SPECIAL REPAIRS TO BLDG NO. P-01 (OTM) AT MG and G AREA SIG COY and SPECIAL REPAIRS TO ROOF OF 8TH FLOOR OF BLDG P-104, AGE B/R AND AGE E/M UNDER GE(WEST) COLABA, MUMBAI

Amount

Dismantling single layer Mangalore pattern roof tiles including ridge tiles complete all as specified and as directed by Engr-in-Charge.

Dismantling roof battens of any description, in any position complete all as specified and as directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof coverings including scaffolding at any height complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description, not otherwise provided for complete all as specified and as directed by Engr-in-Charge.

M&L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using smartcare RP or Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spary / brush applied, SmartCare Ultron liqiud membrane with an elongation of 600% and tensile strength of 1.2 N/mm2 as per ASTM D 2370, cracks bridging ability of 3mm as per ASTM C1305 , shore A hardness of min. 75 as per ASTM D 2240. The system includes final base preparation , epoxy primer applcation and applying smartcare Ultron or approved equivalent i n two coats at 1.5 kg per sqm etc, complete as per manufacturer specification over and including padding of cement concrete Type B1 1:2:4(20mm graded stone agg) 25mm thick concrete on RCC roof surafce and all other similar works complete all as specified and directed (SmartCare Ultron Hybrid polyurea).

Disconnectiing and dismantling of existing water storage tank of exceeding 2000 ltr capacity of any description shifting and refixing and reconnectiing to its originas position after completon of water proofing treatment of roof complete all as specified and directed.

Removal of complete roof treatment including plastering/concreting/bricks bat surface complete all as specified and directed and removing the debris outside MD land

M&L for 25mm thick cement concrete Type B0(1:2:4) using 12.5 mm graded stone aggregate mixed with WPC @ 2% by wt. of cement as in padding to RCC roof for receiving roof treatment and all other similar works complete all as specified and directed.(WPC will be measured and paid separately.)

M & L in repair to replace old decayed timber ( including piecing, scarifying, etc of old and new timber if required) second class hard wood, clean sawn, in scantlings, timber framed and fixed, in any position and description including scaffoldings of any height complete all as specified and as directed by Engr-in-Charge.

S & F in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc, 20 mm thick second class hardwood, clean sawn boarding, fixed with nails with butt joints, in any situation including scaffoldings of any height complete all as specified and as directed by Engr-in-Charge.

Fixing only in repairs in patches including cutting out old, piecing,heading joints etc, 20 mm thick second class hardwood, clean sawn boarding, fixed with nails with butt joints, in any situation, including scaffoldings of any height complete all as specified and as directed by Engr-in-Charge.

M & L pre-painted roof metal sheet of Mangalore tile design profile, hot-dip aluminium-zinc alloy metallic coated profile steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick of a colour as approved by GE, having yield strength of 550 Mpa as in roof covering/Cladding to wall fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed by Engr-in-Charge. Make- (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (vi) ASSOCIATED PROFILES AND ALUMINIUM LT

S & F pre-painted galvalume aluminium zinc coating GI based plain, steel sheet 0.50mm thick (total thickness including coating) of any colour having tensile strength of 550 MPA as in cladding to wall, roof covering etc, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge. Make- (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (vi) ASSOCIATED PROFILES AND ALUMINIUM LT

S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. not exceeding 10 kg each brackets conforming to Fe 290 omplete all as specified and as directed by Engr-in-Charge.

S & F rolled mild steel sections as in joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as in strengthening of staircase and existing structuresand all similar works complete all as specified and conforming to Fe - 410 W (Grade E-250) quality 'A' including riveting / or welding and fixing with screws, bolts etc. complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings, n.exc. 15cm thickness (below or above ground level) and removal of debris outside MD land complete all as specified and as directed by Engr-in-Charge

Demolition of brick work/stone/PCC block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engr-in-Charge.

