Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹6.2 LAccepted-AOC AT KUCHANA BASTI POST KUCHANA TAHSIL BHADRAWATI DISTRICT CHANDRAPUR MS 442503 | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | 442503 | L-1 | Accepted-AOC Work awarded | |
| 2 | L-2₹6.2 L+₹4,386.37 (0.71%)Rejected-Finance AT KUCHANA POST KUCHANA TAH BHADRAWATI DISTRICT CHANDRAPUR | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442503 | L-2 | Rejected-Finance Due to L-2 bidder. | |
| 3 | L-3₹6.5 L+₹33,562.68 (5.44%)Rejected-Finance AT KUCHANA POST KUCHANA TAH BHADRAWATI DISTRICT CHANDRAPUR MAHARASHTRA | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442503 | L-3 | Rejected-Finance Due to L-3 bidder. | |
| 4 | L-4₹6.9 L+₹74,251.32 (12.0%)Rejected-Finance CAMP NEW MAJRI COLLIERY PO SHIVAJINAGAR TEHSIL BHADRAWATI DISTRICT CHANDRAPUR MS | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442503 | L-4 | Rejected-Finance Due to L-4 bidder. | |
| 5 | L-5₹6.9 L+₹75,717.59 (12.3%)Rejected-Finance 111 SAPNA CHAMBER SHRIMAYA CELIBRATION MADHUMILAN CHOURAHA INDORE | INDORE | INDORE | MADHYA PRADESH | L-5 | Rejected-Finance Due to L-5 bidder. |
Tender Value
₹7.7 L
EMD Value
₹9,700
Closing Date
28 Oct 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil), WCL, Majri Area.
At/Post Kuchana, Tahsil Bhadrawati, District Chandrapur (MS) 442503.
Repair and maintenance of VTC Building under Area Unit of Majri Area.
2022_WCL_259516_2
ma4450-civ-e044-2022-23/427 Dated 17.10.2022
Open Tender
Civil Works - Others
Item Rate
28 days
New Majri Colliery
Please refer Tender documents.
4 documents required · 4 mandatory
₹9,700
27 Nov 2022
17 Oct 2022
29 Oct 2022
18 Oct 2022
28 Oct 2022
18 Oct 2022
18 Oct 2022 - 25 Oct 2022
Amount
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
Cleaning of roof salb, chajjas including removing the garbage and cleaning of all the spot pipes etc. complete as per instruction of the Engineer-in-charge.
Supplying of water proofing compound of approved manufacture etc. complete as per instruction of Engineer-in-charge.
Floor / roof painting with damp proof paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work
painting,writing on boards with two coat base paint of approved quality enamel paint and painting and writing in english/hindi in required shade including the cost of all materials,labour etc. complete as per instruction of engg-in-charge
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with sea ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 50 mm diameter
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Superstructure and : Cement morter 1:6 (1 cement : 6 coarse sand)
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately).
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)
Total impact of GST for the purpose of CTC
AJIT KUMAR YADAV
Md. Aslam Beg
GEETA SINGH
SINGH CONSTRUCTION
stage.html
html • 0.05 MB
techsummary_268370.pdf
PDF • 0.07 MB
finsummary_268370.pdf
PDF • 0.11 MB
AOC-1203.pdf
PDF • 1.87 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .