SPECIAL REPAIR TO BLDG NO 7A AND 7B TRANSIT COMPLEX AT 7 PARADE ROAD UNDER GE EAST DELHI CANTT-10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed

Taking down cement or lime plaster any description on brick or stone walls,ceilings etc including recking out joints hacking for key scrubbing down with waters and removal of rubbish from the premises as directed.

Taking down chowkat or frames exc. 1.5 sqm and n. exc 4.00 sqm each with shutters (without taking off shutters from frames).

Taking down chowkat or frames n. exc. 1.5 sqm each with shutters (without taking off shutters from frames).

Taking up or down steel tubing and connections 15mm dia including cleaning for refixing and removal to store compete all as specified.

Taking up or down steel tubing and connections 20mm dia including cleaning for refixing and removal to store.

Complete removal of existing treatment of walls surfaces and preparation of old plaster surfaces of wall and applying 1 mm thick wall care putty to get the surface even and smooth for applying required wall finishes under seaparate item complete all as specified and as directed.

All as per item No. 7 above but on ceiling surfaces.

M&L for rendering 15mm thick with water proofing compound in cement mortar 1:4 on fare faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified.

M&L for rendering 5mm thick with water proofing compound in cement mortar 1:3 on fare faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement in ceiling complete all as specified.

Supply only liquid water proofing compound and to mixed as per manufacturer instruction complete all as specified.

Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L for preparation of new plaster surfaces of wall and applying 1 mm thick wall care putty to get the surface even and smooth for applying required wall finishes under separate itemcomplete all as specified and as directed.

All as per item No.13 above but on ceiling surfaces.

M&L for preparation of new plastered surface of wall and applying two coat of plastic emulsion paint over a coat of priming coat complete all as specified and as directed.

All as per item No.15 above but on ceiling surfaces.

Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth and n.exc 10 Sqm on plan and getting out in any type of soil complete all as specified and directed.

Returning filling including spreading levelling watering and well ramming in layers n.exc 25cm in soil.

Removing excavated material to distance n.exc 50M deposited where directed at a level n.exc. 1.5M above starting point.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar1:3 in brick or stone wall , cutting not exc 10cm girth complete.

M&L for granite (of any type) work ( table rubbed and polished ) in steps, jambs,pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S& F Vitrified coloured ceramic tiles 10mm thick dark shade double charged exc 0.40 sqm but n.exc 0.96 sqm each, rectangular, polished as in floors etc, laid over and including 20 mm thick cement screed in cm 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S & F joint free non skid ceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 15mm thick screed bed in CM (1:6) complete.

S&F for Glazed ceramic coloured tiles in vertical surface 600x300x7 - 10mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10mm thick backing coat in cm 1:4 complete.

Supply and fixing steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

M& L for cement concrete 25mm thick type B-0 using 12.5mm graded stone aggregate over sub base to receive floor finish or as in levelling course etc complete all as specified.

Supply and fixing steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling all as specified and as directed.

S&F Vitreous china wash down water closet pan wall hung WC, Make Jaquar Model No: FLS - IVY- 5951 with PP seat cover, hinges, accessories set, size 360x545x365 full set or other equivelent make from list, including flushing cistern and fixed with brass screw complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C - 2, using 40mm graded stone aggregate as in plinth protection and other similar work finishing the surface even and smooth with using extra cement.

Forming Grade 'A' Contraction ( Dummy) joints 50mm deep x 10mm wide filled with sealing compound

S&F vitreous china wash basin under counter ovel type size 600x425x195mm, Make Jaquar Model No- CNS-WHT- WB 03 or eqvilent make from list, fixed under granite slab with all fitting and fixture complete all as specified.

S&F in repairs fancy type central hole mixer ( basin mixer)single liver mixter with popup waste and 450 mm long braided hoses, cast copper alloy with chromium plated screwed down high pressure screwed for iron pipe,15mm bore complete all as spd. (Make Jaquare cat No. KUP-35051BPM or equivalent make from the list) .

S&F in repairs concealed stop cock, cast copper alloy with crutch or butter fly handle fancy type chromium plated , (concealed type) screwed for iron pipes 15mm bore complete all as spd. Make - Jaguar ALD-083, ALD-089 & ALD-081or equivalent make from the list)

Supply and fix in repairs cast copper alloy chromium plated angle cock, of 15 mm bore complete all as specified and directed. ( Make - Jaquar ORP-10053PM or equivalent make from the list)

S&F Towel Rail 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats . ( make - jaquar .ACN-1111BNM or equivalent make from the list)

S&F Towel Rack 600mm long with lower hanger of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats. (Make- Jaquare ACN-1181S or equivalent make from the list) .

S&F in repairs Chromium Plated grating doom 125 mm dia ring type with or without waste hole complete.

Supply and fix in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.

S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall flange with hand and overhand shower with all fittings and fixtures, flexible tube 8mm dia and 1.50m long with nuts,hand shower 105mm dia round shape single flow with air effective (ABS body and Face plate chromium plated) with rubit cleaning system complete all as specified. (Make Jaquare, Cat Part No : FUS- 2928, OHS-35495, SHA- 549D8, HSH 1775 & Cat No. SHA- 455L400 respectively or equivalent make from the list

Supply and fix in repairs for PVC waste pipe with 32 mm bore and 85 cm long complete all as specified and directed.

S&F looking mirror fancy type size 900x1200mm mounted on 6mm thick PVC sheet and aluminium frame / modular teak wood finish beading all around incl fix with necessary fixing arrangement complete.

S&F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connnecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx160mm with all fitting and fixture complete all as specified and directed fixed.

S&F in repairs cast copper alloy CP toilet paper holder fixed with plug and brass screw completed all as specified .(Make- Jaquare Cat No- AAHS-1551 or equivalent make from the list.

S&F corner glass self with CP bracket. ( Make : jaquare Cat Part No : ACN - 1173 or equivalent make from the list)

S&F in repairs flushing jet of approved make for pedestal pattern water closet including flexible pipe fixed complete to EWC any type complete all as spd.

S&F in repairs health faucet chromium plated brass completed all as spd Make - Jaguar cat No-ALD573 or equivalent make from the list

S&F 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F bib taps,15mm bore cast copper alloy make jaquar , screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs. Make - Jaguar cat No-KUB- 35037F or equivalent make from the list

S&F in repairs fancy type single lever sink mixer with 210mm extension body swinging spout without popup waste ( table mounted)with 600 mm long braided house screwed for iron pipe,15mm bore complete all as spd. (Make Jaquare Cat No.LYR-38173B or equivalent make from the list

Taking down rain water / vent pipe of any description including fittings etc including removal to store, complete all as specified and directed.

Supply and fixing 110mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls etc complete all specified and directed.

Supply and fixing SWR Junction single ,(single T) equal or un equal provided with access door 100/110mm complete all specified.

Supply and fixing SWR bends (any radius) 110mm complete all specified.

Supply and fixing 110mm bore SWR pipes single socketed in any length with rubber ring joints laid in trenches or in floor etc complete all specified and directed.

Supply and fixing 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15 Cm thickness below or above ground level complete all as specified and as directed.

S&F PVC ( SWR ) 75mm bore pipes single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F PVC ( SWR ) 75mm bore pipes single socketed in any length with rubber ring joints, fixed to walls

Supply and fixing SWR bends (any radius) 75mm bore, complete all specified.

M & L RCC(1:2:4) type B-1 using 20 mm graded stone aggregatec as in shelves and similar work etc complete including form work all as specified and directed

Demolition of brick work built in cement mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks in cm 1:6 stright or curved on plan exc 6m mean radius complete all as specified and as directed.

Cutting openning through brick wall built in CM for door window and other openning including removing the rubbish not exc. 50M complete all as specified.

S&F curtain rod/ rail with stainless steel rod fancy type 25 mm dia including bracket and fancy type lattoo, etc complete all as specified and directed.Make :- Vista

S&F stainless steel universal door assembly for each glass door including top and bottom pivot, floor machine,suitable floor door spring for smooth operation including all necessary fittings and fixers for fixing of door complete all as specified and as directed. Make - Ozone or equivalent from the list.

S&F 250mm long stainless steel door handle fixed to glass door complete all as specified and as directed.

S&F Elastic PVC beading for sliding glass doors complete all as specified and directed.

S&F stainless steel brackets for fixing of toughned glass to walls, floor as required complete all as required.

Dismantling existing water tanks of capacity exc 500 & n.exc 1000 ltrs lowering from its position and removal to store.

S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Demolation and breaking up 150mm dia drain pipes ( salt glazed ware, AC or reinforced Concrete ) set in cement mortar complete all as specified.

M&L for concrete bed to drain pipes in PCC 1:4:8 type D - 2 using 40mm grade stone aggregate to drain pipes including forming cradels for 150 mm dia bore pipe complete allas specified and directed.

S & F 150 mm dia HDPE double wall corrugated pipe with couplers conforming to IS 16098 laid in trenches and jointed as per manufacturer procedure compete all as specified and directed.

Material and labour providing precast Reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in manhole cover slabs including necessary form work etc.,complete. Note :- reinforcement shall be measured and paid separately.

M & L for cement concrete type B - 1, 1:2:4 (using 20 mm graded stone aggregate as in coping, apex stone, bed plate or in blocks for fixing of hold fast etc including wethering slightly rounded or chamfered angles and necessary form work com-plete all as specified and as directed.

M&L for providing and fixing factory made UPVC white colour siliding window three trck made xtruded profiles with all thickness of 2.3mm, having profile with hollow section with multi chamber. Frame size (60mm x 62mm), sash (42mmx67mm), sliding inter lock (one vertical length in each shutters) (45.5mmx28mm),glazing head (24.50mmx 16), mitered cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water etc. including EPDM gaskets 1.2, thick glavanised steel frame (30mmx21.50mm), sash (30mmx 18 mm) profile to be inserted in required profile frase will be fixed to the wall with 8mmx100mm long fasteners including hardware vz touch lock of zinc alloyed ( white powerder coated), steel roller system , aluminium track on bottom rail two track sliding frame wool pine for sliding sash and interlock complete. Note: The unit rate quoted by the contractor excludes cost of glass. Net openning will be measured for payment purpose.

M&L for providing and fixing factory made UPVC (white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm having profileof hollow section with multi chamber. Frame size (60mmx58mm), sash (60minx78mm), T profile having one vertical length in between two shutters of size (60mmx 74mm) glazing head (35mmx 20mm) mitered cut and fusion welded at all corners including making holes for fixing hardware and drainage of water, provision of EPDM gasket 1.2 thick galvanised steel frame (28mmx21.50mm), sash (31mmx27mm). T profile (27x17mm) to inserted in required profile frame will be fixed to wall with 8mm x 100mm long fasteners including necessary hardware viz casement door handle made of zinc alloyed (white powder coated), corner striker, secondary strikers, cylinder, transmission gear made of mild steel with multi point locking system with strikes, hinges of zinc alloyed (white powder eoated) complete as specified. (Note:The unit rate quoted by contractor excludes cost of glass. Net opening will be measured for payment purpose.)

Providing and fixing lactory made uPVC ( white colour white colour Casement (Openable) window made of extruded profiles with wall thickness of 2.3min, havin profile with hollow section with multi chamber, Frame (60mm x 58mm). sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) mitered cut And fusion welded at all corners. including (drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. E.PDM gasket. 1.2 thick galvanized steel frame (28mm x 21. 5mm, sash (31mm x 27.5mm), T profile (27mm x 17mm) to be inserted in required profile. frame will be fixed to wall with 8 mm x 100mm long- fasteners includin hardware viz casement handle made of zinc alloyed (white powder coated), butt hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking s' stem complete. Note: The unit rate quoted by contractor excludes cost of glass. Net opening will measured for payment purpose.)

