SPECIAL REPAIR TO BLDG NO IHC-14 (MES IB) UNDER GE (MCTE) MHOW

Amount

B/R WORK

S & F in repairs Vitreous China Thin Rim Table Top Basin. Shape -Round, Size - 360 x 360 x 120mm. Make : Jaquar Cat Part No SLS-WHT-6905 or equivalent approved by GE.

S & Fix in repair Vitreous china EWC with PP soft close seatcover, Hinges, Fixing Accessories Set and Cistern fittings, Size : 360 x 640 x 685mm, P Trap 180mm. Make : Jaquar Cat Part No SLS-WHT-6851P180PP or equivalent approved by GE.

S & F in repairs Faucets Single Lever Basin Mixer with Popup waste with 450mm Long Braided Hoses. Make : Jaquar Cat Part No OPP-15051BPM or equivalent approved by GE.

S & F in repairs Angular Stop Cock with Wall Flange. Make : Jaquar Cat Part No OPP-15053PM or equivalent approved by GE.

S & F in repairs Two way Bib Cock with wall flange. Make : Jaquar Cat Part No OPP-15041PM or equivalent approved by GE.

S&F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (withoutHand & Overhead Shower). Make : Jaquar Cat Part No SOL-6281 or equivalent approved by GE.

S&F in repair Towel Ring Round with Round Flange. Make : Jaquar Cat Part No CAN-1121BN or equivalent approved by GE.

S&F in repair Soap Dish Holder. Make : Jaquar Cat Part No ACN-1131N or equivalent approved by GE.

S&F in repair Soap Dispenser with Glass Bottle. Make : Jaquar Cat Part No ACN-1135N or equivalent approved by GE.

S&F in repair Toilet Roll Holder. Make : Jaquar Cat Part No ACN-1151N or equivalent approved by GE.

S&F in repair Tumbler Holder. Make : Jaquar Cat Part No CAN-1141N or equivalent approved by GE.

S&F in repair Towel Rack 600mm Long without hangers, Stainless Steel. Make : Jaquar Cat Part No ACN-1181FS or equivalent approved by GE.

S&F in repair hand Shower (Helath Faucet) with 1 meter Long Easy Flex Tube in Chrome Finish & wall Hook. Make : Jaquar Cat Part No ALD-565 or equivalent approved by GE.

S&F 450mm Long Brainded Hose with Two 15mm Nuts & Rubber Washers without Nipple (Suitable for Geysers) Jaquar Cat Part No ALD-805B or equivalent approved by GE.

S&F 600mm Long Braided Hose with M10 x 1 Nipple, 15mm Nuts, O-Ring & Rubber Washers (Suitable for Tall Body Basin Mixer). Make : Jaquar Cat Part No ALD-801B or equivalent approved by GE.

S&F Bottom trap 32mm size with 300mm & 190mm Long Wall connection Pipes & wall Flange. Make : Jaquar Cat Part No ALD-769L300 x 190 or equivalent approved by GE.

S&F Maze Overhead Shower 300 x 300mm Square Shape Single Flow Body & Face plate Stainless Steel with Chrome Finish with Rubit Cleaning System. Make : Jaquar Cat Part No OHS-CHR-1639 or equivalent approved by GE.

S&F Hand Shower 105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System. Make : Jaquar Cat Part No HSH-1717 or equivalent approved by GE.

S&F in repair Ritz Collection-Corner enclosure with 2 fixed glass and 1 openable door fixed with wall. Glass - 8mm, Finish -Chrome, Left version, JSE-CHR-R840W1620L, H-1950, W-1600-2000. Make : Jaquar Cat No R1840W or equivalent approved by GE.

S&F Corner Glass Shelf (with Bracket). Make : Jaquar Cat Part No ACN-1173 or equivalent approved by GE.

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern), Stop cock/ angle cock all as specfied and directed.

S & F in repairs Two Way Angular Stop Cock with Wall Flange. Make : Jaquar or equivalent approved by GE.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of size 600 x 1200 x 8-10mm thick in vertical surfaces, as in wall etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 350 x 250 x 7mm/ 450 x 350 x 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

M & L for Vitrified Ceramic tiles 10mm thick dark shade double charged/ ultracharged (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

All as per item No 29 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for taking down/ dismantling of existing roof treatment of any description such as PCC Padding/ Coba treatment/ mud phuska/ Lime conc, Old APP membrance roof treatment etc terracing including screed bed etc. Hessian base felt/ tar felt etc. (any type and thickness) complete all as specified & directed.

