Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.5 L
Closing Date
9 Jun 2026, 3:30 pm2d left
Provision and improvement of Passenger amenities like train display boards, announcement system, etc at AYC station of Northern Railway, Lucknow Division.
106-Tele_Tender_06_26-27
106-Tele_Tender_06_26-27
Open
270 Days
Lucknow, Uttar Pradesh
₹0
₹3.5 L
19 May 2026
19 May 2026
26 May 2026
"Supply of managed SDH (STM-1 Add/Drop MUX and upgradeable to STM-4) fully wired for 2 X 63 MB and equipped for 21E1s and a Virtual Container (VC)-12 with STM-1(L1.1) aggregate interface including power supply, order wire, Ethernet card, sub rack, inbuilt DDF, installation material and all other accessories, manuals etc. as per TEC. Specification GR SDH 04/02, March 02 or with latest amendment. The contractor will supply all other accessories as mentioned in 01 the above said TEC Specifications and system will have provision of different redundancy cards as per the TEC Specifications. Note: It shall be possible to increase capacity from 21E1 to 63 E1s by adding / inserting tributary cards. This includes connecting all pig tails, optical patch cords etc. to the SDH equipment. This also includes connecting the SDH equipment with all cards to the 48V Bus including supply of wires and connectors. Termination of all E1s on DDF taking PVC cable over runway or a wall. At the terminal station, one port may be disabled if required as per instructions given by site engineer incharge. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply and installation of 19"" 42U Rack covered Rack of size 2035 mm x 600 mm x 600 mm (Approx.) as per Drg. No. CSTE/NWR/SOR/24 with all accessories like Electrical fitting, Fan tray, Patch Panel, cable manager, SPD for housing IP storage unit. The rack shall be complete with 02 all fittings for housing SDH equipments, Primary MUXES, DDF, MDF using crone modules and other equipments like runway ladders etc completely wired and equipped with integrated protection modules for all channels as per technical specifications and other stipulations of tender document. It should be possible to lock all the equipments with only order wire telephone remaining outside the rack INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Standard 19"" Rack mountable, -48V DC Working, Add-Drop STM-4 SDH 03 Equipment conforming to TECGR supply, 2 Nos. STM 4 ofAggregate L 4.2 Opticalinterface Modules/Cards, oneeach for East and West sideTX/RX and 2 nos. of STM-1S1.1 or L1.1 Optical interfacemodules complete with 5 mts.long Optical Patch Cords, 63E1s card with DDFs and Cableassembly for termination toDDF and minimum 8 nos. of10/100 Base-T EthernetPorts/Fast Ethernet on SDH(EoS) 10/100 Base-T interfaceModule/Card supporting withLCAS and GFP, Order wire subrack, DDF installation Material,Manuals and other accessoriesalong with CompleteEngineering Order Wire (EOW)arrangement. Note : i) Itshould have necessarysoftware/Firmware forLocal/remoteMonitoring/Configuration of theequipments through NMS ii)Two no MCBs of appropriaterating alongwith necessaryconnecting cords and cables forPower Supply Module/Cardshould be supplied andinstaaled as per instruction onsiteincharge.""No.GR/SDH/- 010/03JA 2011 (with latestamendment) complete with redundant power. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation and wiring of SDHSTM-4/ADMs primary dropinsert multiplexers with allaccessories, 19" rack withsuitable stand/ platform madeof MS angle/CC , power supplyboard FDF 04 racks (Alreadyinstalled) , DDF with miniature'U' link type for 63E1s , runwayladder , etc. This includesconnecting all pig tails, opticalpatch cords etc. to the SDHequipments. This also includesconnecting the SDH andprimary MUX equipment withall interface cards to the 48VBus including supply of wiresand connectors , termination ofall E1 on DDF , taking PVCcable over runway or a walland termination of VF interfacecircuits to the krone type.
"Supply of 2 Mb Programmable Primary Digital drop insert multiplexer as per RDSO Specs. IRS TC- 68/2004 (Amnd.1) or latest with conference facility and other stipulation to tender documents and fully wired for 30 channel complete with power supply card, remote control, supervision facility and all other accessories, installation material, manuals etc. It should have facilities to accommodate data interface card in multi drop mode and should be able to support cards needed for video conferencing and ISDN. It shall support NMS installed at Test Room and may 05 operate local/remote location of entire section. It also includes submission of all technical documents, manuals and supply of all miscellaneous items which will be required for final testing and commissioning of system. The above MUX should be equipped with following circuits: - i) 2 wire/ 4 wire E&M VF circuits ( minimum 16 nos ckts) ii) Subscriber loop circuits ( minimum 4 nos ckts) iii) Exchange loop interface circuits (minimum 8 circuits ) iv) This also includes connecting all pigtails, optical patch cords etc to the SDH equipments. This also includes connection of SDH and primary MUX equipment with all interface cards to the 48V Bus including supply of wires and connectors termination of all evens on DDF taking PVC cable over runway or a wall and termination of VF interface circuit to the Krone type. INSPECTION: RITES FOR SUPPLY PORTION"
Supply of 4wire DTMF way station equipmentIRS TC 60- 2007 & 4 Wire Control phone as per IRS TC - 38 / 97 with audio visual indication and reset button fitted on telephone conforming to specification no. IRS TC 60-2007. INSPECTION: CONSIGNEE FOR SUPPLY PORTION."
Supply of Power Supply Unit for 4 wire DTMF way station control telephone conforming to spec no. IRS.TC-72/97 or latest with 12V/7AH MF battery. INSPECTION:CONSIGNEE FOR SUPPLY PORTION."
"Supply of VF Tapping & Termination Transformers 2T/1120-470 Ohm as per IRS-TC- 22/76 with Amd-1 with latest amendments. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply and installation of 10/100 Mbps LAN Extender as per RDSO Spec. No. 09 SPN/TC/82/2013 Rev.1.0 or latest operating on built in AC 230 V power supply (similar to D-Link make). The items should be supplied with Configuration of Modems for use in railway application. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply, installation, testing and commissioning of Media Converter fiber to Ethernet 10 100 base T Signal mode fiber with all required accessories including AC 230 V to DC Power adapter, as per Clause No. 16 of RDSO Spec. RDSO/SPN/TC/65/2016 (Rev.4.0) or later INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply and Installation of 28 port Fiber Switch with 24 SFP and 04Combo Ports(Fully 11 equipped) of Make Techroutes/DLink/ Digisol/Novel/ Cisco or similar. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost. Material Inspection by Consignee.The work is to be executed as per the instruction of Railway Site Engineer. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Modem pairs V35&G-703,2 wire leased line 2mbps(Nx64 KBPS). Make- Team engineer, Atrie or similar INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of layer-2 switch ( minimum 8 +2 manageable ) with 08 Nos. 10/100/1000 13 Mbps ethernet port and 02 nos.1000 baseX SM SFT port with optical modules complete with all accessories etc. as per RDSO specification no. RDSO/SPN/TC/65/2021 version-6 or latest INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of ROUTER 02 LAN/04x02 MBPS WAN 50 KPPS,MODEL CISCO 1841,HP, JUNIPER WITH THREE YEAR WARRANTY MAINTAINANCE,MAKE-CISCO 1921 K9 OR SIMILAR. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Router with configuration of four copper 10/100/1000-Mbps interfaces, 15 four combination copper/fiber GbE port, two GbE SFP ports, and two 10 GbE SFP+ ports make Juniper model ACX2200 or Cisco or superior with similar or better specs (Aggregator switches with SFP ports) INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply, Fixing & wiring of magneto telephones with all accessories including Standard battery box and 3 nos. of RR cells in the ASM office with crank handle locations/ K-points 16 and interlocked L-xing gates as per instructions of the site Engr. All fixing materials including Standard battery box and 3 nos. Of RR cells to be supplied by the contractor. (Handle type magneto telephone suit IRS TC:36-97 (Amndt.1) or latest with latest amendments.) INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of 48V, 50A bateeryCharger for Teleocm use as perRDSO/TL/23/99/Ver 4.o 17 orlatest in N+1 configurationusing 3 Modules of 25A withautomatic switching betweenthe modules for two sets of200AH Battery. It shall beequipped with surge andlightening protection of Class-B& C. INSPECTION: RDSO FOR SUPPLY PORTION"
Installation wiring commissioning of 48 volt / 50Amp SMPS based charger alongwith the power supply wiring from Power room to equipment room in ladder, wire, SPD, MCB,ladder and any other materialrequired for installation will bearranged by the contractor.