M&L for decorative type cornies of suitable width not exc 150 mm and thickness not exc 5mm made of plaster of paris sheets on wall and ceiling edges/ corners fixed with machine screws including prepration of surface and applying one coat primer and two coat of plastic emlusion paint all as specified and as directed.

M&L TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

Joist, channel, angle, or tee sections, fixed independently, without connection plate Fe 410-W (Gde E-250) quality A, etc.Complete all as specified and directed.

M&L for fixing of modular kitchen fittings with laminated wood work and stainless steel baskets of required size mounted on suitable channels including ball bearing to moving of baskets smoothly including all necessary fittings and fixture complete all as speified and as directed. Make - Kohler, Hettich and Godrej.

Dismantlibng wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&f stainless Steel work as in tubular pipe such purlins and rafter etc fixed with suitable arrangement as required complete all as specified and as directed.

M&L for marble of any shade other than white and black ( green Marble) 18- 20 mm thick ( table rubbed and polished ) in steps, Jambs,pillars, Cooking platform, floor and like in cement mortar (1:4) including pointing in white cement ( 1:2) using marble dust with admixture of pigment to match with marble laid over 20mm thik screed bed in CM 1:6 , bedded, jointed and pointed with grey cement slurry including cutting and polishing complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specifed and directed.

S&F first class teak wood panelled shutter 35mm thick (any number of panel) with panels of timber flat on both sides complete all as specified and as directed.

S&F first class teak wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joint. complete all as specified and as directed.

M & L for applying non- reactive, antifungal and water repellant silane/siloxane chemial of approved barnd by Archaeologial survey of India/Engineer-in-charge with following operations:- (a) Cleaning the stone surface and removing dirt, dust, bird dropping, grease, oil algae, fungus, monkey beats, vegetable growth etc & applying, washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent, cleaning with mechanical jet mixed with fine silica, washing the surfacewith pressure jet machine , including keeping safe joinery, structure. (b) Applying antifungal using 3% solution of sodium pentachlorophenate, on cleaned sand stone surface. (c) Applying breathable, non- reactive, antifungal and water repellant silane/siloxane chemial of approved brand and manufacture, diluted with solvent mineral:Turpentine oil in the ration of 1:12 on sand stone masonery surface with two or more coats. (d) Applying two coat of Ethyl Slicate chemical with brush or spray on stone masonery surface till there is no further absorption including protecting the applied surface from direct sunlight all complete. Note : The rate is inclusive of all materials, labours and scaffolding involved )

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thickness including cover fillets.

M&L of false ceiling in step(s) comprising of 12mm thick Gyp board including GI frame work for seamless ceiling made of GI perimeter channel 0.55mm thick with two unequal flange of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flange of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurledweb of 50mm and flangeof 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with and including two coats of plastic emulsion paint complete all as directed. (Note:- The measurement shall be made from wall to wall flat.

Taking down carefully old unserviceable copper/aluminium point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc are to be measured seperately and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing etc complete all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC surface conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size and making good surface as original by plastering, whitewash/colour and distemper etc complete all as directed for the following :- (Note : The cost of modular type Metal boxes and modular accessories like cover plates will be included in quoted rate.):

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

Material and labour in replacement of TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit complete all as directed. Note : The PVC Conduit and conduit accessories shall be measured and paid separately .

All as per srl item no. 97 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for 16 Amp light point. Note : The point wiring for power point will not be mixed with light/fan point circuit or not in the same conduit pipe.

M&L in replacement for Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

M&L in replacement for Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed.

M&L in replacement for Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.

M&L in replacement for Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.

S & F in replacement of Modular Fan regulator step type, 120 watts, 2 Module size complete all as directed.