M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius with old size bricks, built in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge

M & L for 75mm thick PCC 1:3:6 type C2, using 40mm graded stone aggregate as in plinth protection & finishing the surface finished even and fair without using extra cement complete all as specified and directed by Engineer in charge.

M & L for 100mm thick PCC, 1:3:6, type C2, using 40mm graded stone aggregate as in floor & finishing the surface finished even and fair without using extra cement complete all as specified and directed by Engineer in charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, & brushing neat cement slurry with 3.0 kg of cement per sq mtr etc. complete all as specified and directed by Engineer in charge.

M & L for light shade vitrified tiles, 8 to 10mm thick, (square/ rectangular) polished, area of each tiles not exc exceeding 0.36 Sqm , in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somani Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L for light shade vitrified tiles, 8 to 10mm thick, (square/ rectangular) polished, area of each tiles not exc exceeding 0.36 Sqm , on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including backing coat 10 mm in CM (1:4) complete all as specified and as directed by Engr-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L glazed tiles digital coloured ceramic tiles 300x450x7mm thick on vertical surfaces (including designed borders) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match and rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Note:- (Rate of Designer border on vertical surface will be deemed into quoted rates) Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L for Coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match,including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer in charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L for machine cut Kota (greenish colour, pre polished) stone slab flooring, 20-25 mm thick, in one piece as in cill/staircase treads etc, over cement screed bed 20 mm in CM (1:3) base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer in Charge.

M & L for machine cut Kota (greenish colour, pre polished) stone slab flooring, 20-25 mm thick as in floor, over cement screed bed 15 mm in CM (1:6) base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer in Charge.

M & L for machine cut cuddapa stone slabs 20-25 mm thick as in floor, over & including 15 mm thick screed bed in cement mortar (1:6) and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and as directed by the Engineer-in-Charge.

M & L for machine cut Kota (greenish colour, pre polished) stone slab flooring, 18-20 mm thick, in one piece as in vertical surfaces, skirting etc, set and jointed in neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and pointed in colour cement to match including backing coat 10 mm in CM (1:3) complete all as specified and as directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness laid in floors, aprons etc, laid, bedded and pointed in any mortar and and removing the rubbish outside MD land complete all as specified and as directed.

M & L for Granite tiles (of any type and colour) , 20mm thick machine cut, set, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including screed bed in cement plaster 20 mm thick 1:4, as in kitchen platform, jamb/cill of window, ventilator, border, flooring and simillar work etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wall/ ceiling boards(fibre, pulp, insulation etc.) or insulations boards /slabs/blankets any thickness including cover fillets of any description including all snap grids and hanging arrangements complete all as specified and as directed by Engineer-in-Charge.

M & L for GI powder coated frame work for seamless ceiling, 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm, fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm, suspended from soffit, at approx 900mm centre to centre with GI cleat and steel expansion fasteners, with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm, fixed to the intermediate channel with connecting clips, across the intermediate channel at 457mm centre to centre complete all as specified and as directed by Engineer-in-Charge.

M & L for 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids . Note:- Frame work for ceiling shall be measured and paid separately.) Make- RAMCO/Deckelite India/Supra/Hilux

Taking down cement plaster on brick or stone/concrete surfaces, etc. on internal/external surface of wall/ceiling including raking out joints, hacking for key, scrubbing down with water to receive plaster and removing debris out side MD land complete all as specified and as directed by Engr-in-Charge.

Chipping removing carefully concrete work by low impact hammer, breaker without damaging the structure & cleaning and disposal of debris outside the premises etc. complete all as specified and directed by Engr-in-Charge. Hard concrete should not be removed by froce.

M & L for repair to spalling of cncrete by applying bond coat of epoxy bonding agent & cement in ration 1:1 for bonding old and new concrete on damage surfaces and applying polymer modified mortar in CM (1:3) having 20mm Avg thickness Note:- (a) Supply only polymer mortar additive will be measured and paid separately. Repair to be done by authorisied applicator of Dr fixit/Build Core/Fosroc/Pedilite as approved by GE . (i) Qty of polymer shall be 15% by wt of cement. (ii) pan mixer shall be used to get hmogenous dough on bond coat surface . (iii) required thickness shall be achieved by repeating this step after 24 hrs to as required. (iv) Repaired surface area shall be kept moist for 5-7 days.

M&L for repair to damaged surface of RCC elements like beams, columns, wall by removing all loose cement plaster/concrete, providing and laying of micro-concrete at least upto 20mm thickness (Avg) by using the recommended water powder ratio mix the micro-concrete with pan mixer as per manufacturer's instructions including appling jacketing watertight shuttering necessary curing for 7 days complete all as specified and directed by Engr-in-Charge. Note:- Mircro concrete will be measured and paid separately, through authorised applicator of Dr fixit/Build Core/Fosroc/Pedilite as approved by GE.

Replacement of steel reinforcement with TMT bars of appropriate sixe where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coaring IPNET-RB complete all as specified and directed.

Supply only polymer mortar additive for repair to spalling. Make :- Dr fixit Pidicrete URP / Build Core / Fosroc/Pedilite.

Supply only micro-concrete for repair or build core. Make :- Dr fixit / Build Core / Fosroc/Pedilite/ / Piditilite Micro-concrete (molith-MC) M-30 or equivalent.

M&L for preparation of surface cracks of plaster internal / external of walls , ceiling / chajjas upto 5mm wide , remove the loose plaster/ concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat including necessary scafolding uopto 8th storey complete allc as specified and directed. Make:- Use of dr fixit crack 'X' shrinkfree paste compound / SmartCare Texture Crack Filler / Build Core Compound / Fosroc Compound / as approved by GE through their authorised applicator.

M&L for preparation of surface by cutting 'V' groove cracks of plaster internal / external of wall, ceiling / chajjas all along the crack 5mm to 10mm and remove the loose plaster / concrete by suitable tools, filing cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any height complete all as specified and directed. Make :- Use of dr fixit crack 'X' shrinkfree paste compound / SmartCare Texture Crack Filler / Build Core Compound / Fosroc Compound / as approved by GE through their authorised applicator.

M & L for rendering 15mm thick in CM 1:6 on fair faces of brick wall or concrete surface & finishing even and smooth without using extra cement complete all as specified and directed by Engineer- in-charge.

M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with integral water proofing compound & finished even and fair complete all as specified and directed by Engineer- in-charge. Note: - Water proofing compound will be measured and paid for separately as "supply only"

Supply only liquid water proofing compound. Make - Plastocrete of Sika/Pidiproof LW of Pidilite.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a 1mm thick (average) wall care putty complete all as specified and directed by Engineer in Charge. Make: SHALIMAR / BERGER / NEROLAC / ICI LTD/ASIAN (Tractor Brand)

Fixing only in repairs in patches including cutting out old, piecing,heading joints etc, 20 mm thick second class hardwood, clean sawn boarding, fixed with nails with butt joints, in any situation, including scaffoldings of any height complete all as specified and directed.

M & L for preparing of new plastered surfaces of wall/ceiling by scrapping/rubbing and applying two coats of Acrylic weather proof exterior paint (100% acrylic) over a coat of acrylic primer complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make- (a) Asian Paint - Apex Ultima Protek. (b) Berger Paint - Weather coat smooth. (c) Nitco Paint - Outshine premium 100% acrylic exterior (d) ICI Dulux - Weather shield exterior.

M & L for preparing of old plastered surfaces of wall/ceiling by scrapping/rubbing and applying two coats of Acrylic weather proof exterior paint over a coat of acrylic primer complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make- (a) Asian Paint - Apex Ultima Protek. (b) Berger Paint - Weather coat smooth. (c) Nitco Paint - Outshine premium 100% acrylic exterior (d) ICI Dulux - Weather shield exterior.