M&L for Removal of demolished materials to a distance exceeding 250 Mtr but not exceeding 500 Mtr and deposting where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on roof surface including mixed with WPC as per manufacturer's instruction's and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respective item of sch 'A'.

Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gaurantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3mm thick APP polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed. (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface. Note :- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

M & L for Demolition of ends for damaged portion of chajja/ facia portion scrafying or removing Old loose dirt of cement concrete and removing of Old rusted reinforcement, lathing/ welding of new reinorcement for damaged portion, fixing of 0.71mm dia wire netting of galvanised steel wire of size 12mm mesh fixed with tinned tack of wire stable for damaged portion and applying in CM (1:3) with level plaster for width of facia/ Chajja exc 10mm and n.exc 60mm finished even and smooth without using extra cement and including necessaryuse and waste of form work and concerting with PCC (1:2:4) type B-0 using 25mm graded stone agg mixed with Dr fixit concrete bonding solution as per manufacturer Instruction for required places, height of the bldg up to third floor from the above ground level for work. Width of Chajja/ facia exc 30 cm but not exc 90 cm all as specified and directed.

M & L for RCC 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) as in Patch work for certain places of Roof slab, facia, Chajja with necessary from work and the height of the bldg up to third floor form the above ground level for work all as specified and directed. (Note :- Rate includes for reiforcement also)

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door Chowkats of size 65 x 125mm double rebate of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100 N (Edge), minimum compressive strenght of 58 N/mm sqr, modules of elasticity 900 N/mm sqr and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure prooof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and lenght complete as per direction of Engineer-in-Charge. (MS hold fast/lugs or SS dash fasteners etc. Make : ECOCELL (Product of Kumar Arch Tech Pvt Ltd), Floresta, of equivalent approved by GE.

S&F SS grade 120mm size, hinges, heavy weight, all as specified and directed by Engr-in-Charge.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE FLUSH DOOR SHUTTER of size 30mm thick comprising of virgin PVC polymer of K value 58-60 (Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/ cum, screw withdrawal strenght of 1800 N (Face) & 900 N (Edge), minimum compressive strenght of 50 N/mm sqr, modules of elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ mositure prooof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per the direction of Engr-in-Charge. Note :- stainless steel butt hinges and necessary scews shall be paid seperately. Make : ECOCELL (Product of Kumar Arch Tech Pvt Ltd), Floresta, of equivalent approved by GE.

S&F 200mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F 150mm size extruded aluminium alloy handles, fabricated type.

S&F powder coated aluminium sliding window three track with two glass shutters using 5mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperature 1.61mm using aluminium powder coated section aluminium cleat, PVC track, bearing, handle, lock, rubber beading etc complte fittings.

S&F powder coated anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishing the demolished surfaces with rendering 10-15mm thick CM 1:4 of fair finish including 02 coat of cement based paints with primer incl all fittings, accessories etc all as specifed and directed by Engr-in-Charge.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. (Except for item No.43 & 45 Above)

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified.

M&L for 5.5mm thick sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/ slabs/ blankets any thickness including grid work/ aluminium frame work, cover fillets complete all as specified.

M&L for providing PVC WALL PANELLING of 5mm thick consisting of panel of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelaminated PVC sheet. The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company. The strips should have in their centre a gove of 6mm widht and 1mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement.

M&L for 10-12mm thick decorative plaster of paris false ceiling bending/ moulding as required shape with two coats of plaster emulsion paint over a coat of primer on decoratived surfaces of ceiling including 26 gauge galvanished iron sheet 'C' shaped main member @ 750mm C/C cross member 'U' shape @ 450mm c/c and perimeter of 'C' shaped GI wire 6mm dia or more or FI 40 x 4mm thick for hanging arrangement with MS suspension fastner spaced @ 450mm C/C in both direction and 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 mtr height as required at site complete all as specified and directed.

S & F PVC size 110 x 110mm Nahani Trap all as specfied and directed .

S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.

S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification.

S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc.

S & F Continuous (piano) hinges, 30mm Width of flaps (when open) in mm brass, bright finish or electrogalvanised Continuous (piano) hinges, bright finish or electrogalvanised.

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed.

S& F 100mm size MS mat/ glossy finish handle complete all as specfied and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item of sch A.

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

M&L for preparation of newly surfaces of walls and applying two coats of with Premium Acrylic Smooth exterior paint and including priming coat of exterior primer and incl one coat birla white wall putty as per manufactures instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/ spray/ roller of building upto the height G+2) all as per directed by Engr-in-Charge with four year gaurantee.

M&L for complete removal of exisitng surfaces of walls and applying two coats of with Premium Acrylic Smooth exterior paint and including priming coat of exterior primer and incl one coat birla white wall putty as per manufactures instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/ spray/ roller of building upto the height G+1) all as per directed by Engr-in-Charge with four year gaurantee.

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces pf plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat birla white wall putty all as directed by Engr-in-Charge.

M&L for complete removal of existing treatment of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat birla white wall putty all as directed by Engr-in-Charge incl preparation complete.

M&L for Rendering 5mm thick on fair faces of concrete/ brick interior ceiling surfaces in cement mortar 1:3 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat ceiling birla white putty all as directed by Engr-in-Charge.

Taking up or down 15mm bore steel tubing and connections,including cleaning for refixing or removal to store complete all as specified.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

Fixing only 20mm bore galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/ spring clips and providing and fixing new ones.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair 40mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Dismantling of 75mm internal dia cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches or floor or wall if required.

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

S&F in repair PVC (SWR) bend/ shoe 75mm bore, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 75mm bore, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

Dismantling of 110mm internal dia cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches or floor or wall if required.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants with minimum 3 feet distance at wall etc complete all as specified and directed.

S&F in repair PVC (SWR) bend/ shoe 110mm bore, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 110mm bore, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm- 690 gms)

S&F in repair Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm- 690 gms)

S&F in repair Ball valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm- 690 gms)

Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc. 500 litre and removing from site complete and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical vertical with closed top) hoisted with and including 20mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part-I complete all as specified & directed.

Disconnecting & taking down existing water tank of capacity exc 500 liter and not exc. 1000 litre and removing from site complete and S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical vertical with closed top) hoisted with and including 20mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part-I complete all as specified & directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed.

M&L for Brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed.

Taking down old curtain rods/ drapery rods of any description and S&F 25mm Stainless Steel Curtain rod with premium quality including brackets and other accessories complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed.

M & L for two coat of synthetic enamel paint on surface of any description over 10 cm in width or girth not otherwise described incl preparation of new steel surfaces.

Dismantling of stone slab and tiles, interlocking paver block laid bedded and pointed in any mortor of any description or thickness in floor complete all as specifed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) specified complete all as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) as in sub bases of paver block etc all apecified and directed.

Re-fixing only the old paver Machine pressed coloured rubber finish precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments over 30-40mm thick sand cushoining (Note :- (i) Sand Cushoining measured and paid seperately. (ii) Paver block as obtained from dismantling of Sl item No.101 above will be reused)

M&L for 30-40mm thick sand cushioning below the paver block all as specified and directed by Engr-in-Charge.

S & F Granite black/ green 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litre per sqm of the vertical surface of sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete.

M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes in apron

M&L for ATT of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors

M&L for ATT at point of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/ hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. (Note for Sl. Item No106 to 109 :- Work of ATT shall be carriedout through approved pest control applicator approved by GE)

M&L for Double action floor spring hydrauically regulated made up of minimum 1.25mm thick aluminium alloy sheet aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot of brass, other parts made of mild steel heavy duty and fixed.

S&F in repair aluminium (extruded section body) door closer hydraulically regulated, designation No 1 universal type, suitable for door shutters up to 700mm in widht and of weight not more than 35 kg and fixed.

M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over ad including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

E/M WORK

Taking down copper/ aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and refixing the same with cairfully after compltion of B&R Work complete all as specified and as directed.

Taking down carefully copper/ aluminium Sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and efixing the same cairfully after compltion of B&R Work complete all as specified and as directed.

Taking down old/ unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2mm thick, 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light/ fan/ bell point controlled by one, one way switch 5 Amps

(b) One light point controlled by two, two way switch 5 Amps

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the SAME BOARD.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

All as per item No.119 here in before but using 2.5 sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

All as per item No.119 here in before but using 4.0 sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 4.0 sqmm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for Bell push modular 6 Amps single module complete all as specified.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix in repairs white finished single mounting modular plates suitable for modular accessories of following sizes as per specified and directed by Engr-in-charge. (Make : Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS).

(a) Sutable for 1/2 modules

(b) Sutable for 3 modules

(c) Sutable for 4 modules

(d) Sutable for 6 modules

(e) Sutable for 8 horizontal modules

S&F (in replacement) MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 63 Amps rating, 16 KA breaking capacity complete

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

S & F for lamp holder, PVC/ Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed. Make : Bajaj, Havells, HPL

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 01 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Havells Cat Part No LHEXBLP7PN1W020, Wipro Cat Part No LL20-281-XXX065-ALI or its equivalent in Philips, Bajaj approved by GE.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 watts complete all as specified and as directed. Make Havells Cat Part No. LHDLO6160099 or its equivalent in Philips, Bajaj approved by GE.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make : Bajaj Cat Part No BCLSB 10 NW or its equivalent model in Wipro, Philips approved by GE.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 01 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make : Bajaj Cat Part No. BIBWP 10W LED or its equivalent in Philips, Wipro approved by GE.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge. Make : Bajaj Cat Part No ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent in Philips, Wipro approved by GE.