M&L in replacement of Modular Bell push switch 6 Amp 1/2 module size complete all as directed.

M&L in replacement of Modular TV socket (RJ 11 Socket Jack) 01 Module size socket as per site requirement complete all as directed by the Engr-In-Charge.

M&L in replacement for Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. Note : 1. The conduit and conduit accessories shall be measured and paid as one unit.

M&L in replacement for Sub main wiring with 2 run of 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. Note : 1. The conduit and conduit accessories shall be measured and paid as one unit.

Supply and fixing in replacement of MCCB Incommer Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

Supply and fixing in replaement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

S & F in replacement of MCCB 3 P, 415 Volt adjustable type 100 Amp with breaking cap 25 KA with over load and short circuit protection as specified.

Supply and fixing in replacement of MCB C Curve type, 10 KA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 KA, 40 to 63 Amp, SPN with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of Modular sheet metal enclosure, SPN type (Modular AC Box) with and including one Power socket and one Modular type MCB SP, C Curve type of capacity 32 Amp, 10 kA complete all as directed.

S & F in replacement of Bell DINGDONG type, 6 Amp, 240 volts, SP all as specified.Make:- Anchor/Cona

Supply and fixing in replacement of LED tube light fitting, 22 watt, Aluminium extruded body, wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as directed.

S & F in replacement of wall mounted LED light, Fancy type including 9W LED bulb and all electrical connection,as per sample approved by the Engr-in-Charge completed all as specified. Make :-Halonix Cat Part-HLWB-01-B22 or equivalent from the list of makes.

Supply and fixing in replacement of LED mirror light fitting 12 watt, wall mounted type and making all electric connections complete all as directed.

S & F in replacement of bed side light fittings including 9 W LED lamp, fancy wall mounted type including fixing accessories, as per sample approved by the Engr-in-Charge complete all as specified and directed.

S & F in replacement of Energy efficient wall mounted LED Bulk Head luminaire 10W made of die cast Aluminium with Opal diffuser IP-65 complete all as specified and directed.

S & F in replacement of picture focus LED light 12 W, fancy metal body wall mounted type including fixing accessories complete all as specified and directed.

Supply and fixing in replacement of LED security light luminaire 45 watt (white) pressure die cast aluminium housing with heat resistance toughned glass & IP- 66 protection with and including driver/transformer complete all as directed.

S & F in replacement of security light fitting bracket, 1.5 mtr long , 40mm dia, made out of galvanized iron pipe light grade suitable size of security light fitting complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

Material and labour in replacement of telephone wiring with twin core PVC insulated, PVC sheathed cable suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn in separate concealed PVC conduit complete all as specified and directed. Note : The PVC Conduit and conduit accessories shall be measured and paid separately under respective item. Make of cable : Havells, Rallison,L&T

M&L in replacement of Modular Telephone socket Jack 01 Module size socket as per site requirement complete all as directed by the Engr-In-Charge.

Supply and fixing in replacement of automatic hand dryer hot air dispenser with infrared sensor, metal body, 5 star ratings with all accessoried including electrical connections complete all as specified.

Supply and fixing in replacement of automatic motion sensor 5 star ratings with all accessoried including electrical connections complete all as specified.

S & F in replacement of round recess mounting downlight slim type, LED luminaire light 15/16 W cool white , input voltage 230 Volt, 50HZ with driver/transformer etc suitable for AS/GB/POP ceiling incl making electric connection complete all as specified and directed.

S & F in replacement of round recess mounting downlight slim type, LED luminaire light 9W cool white , input voltage 230Volt, 50HZ with driver/transformer etc suitable for AS/GB/POP ceiling incl making electric connection complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints including excavation and earth work, GI pipe light grade 15mm bore for protection of G.I. wire from earth electrode to the Main switch/Distr Board, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B-1 using 20mm graded stone aggregate chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, round, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified & directed.

imran construction company