"Supply of maintenance freeVRLA secondary cells dulycharged of 48V 200AH 19 andeach 2.0V when fully charged200AH capacity along withaccessories i.e. inter sellconnectivity links/float. 4 Nos.insulators for each cell 24 Nos.of cell per set as per RDSOSpec. IRS/S/93/96A with latestamendments with cuticlesteel/hylem tray battery rackto install/house batteries. INSPECTION: RDSO FOR SUPPLY PORTION"
"Supply of Power Supply, SMPS, 12V-For Equipment: Transreceiver HF/VHG/UHF, Mobile/Static, Output: Current: 15A. Charging: Float and Boost INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Step Ladder Aluminium made of BATHLA make or better of App. 5 feet Height INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of 12 Volt 65 AH VRLA Maintenance free storage battery as per IRS:S- 23 93/96(A) (Amendment 1.0 or latest) along with power supply SMPS, 12V charger for equipment Trans receiver, HF/VHF/UHF, Mobile/Static, Output current: 15A, Charging: Float and Boost. Appropriate rapid 12V/15A battery Charger. INSPECTION: RDSO FOR SUPPLY PORTION"
"Supply of 12V/120AHMaintenance Free Battery as per IRS:S-93/96(A) (Amendment 1.0 or latest) of AmarRaja, HBL or Exide Make INSPECTION: RDSO FOR SUPPLY PORTION"
"Supply of Caller ID Analogue Phone Having 10 one touch key Make Beetel. (Caller ID 25 Corded Landline Phone with 16 Digit LCD Display & Adjustable contrast,10 One Touch Memory Buttons,2Ways Speaker Phone, Music On Hold, Solid Build Quality, Classic Design) (Specification attached at Sl. No. 52) INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of 4G VoLTE fixed wireless phone as per attached specification. Make Beetel, Model F-3 4G INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply, installation, testing, wiring & commissioning of Wi-Fi smart mesh Router D- Link EXO DIR2600/Juniper or other reputed make with similar or better specs. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of AHUJA AM-24DP MEGAPHONE MEGA PROFESSIONAL AUDIOR (AHUJA AM- 24DP) Make Ahuja or similar. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of workstation suitable for fault analysis or other application. Note:- 29 Workstation configuration are as follows: Intel Core i5 10500 or higher, 16 GB RAM, HDD 1000 GB, SSD 512 GB Windows 10/11, 2K display 21.5 Inch. It also includes supply of Laser Printer (Make HP/Brother or better). INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of All in one Laser Jet printer as per technical specification Make HP, Samsung, Brother, Epson (similar to HP Laserjet Pro M128fn) INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Portable Servicr terminal. Service terminal configuration are as follows: Intel Core i7 10500 or higher, 16 GB RAM, HDD 1000 GB, SSD 512 GB Windows 11 INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Central Data Controller Unit conforming to system requrement as per RDSO Spec.. RDSO/SPN/TC/108/2019 Rev. 1.0 or latest. The control cosole shall have main and standby CP to work in standby mode, one Nos. of 1 KVA UPS with two independent batteries, two LCD monitor (19 inch), CCU Rack, KVM Switch, CDS (Layer-3 Swtich of make CISCO, HP, Juniper, Brocade, Avaya, Extreme, Netgear, D-link or similar) and other accessories, housed in a standard size cabinet along with driving Software for integrated passenger information system as per RDSO 32 Specification No. RDSO/SPN/TC/108/2019 REV.1.0 or latest. This includes supply and isntallation of SW for Announcement system with necessary interface and announcement recording (Hindi/English/ fresh studio copy of voice files.) as per RDSO Specification No. RDSO/SPN/TC/108/2019 REV.1.0 or latest ( the same to be interfaced with existing audio and video system insatalled at the station.). The software should support all types of display/announcement by merely adding necessary hardware in future ( single/multiline arrival/departure train information display boards. (single sided/double sided), CGDB, AGDB, LCD/LED/Plasma TVs etc. INSPECTION: RDSO FOR SUPPLY PORTION"
Installation, testing and commissioning of CDC set as per RDSO Specification No. RDSO/SPN/TC/108/2019 Rev.1.0 or latest as supplied above.
Complete wiring, testing, integration and commissioning of IPIS system as per scope of work. This shall includes all connecting cables, connectors etc. Inspection: Consignee
"Supply of Platform Data Controller (PDC) conforming to System requirement of 35 RDSO Spec.. RDSO/SPN/TC/108/2019 Rev1.0. or latest. It consists of 8 Ethernet port and 8 serial port for field device and 2 SFP optical port to connectivity with CDC. Optical ports are used whether the distance between PDC & CDC is more than 80 meter as per Set as per RDSO Spec.. RDSO/SPN/TC/61/2015 Rev 4.0.Amd.1 or latest. INSPECTION: RDSO FOR SUPPLY PORTION"
Installation, testing and commissioning of PDC as per RDSO Specification No. RDSO/SPN/TC/108/2019 Rev.1.0 or latest or latest as supplied above.
"Supply, Installation , testing &commissioning of double face Four Line Coach Position Train formation At a Glance Display Board(AGDB) as per RDSO spec no:-RDSO/SPN/TC/108/ 2019(Rev-0.0) orlatest INSPECTION: RDSO FOR SUPPLY PORTION"
"Cutting of all types of platforms/road crossing and trenching and excavation to a width and depth of 300 mm x 300 mm, laying of DWC/HDPE/GI pipe in the trench and refilling and concreting it afterwards as per original condition. In hard rocky ground area , cables will be laid 38 normally on layer of soft earth of 0.05 mtrs thickness previously deposited at bottom of the trench . The cutting to be filled and finished with cement/concrete, as per the RDSO drawing no. SDO/Cable laying/008, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest."
"Supply, installation, testing, wiring & commissioning of Layer-2 managed Switch (24 39 ports 10/100/1000 BASE-Tports, 4x 1G SFP+ ports) as per RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0 orlatest make HP/Cisco/Juniper or other reputed make with similar or better specs. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of STP (Shielded Twisted Pair)CAT 6 Cable as per RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0 or latest. INSPECTION: CONSIGNEE"
"Supply of OFC single mode 6 Fiber Armoured cable/STP CAT-6 Cable as per site 41 requirement and instruction given by site in-charge. The CAT-6 cable should be compliant with TIA/EIA-568B or latest standards from reputed make. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Laying of OFC/Power cable/CAT-6 cable PA Cable/Data cable and all the other types of telecom cable and all the other types of telecom cable through HDPE pipe/casing capping/fall ceiling 42 with laying/fixing of HDPE pipe/casing capping/uPVC pipe for connecting/interfacing variouys cpmponents and system integration. All materials for jointing and termnaition of power cable/CAT-6 cable as per site requirement are to be supplied by contractor. This item also includes supply of RJ- 45 connector with cap for terminating CAT-6 cable and supply and installation of power board with 4 points (3 nos 5 amp sockets and 1 nos 15 Amps socket) as per site requirement.
Supply of power cable 3 core, 2.5 sq mm, multi strand (36/0.3 mm dia) cable as per IS 694:1990 reaffirmed 1995 or latest suitable for Railway electrification area, shall be of reputed make like Havells, Delton, LAPP, Finolex, or superior. INSPECTION: CONSIGNEE
"Supply of PVC conduit pipe (minimum 25 mm dia./1.55 mm thick, 3 metre long and ISI brand) with flexible pipes fixing /laying materials and all other accessories as per requirement. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of 40 mm outer dia. PLB HDPE duct as per RDSO Spec. No. RDSO/SPN/TC/45/2013, Rev 2.0 or latest with all accessories (like couplers, bends etc). INSPECTION: CONSIGNEE"
Laying of PLB HDPE pipe in trench/open space, fixing and clamping of HDPE pipe on 46 wall or structure and sealing of the duct after laying with proper fixing material. All the accessories like couplers, end caps/plugs to be provided by the contractor within the same cost and its protective work as per direction of site engineer.
"Supply of 12 port loaded LIU rack mountable, LIU shouldbe provided for terminating the optical fiber cables. It shall provide minimum bending radius and splice trays shall function as a 47 splice cover for Pigtail Splicing. Cable glands shall be provided for secure anchoring of incoming cables. Rubber grommets shall be provided at the cable entry point for tight sealing. The splice tray should be made of ABS materials. LIU should be of reputed make. Make: D-Link/3M/ Digilink/Molex/ DAX or similar. INSPECTION: CONSIGNEE"
Installation, Testing & Commissioning of rack mountable 12 port Loaded LIU. All the accessories and fixing materials required for this installation are to be supplied by contractor within the same cost.
Supply and installation of 9U, 19 inch rack for pole mount/ wall mount with Fan 49 230VAC 90CFM-02 Nos., AC distribution box (5 socket of 5A, Power On LED indicator, MCB)- 01 No., Shelf Cantilever 1U: 01 No. Cable Manager 1U:01 No. INSPECTION: CONSIGNEE FOR SUPPLY PORTION 2437959.7
"Supply of True color Indoor Video Display (OVD) size Pixel Resolution (WxH) 432x128 (6 Line Single face) as per RDSO specification No: RDSO/SPN/TC/108/2019 Ver 0.0. INSPECTION: RDSO FOR SUPPLY PORTION"
Installation, Testing and commissioning of True Colour Video Display (OVD) Size Pixel Resolution (WxH) 432x128 as per RDSO specification No: RDSO/SPN/TC/108/2019 Ver 0.0
"Supply & installation of PA amplifier (Dual Zone model TZA - 4000EM Ahuja make or similar) . This includes all required fittings and wiring material supplied by contractor at his own cost as per instruction of site engineer. (INSPECTION: CONSIGNEE FOR SUPPLY PORTION)"
Supply of 15 watts Column speaker, matching transformer and driver unit, make reputed as SCM- 15T of Ahuja make or similar. as per RDSO specification no. RDSO/SPN/TC/63/2006 Make Ahuja, Philips, Sony, AKG or similar. INSPECTION:CONSIGNEE
Supply of Mike AHUJA ACM-66CH or superior mak. as per RDSO specification no. RDSO/SPN/TC/63/2006 make Ahuja, Philips, Sony, AKG or similar. INSPECTION:CONSIGNEE
"Supply of 15 watts Horn Speaker with 10 watt tapping, matching transformer and driver unit, make reputed as UHC-15XT as per RDSO specification no.RDSO/SPN/TC/63/2006 make: Ahuja, model no. UHC 15XT, Philips, Sony, AKG or similar. INSPECTION:CONSIGNEE "
"Supply of Ahuja BTA 660M Portable 40 Watt Speaker with Amplifier -Elegant and stylish looking plastic moulded cabinet PA Amplifier Set with Trolley System. -Two Mic inputs, Two Wireless Mics, one Aux input & one Music input. Mic1 has selectable priority over all other inputs. - 56 Built-in 203 mm (10") 4 speaker & 8 HF driver. -Built-in MP3 Player with Bluetooth, Recorder, SD Card and Remote Control. Built-in Digital Echo effects. -Tone control for setting the desire tonal quality. -LED indications for low battery, charging & clip output. Auto cut-off feature prevents battery deep discharge. -Operates on AC mains, external 12V DC or built-in 12V 7Ah rechargeable battery. Make Ahuja or similar. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply, Laying, testing and Commissioning of twin core screened cable 0.9 sq. mm annealed tinned copper conductor confirming to IS-694/90.(material required for wiring is supplied by the contractor) INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Supply, Installation,Testing & Commissioning of Platform Dual face, 4 digit, GPS 58 synchronised digital double faced Digital platform clock as per RDSO Specification no. RDSO/SPN/TC/65/2008 Rev.3.0. Amdt1 & Amd 2 or latetst, with LED of Blue/Red/White color and size approximately 762 x 381 x 228 mm. It also includes all fitting arrangements. (color to be decided by Railways). INSPECTION: RDSO FOR SUPPLY PORTION
"Supply, Installation of GPS Based synchronization digital tower clock length-12 feet, breadth 3feet and width 6 inch (approx) Make: Roy Bros & Co./Sun Electronics/Indiana Watch or equivalent., specification attached at Sl. No. 110. INSPECTION: RITES FOR SUPPLY PORTION"
"Supply, Installation, Testing &Commissioning of 5 KVA On Line UPS with isolation transformer as per RDSO spec no. RDSO/PE/SPEC/0023-2001(rev 0.0) amnd 2.0 or latest suitable for 60 single phase AC input & single phase AC output, floor mounted type, of make APC/Luminious/microte/liebert/Numeric idicative backup time 120 minutes. This also includes supply of one battery rack and one set (for input and output) compatible MCBs complete with cover & fixing materials. Make: Havells, Anchor or similar. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of 2 KVA ONLINE UPS WITH TWO HOUR BACKUP ,HAVING SMF BATTERY 4680 TO BE OPERATED IN INPUT VOLTAGE OF 160-260V 50 Hz AC,INPUT OVER VOLTAGE PROTECTION 280 VAC ,INPUT UNDER VOLTAGE PROTECTION 155 V AC,WITH MANUAL BY PASS PROVISION,OVER LOAD 61 CAPACITY OF 125 % OF RATED LOAD UNDER TEST FOR 60 SEC. WARRANY OF 2 YEARS FOR UPS AND BATTERY, INDIACTIONS SHALL BE MAINS ON ,BATTERY CHARGER ON ,BATTERY ON LOAD ,BATTERY LOW, INVERTER ON ,INVERTER TRIP,OVER LOAD ,DC -ON MINIMUM VAH 4680 PREFFERRABLE MAKE :HYKON HITACHI,NUMERIC,TECHSER,AMARAJS,V GUARD INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Online UPS system, Single Phase of rating 1 KVA UPS along with Battery suitable for 1 hr. back-up. Make: MICROTEK, LUMINOUS. EXIDE. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Rack mountServers to work as IP-PBX. The server shouldbe installed with UbuntuServer LTS 22.04 &Asterisk 18.13.0 LTS orLatest supporting 50ports upto 500 ports.(Detail specificationattached in Annexure -B). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation,Commissioning & Testingof Rack mount Servers towork as IP-PBX. Theserver should be installedwith Ubuntu Server LTS22.04 & Asterisk 18.13.0LTS or Latest 64 supporting50 ports upto 500 ports.The work is to executedas per the instruction ofRailway Engineer..