M & L for preparing old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

M & L for preparing new wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

Taking down chowkats or frame with shutters exc 1.5 sqm n exc 4.00 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engr-in-Charge

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each including fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engr-in-Charge

S & F plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good frame in cement concrete complete all as specified and as directed by Engineer-in-Charge.

M & L for preparing surfaces of wood and wood based materials, steel and iron work, treating ends of posts, hold fasts, backs of chowkats, etc., area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and as directed by Engr-in-Charge.

M & L for preparing surfaces of wood and wood based materials, steel and iron work, treating ends of posts, hold fasts, backs of chowkats, etc., area tarred, not exceeding 0.1 sqm each and treated with tar or coal tar black paint complete all as specified and as directed by Engr-in-Charge.

S & F 35mm thick factory made plain framed panelled shutter of 2nd class hardwood rail and style (any panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.

S & F 35mm thick factory made of 2nd class hard wood, glazed and skelton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part-I section 8, clasue No 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge.

S & F 35mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and as directed by Engr-in-Charge.

S & F mild steel 300 mm size, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed by Engr-in-Charge.

S & F aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy , 300mm long, ISI marked complete all as specified and as directed by Engr-in-Charge.Make : Classic/ Shalimar/ CLIF/ARGET

Taking down shutters of any description n.exc 1 sqm each including fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engr-in-Charge

S & F Second class hard wood, kiln seasoned, chemically treated, factory made glazed and skeleton window shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc,bdivided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge.

S & F stainless steel butt hinges, heavy duty of 75mm size complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F aluminium anodised barrel tower bolt of extruded section of size 100mm complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F aluminium handles, cast type, anodised of size 75mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F 3mm thick sheet glass, plain, ordinary quality,in square or rectangles, not exc. 0.5 Sqm in each pane, glazing with oil putty complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

M & L in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture, 1.40mm and fixed with aluminium wire staples or wooden/rubber beads/fillets with painting complete all as specified and as directed by Engr-in-charge.

S & F Aluminium plate, Type 2, gate and shutter, hooks and eyes, 150 mm nominal size complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET

S & F aluminium anodised barrel tower bolt of extruded section of size 200mm complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F aluminium handles, cast type, anodised of size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F stainless steel butt hinges, heavy duty of 100mm size complete all as specified and as directed by Engr-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

S & F in repairs vitreous china wash hand basin with Pedestal, white, flat back of size 580 mm x 450 mm including 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, waste chain and plug and porcelain stopper including brackets,chromium plated waste coupling, waste fittings 32mm bore of brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed. Make:Neycer Kermag (Standard)/Hindustan Sanitary Ware Industries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)/Jaquar

S &F in repair vitreous china bowl urinal, flat back, size 465 x 355x 265 mm white (minimum), with grating and urinal for discharge pipe, waste pipe complete including providing and fixing plugs, bedding urinal against wall in CM securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement mortar 1:2 , fixing cistern with brackets, flush pipe, grating and union for discharge pipe (excluding fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engr-in-Charge.Make:Neycer Kermag (Standard)/Hindustan Sanitary WareIndustries (Ist Quality)/Parryware (Super Fine)/Cera(Ist Quality)

S & F in repairs urinals spreader of PTMT of any colour for fixing with 15 mm dia pipe (minimum wt 60 gms) fixed in position complete all as specified and as directed. Make- (i)Jaypee (ii) GMP (iii) Neta (iv) Zolota (v) Prayag polimer (vi) Symet

S & F in repairs PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-Charge

S & F brass chromium plated towel rail with bracket, 61cm long along with all hooks, screws and fitting required complete all as specified and as directed by Engr-in-Charge Make ESS ESS CROMA cat Part no C423 or equivalent in Jaquar/Parko

S & F in repairs chromium plated soap dish as per Jaquar Model No. AQN-CHR-7733 or equivalent of hindware complete all as specified and as directed by Engr-in-Charge

S & F in repairs PTMT grating square of size 150mm (minimum weight 100gms) complete all as specified and as directed by Engr-in-Charge. Make : Prince/Finolex/Supreme/HIL Limited (Birla Aircon)

S & F in repair 15mm nominal size, fancy type angular valve cast copper alloy screwed down, high pressuer with crutch or butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and as directed by Engr-in-Charge. Make ESS ESS CROMA cat Part no C204 or equivalent in Jaquar/Parko

S & F in repairs 15mm bore stop valves (concealed type), cast copper alloy, chromium plated , screwed down, high pressure, with crutch of butterfly handle, screwed down both ends for iron pipe or for unions, conforming to IS complete all as specified and as directed by Engr-in-Charge. Make:Jaguar/Sona/Leader/Zoloto/Sieco/Prima/Prayag

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

Refixing old steel tubing and connections in new or old positions (Walls, Ceiling, floors, etc) of bore 15 mm complete all as specified and directed by Engr-in-Charge.

S & F steel water tubing of size 15mm bore, medium grade, galvanised iron with all Fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239, fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engr-in-Charge. Make- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

Refixing old steel tubing and connections in new or old positions (Walls, Ceiling, floors, etc) of bore 20 mm complete all as specified and directed by Engr-in-Charge.

S & F steel water tubing of size 20mm bore, medium grade, galvanised iron with all Fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239, fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engr-in-Charge. Make- (a) Tata (b) Swastik (c) Jindal (d) Surya (e) Prakash (f) Indian Tube Company (g) Zenith (h) BST (j) GST (Gujrat Steel Tube)

Cutting chases for ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., pinning in, making good to facings in brick walls where required and pointing in cement mortar 1:3 and making good, cutting not exceeding 10 cm girth complete all as specified and as directed by Engr-in-Charge.

S & F in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-Charge.Make- Prince/Finolex/Supreme/Kisan/HIL Limited (Birla Aircon)

M & L for PVC (SWR ) gully trap 125/110 mm with grating or without grating and jointing with solvent cement and fixed in position complete all as specified and directed including cement concrete type B1. 1:2:4, using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed.Make- Prince/Finolex/Supreme/Kisan/HIL Limited (Birla Aircon)

S & F in repairs PVC (SWR), type B, single socketed, rain water/soil waste/vent pipes with rubber ring joints, 75mm dia, laid in trenches or fixed to walls, upto any height and including necessary scaffolding complete all as specified and as directed by Engr-in-Charge. Make- Prince/Finolex/Supreme/Kisan/HIL Limited (Birla Aircon)

S & F in repairs 75mm dia bore PVC (SWR) bends, any radius, with oval access door complete all as specified and as directed by Engr-in-Charge. Make- Prince/Finolex/Supreme/Kisan/HIL Limited (Birla Aircon)

S & F PVC (SWR) vent cowl, 75 mm bore complete all as specified and as directed by Engr-in-Charge. Make- Prince/Finolex/Supreme/Kisan/HIL Limited (Birla Aircon)

M & L for Submain wiring complete with and including 4 runs of 10 sqmm single core FRLSH PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade and 10 sqmm green colour FRLSH PVC multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly for housing the wires for one SPN DB, drawn through and including PVC conduit of dia 32mm , heavy duty including accessories, fixed on walls including taking down existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB Make for cable :(i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel(x) KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Presfit (iv) Precision (v) Astral Note : 4 runs of 10 sqmm PVC insulated cable and one run of 10 sqmm cable and one run of PVC conduit shall be measured as one unit length.

M & L for Submain wiring complete with and including 2 runs of 6 sqmm single core FRLSH PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade and 6 sqmm green colour FRLSH PVC multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly for housing the wires for one SPN DB, drawn through and including PVC conduit of dia 25mm , heavy duty including accessories, fixed on walls including taking down existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB Make for cable :(i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel(x) KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Presfit (iv) Precision (v) Astral Note : 2 runs of 6 sqmm PVC insulated cable and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one unit length.

M & L for Submain wiring complete with and including 2 runs of 4 sqmm single core FRLSH PVC insulated and unsheathed multistranded copper conductor cable single core 1100 Volts grade and 4 sqmm green colour FRLSH PVC multistranded copper conductor cable as earth continuity conductor and connected to common earth dolly for housing the wires for one SPN DB, drawn through and including PVC conduit of dia 25mm , heavy duty including accessories, fixed on walls including taking down existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB Make for cable :(i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel(x) KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Presfit (iv) Precision (v) Astral Note : 2 runs of 4 sqmm PVC insulated cable and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one unit length.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work after credit for the same is recovered by the dept and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

M & L for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 25mm mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories with concealed 1.2 mm thick pressed steel sunken box and with including modular cover plate and frame, suitable for fixing modular switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point controlled by one modular switch, 1 way 6/10 amps, 1 module complete all as specified and directed by Engineer-in- Charge Make of Cable : (i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel(x) KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Presfit (iv) Precision (v) Astral

All as per serial no.91 here-in but for One ceiling fan controlled by one switch.

All as per serial no.91 here-in but for One exhaust/wall mounting fan controlled by one switch.

All as per serial no.91 here-in but for One 3 pin socket point 5 Amps on independent board

All as per serial no.91 here-in but for One 3 pin socket point 5 Amps on same board

M & L for Point wiring with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor conforming to IS-694, in and including PVC casing caping, medium grade (ISI mark) of size 20mm / 25mm with all fittings and accessories with 16 SWG mild steel sunken box for housing of switch, socket, regulator etc, concealed in wall, flush with wall with 3 mm thick PVC laminated top cover and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point controlled by one switch complete all as specified and directed by Engineer-in- Charge Make for cable :Havells/Finolex/ Nicco/Plaza/ Anchor/Polycab/RPG/GLOSTER/RR Kabel/KEI Make for Casing & Capping : Precision/ Modi/Presto Plast/ Supreme/ Polycab/ Plaza/Pressfit

All as per serial no.96 here-in but for One ceiling fan controlled by one switch.

All as per serial no.96 here-in but for One 3 pin socket point 5 Amps on independent board

All as per serial no.96 here-in but for One 3 pin socket point 5 Amps on same board

M & L for Point wiring (concealed type) with 2.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 25mm mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories with concealed 1.2 mm thick pressed steel sunken box and with including modular cover plate and frame, suitable for fixing modular switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point controlled by one modular switch, 1 way 6/10 amps, 1 module complete all as specified and directed by Engineer-in- Charge Make of Cable :(i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel(x) KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Presfit (iv) Precision (v) Astral

S & F Switch piano, flush type, single pole, one way 10 Amp complete all as specified and directed by Engineer-in- Charge Make : (i) Anchor (ii) Crabtree (iii) Leader (iv) Legrand (v) Havells (vi) C & S Electric Ltd (vii) SSK

S & F Socket 2/3 Pin, 5A Make : Anchor, Havells, SSK

S & F Switch Socket combination, flush type, 2/3 pin, 5 Amps, singel pole, one way complete all as specified and directed by Engineer-in- Charge Make : (i) Anchor (ii) Crabtree (iii) Leader (iv) Legrand (v) Havells (vi) C & S Electric Ltd (vii) SSK

S & F Switch Socket combination, flush type, 2/3 pin, 5/16 Amps, singel pole, one way complete all as specified and directed by Engineer-in- Charge Make : (i) Anchor (ii) Crabtree (iii) Leader (iv) Legrand (v) Havells (vi) C & S Electric Ltd (vii) SSK

S & F stepped type electronic fan regulator 450 watt, flush type on the existing phenolic laminated sheet etc.complete all as specified and directed by Engineer-in- Charge Make : (i) Anchor (ii) Crabtree (iii) Leader (iv) Legrand (v) Havells (vi) C & S Electric Ltd (vii) SSK

S & F ceiling rose, surface bakelite 65 x 50 mm, two to three terminals complete all as specified and as directed. Make : (i) Anchor (ii) Crabtree (iii) Leader (iv) Legrand (v) Havells (vi) C & S Electric Ltd (vii) SSK

S & F in repair 20 watt LED, 4 feet long, fixed on & including PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076 PVC insulated, multi strandard, copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make:Havells cat pt no LHEXBXPNIN1W020 or equivalent model in Wipro model no - Wipro Garnet 20 W LED Batten 6500K / Philips model No - BN150W LED 20S-6500 PSE ODGR / OSRAM.

S & F in repairs LED building security light, 45 Watt, 2500 lumens luminaire fixture in IP 65/66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours and including suitable bracket made out of GI pipe 25mm/40 mm bore light grade (as per fitting bas dia) of approximate length 2mtr long bent to shape and fixed to wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc., including connecting up with 2 core 1.5 sqmm PVC insulated PVC sheathed weather proof multi stranded aluminium conductor cable 1100 volts grade upto junction box including painting of clamps with two coats of aluminium paint over a coat of approved primer all as specified and as directed. Make:-Havells, cat part No. ENDURACITYLINERNEX GENSL45W LED 757SASYBOPC or equivalent make of Philips Car Part No BRP409LED 065CWHEMRFG SI PSU GR / Wipro Cat Part No LR 02-501-XXX-57-XX

S & F in repairs LED 36 Watt fitting, hanging fitting and connecting with three single core 23/0.0076 PVC insulated, multi strandard, copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make - Havells Cat part No - DESTELLODILP36WLED 840SPMMAWH ) or equivalent model of Wipro / Philips/Bajaj/CG

S & F in repairs PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor, FR of size 2.5 Sqmm, 3 core in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 20mm mm dia, with saddle complete all as specified and directed by Engineer-in- Charge Note: Mode of measurement 2.5 Sqmm 3 core cable with PVC conduit shall be measured as one length. Make of Cable :(i) Havells (ii) Finolex (iii) Nicco (iv) Plaza (v) Anchor (vi) Polycab (vii) RPG (viii) GLOSTER (ix) RR Kabel(x) KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Presfit (iv) Precision (v) Astral

S & F in repairs single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp with one single pole, MCB complete all as specified and directed by Engineer-in- Charge Make: (i) Larsen & Toubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard

S & F in repairs DB vertical type 4 way TPN , double door load line powder coated complete alongwith 200 Amp rated Bus bar with 160 Amps MCCB, adjustable type, 4 Pole, 415 V with breaking capacity 36 KA, fixed on wall, duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed by Engineer-in- Charge Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB complete all as directed. Make: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard Make of MCCB: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard

S & F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used, 240 volts, 8 way with 200 Amps rated bus bar,single pole and neutral, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/ thimbles duly crimped for connection complete all as specified and directed by Engineer-in- Charge Make: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard

S & F in repairs sheet metal enclosures, double door, for DBs when MCBs to be used, 240 volts, 12 way with 200 Amps rated bus bar,single pole and neutral, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/ thimbles duly crimped for connection complete all as specified and directed by Engineer-in- Charge Make: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard

S & F in repairs MCB SP, 6 amps to 32 amps, 240 volts,10 KA, C series complete all as specified and as directed by Engineer-in-Charge. Make: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard

S & F in repairs MCB SPN, 40 to 63 amps, 240 volts,10 KA, C series complete all as specified and as directed by Engineer-in-Charge. Make: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard

M & L in repairs for earthing complete with galvanized steel plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 deep below ground level with top edge of the plate not less than 1.50 m below ground level connected to GI strip of size 25mm X 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 40 mm GI tubing medium grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt PCC (1:2:3) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe med grade for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Par tI (2009) and connected to earth test incl testing complete all as specified and directed. Note :- (i) GI watering pipe of 20 mm bore light grade and earth lead protection pipe upto 7.5 Mtr shall be included in item quoted rate.

Garima Construction Co

Nilesh Construction

Vandan Enterprises

AGRAWAL ASSOCIATES

Frends Enterprises