S & F for LED luminaire 600mm x 600mm square LED panel 35/36 watts, 220 volts, AC surface/Recessed WW type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer-in-charge. Make Crompton Greaves Cat Part No LCTLRNE-36-FO-CDL its equivalent in Philips, Wipro, Havells approved by GE.

S & F for LED down light luminaire Round surface/ Recessed mounted LED panel. PDC aluminum housing and high translucent frosted plastic diffuser makes it a robust Luminaire. Efficacy 100 lm/w round shape 12 watts, white finish operating voltage 150 Volts - 270 Volts AC, 50 Hz, recessed/ surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge. Make : Crompton Greaves LCDSPLN-R-12-NW equvialent in Philips, Wipro, Havells approved by GE.

S & F for LED post top lantern 30 watt light fitting made of fully cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection with polyurethane paint with acrylic window cover, provided B22 brass holder with aluminium cover complete with all accessories fixed on GI pipe 50mm dia including removal of old unserviceable one complete all as specified and directed. Make : Mepro Cat Part No PTL-0002 or its equivalent in Bajaj, Philips, Wipro approved by GE.

S & F for sheet metal enclosure MCB, DB, SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with onesingle pole MCB SP 20 Amps complete all as specified and directed.

S & F for Modular type TV Socket out let complete all as specified and as directed.

S & F for Modular typeTelephone socket outlet complete all as specified and direced.

S & F for Modular type RJ 45 with shutter complete all as specified and as directed.

S & F for ceiling fan, 230 Volts, 50Hz, 1200mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal including writting the MES Number with synthetic enamel paint complete all as specified and as directed.

M&L for wall fans 450mm sweep, 230 volts, 50 Hz complete with mounting brackets all as specified and directed.

S & F for water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts,BEE 5 star rated, ISI marked including 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold for MES IB incliding writting the MES Number with synthetic enamel paint complete all as specied and as directed.

S & F for energy efficient exhaust fan of 230/300mm sweep made of metal body Ventil Air-DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint compelte all as specified and directed. Note :- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted.

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

S & F for Decorative wall mounted luminaire made out of Cast Aluminum body finished with Polyurethane Paint (With Prior Treatments) with acrylic window cover. B22 Brass holder provided with aluminum cover. As per : IS 10322 PART-5 SECTION-1 LATEST 2017 suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed. Make : Mepro Cat Part No. WBL-07or its equivalent in Philips, Bajaj, Havells approved by GE.

Supply and Fix in repairs flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for 100-125 Amps MCCB as incomer and SPN/ TP MCBs as out going, 4 way (Optium 1+12 Module) complete all as specified and directed by Engr-in-Charge.

S & F Glaze LED Bollard fitted with low glare diffusers quare/ round shaped with IP 65 protection suitable for 10 watts LED lights with necessary MS base box made out of MS sheet of 2mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size including removal of old unserviceable one complete as all specified and as directed. Make : Surya Cat Part No SLE BL 10W-GLZ1000 NX or its equivalent in Bajaj, Havells, Phillips, Wipro approved by GE.

S&F Recessed mounted 600 x 600mm LED Luminaire with CRCA housing with occupancy sensors and dimmable tunable function with RF remote. Its ultra bright LEDs provides uniform light distribution which make it best in class proposition for modern work spaces. Suitable for armstrong/ grid/ POP ceiling, an additional mounting frame is required for gypsum/ POP Make : SURYA Cat Part No SLE DS 42 22R-ASTRUM PIR equivalent in Bajaj, Havells, Phillips, Wipro approved by GE.

S&F Outdoor Strip light (24V DC) 5W/Mtr WW/CW Make : Jaquar, Havells, Bajaj or equivalent approved by GE.

Sppply & Laying XLPE insulated, armoured, electric cable of size 10 sqmm 2 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed.

Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply laying and jointing GI pipe 'light grade' 40mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed. (Note : Punned thickness shall be measured)

M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR Part-I including excavation and earthwork in any type of soil/ strata and testing on completion. Note :- GI earth wire 4mm dia and 15mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

M/s Shree Ganesh Traders

sunway associates

SATHI ENTERPRISES