"Supply of 48 port FXSGateway. (Detailspecification attached inAnnexure - C).MaterialI INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation,Testing &Commissioning of 48port FXS Gateway. Thework is to executed asper the instruction ofRailway Engineer.
"Supply of 04 Port PRI/ E1Gateway .(Detailspecification attached inAnnexure -D). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation,Testing &Commissioning of 04 PortPRI/ E1 Gateway. Thework is to executed asper the instruction ofRailway Engineer.
"Supply of 16 port FXOGateway.(Detailspecification attached inAnnexure -E). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation,Testing &Commissioning of 16port FXO Gateway. The work is to executed asper the instruction ofRailway Engineer.
"Supply of ManagementConsole.(Detailspecification attached inAnnexure -F). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of non-Executiveopen standard SIPphone.(Detailspecification attached inAnnexure -G). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation,Testing &Commissioning of non-Executive open standardSIP phone. The work isto executed as per theinstruction of RailwayEngineer.
"Supply of Supply ofVideo VoIP phone.(Detailspecification attached inAnnexure -H). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation,Testing &Commissioning of Supplyof Video VoIP phone. Thework is to executed asper the instruction ofRailway Engineer.
"Supply of 24U Rack withPDU, FAN and otheraccessories .(Detailspecification attached inAnnexure -J). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation,Testing &Commissioning of 24URack with PDU, FAN andother accessories. Thework is to executed asper the instruction ofRailway Engineer.
"Supply of caller IDTelephone with two wayhands free speakingfacility Corded phone. (Detail specificationattached in Annexure -K).Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of 20 Pair PIJFcable 0.63MM armouredcable Make:Usha Martinor Similar. (Detailspecification attached inAnnexure -L). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of 50 Pair PIJFcable 0.63MM CopperConductor armouredcable Make:Usha Martinor Similar .(Detailspecification attached in Annexure -M). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of twisted pairPVC switch board cable,conductor of size 0.6mm.dia annealed copperconforming to IRS-TC-24/91 or ITD 1138 orlatest-10 pair. Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of twisted pairPVC switch board cable,conductor of size 0.6mm.dia annealed copperconforming to IRS-TC-24/91 or ITD 1138 orlatest-20 pair. Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Supply of 50 pairTelephone Cable 0.5mmCopper Conductor Make:Usha Martin or Similar.(Detail specificationattached in Annexure -N). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION
"Supply of Thermoshrinkjointing kit for 10/20/50pair Jelly filled cableconforming to RDSOSpec.No.RDSO/SPN/TC/57/2006 (Rev.0)(With latestamendment). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Jumper wireMake :Molex or Similar.(Detail specificationattached in Annexure -O). Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation of Jumperwire. The work is toexecuted as per theinstruction of RailwayEngineer.
"""Supply of DP Box 20Pair with Krone Modules . INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation of DP Box 20Pair. The work is toexecuted as per theinstruction of RailwayEngineer.
"Supply of krone Module10 Pair Make :Krone orSimilar. Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Installation of kroneModule. The work is toexecuted as per theinstruction of RailwayEngineer.
"Supply and installation of150+150 pair IPM DepthMDF with 03 number 100pair tag block with cabletermination. The work isto executed as per theinstruction of RailwayEngineer. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Excavation of trenches offollowing depth andwidth at the bottom ofthe trench includingclearing of roots bushesetc. for all types of soilsincluding morrum, hardsoil mixed with 92 bouldersetc. This work includeback filling the trench,ramming, consolidationof soil as well as disposalof extra soil after cable isplaced in the trench.After mansoon the routeis to be attended forback filling the rain cuts,wash out of soils whereever found.Depth 1.0Mtr. & Width 0.3Mtr. Thework is to executed asper the instruction ofRailway Engineer.
Laying of Quad Cable,PIJF cable of differentsizes, power cable ofdifferent size in theexcavated trench, insideGI,RCC and HDPE pipes.This includesloading/unloading &transportation 93 of cablesfrom the stores ofrailway as per theavailability.Wherever several cables ofdifferent categories haveto be laid in the sametrench/path, theprovision of seperation ofvarious cable should beas advised by the siteincharge of the Railway.Empty cable drums to bereturned by thecontractor.The cabledrums with unused cableat site to be returned bythe contracrtor from siteto Stores depot. Thework is to executed asper the instruction ofRailway Engineer.
"Supply and fixing of PVCcasing caping 25mm x25mm size for indoorwiring. This 94 includesdrawal of wires in thecasing caping andtermination of wire atend point. The work is toexecuted as per the instruction of RailwayEngineer. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Track crossing, RoadCrossing by pushingmethod (HDD method) atculverts/ track / 95 puccaroad crossing at a depthnot less than 1 meterwith reference to bottomof rail/road surfaceincluding supply ofGI/HDPE pipe .a) HDPEpipe/DWC pipe(4 inchdia). The work is toexecuted as per theinstruction of RailwayEngineer.
Transportation &Execution of followingkinds of joints on QuadCable using thermoshrinkjointing kit. This alsoincludes excavation ofcable joint pit of size1.2m x 1.2m x 1.0m inall types of soil forjointing of copper cables,back filling and rammingafter jointing.straightthrough joint on Quadcable/10-20-50 pairsPIJF Cable. The work isto executed as per theinstruction of RailwayEngineer.
Cement Concrete ofproportion 1:3:6 withgraded aggregate of size25mm. and below. Thework is to executed asper the instruction ofRailway Engineer.
"Supply, Installation, Testing & Commissioning of 3 KVA On Line UPS with isolation 98 transformer suitable for single phase AC input & single phase AC output, floor mounted type of maeAPC/Luminious/microtek/liebert/Numeric idicative bacup time120 minutes. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Chair(Revolving).Make:Godrej,Model:PCH-5001T orSimliar. Material (Set Of Two) INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply ofTable.Make:Godrej,Model:WT 718 + ERU orSimilar. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of 2 drawer fillingcabinet STVFXDM 2086or latest. Make: Godrejor Simliar. Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Steel Almirah (Model: Godrej Store Well/Slimline 4S) INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Wooden stoolheight 2 feet. Material INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Crimping toolMake Krone or Similar. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Hand OperatedEarth tester 4 terminaltype with completetesting kit, carrying caseand manufacturercalibration testcertificateNippen make orsimilar, Range : 0-10Ohms. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Hand OperatedInsulation tester withtest lead, carrying caseand manufacturercalibration testcertificate, Nippen makeor similar,Range : 100Volt , 100 M Ohms. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of DigitalMultimeter Make-Rishabhor similar. (Detailspecification attached inAnnexure -Q). INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of Portable digital auto range multi-meter clamp type Philips, Motwani, Fluke 108 or Rishabh make capable to measure from (0.1mv/0.01ma) AC/DC upto 50Amp(AC/DC), 600V(AC/DC) and 0.1 ohms- 40M ohms suitable for measurement of Freq., capacitance complete with Manual, leads, battery and holster etc. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
"Supply of ISI marked Carbon diOxide type (BC) fire extinguisher of 4.5 Kg capacity 109 confirming to IS:2878 from seamless cylinder confirming to IS: 7285 with IS marked control value conforming to IS: 3224 high pressure myr. Long discharge hose and horn complete with initial gas charged with carrying handle and wall mounting braket etc. as required by site Engineer. INSPECTION: CONSIGNEE FOR SUPPLY PORTION"
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACSGCC22-231to6.pdf
ATTACHMENT
GCC Correction slip 7 to 10
ATTACHMENT
GCC_April-2022_1.pdf
ATTACHMENT
Railnet-Exch-IPISAYC.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipno7-10.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
Download all tender documents and submit your bid