venkateswara Rao
Bismi Engineering
WELDECOR
MM PROJECTS
asmath enterprises
M/S PAVANI ENTERPRISES
M/s ANUSHA ENTERPRISES
Anjana corporation
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .