REPAIR AND MAINTENANCE OF PLASTERING, PATH, B/WALL, PERIODICAL SERVICES AND MISC B/R WORKS AT ELECTRIC SUPPLY AND WATER SUPPLY INSTALLATION UNDER GE (U) MEERUT CANTT.

Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering in cement mortar (1:6), 10mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering in cement mortar (1:4), 15mm thick on other than fair faces of brick work / stone masonary surfaces finishedfair and even without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

ditto as per above item no-3 but except bricks complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm thick wall putty, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L for newly plastered surfaces two coats of cement base paint over one coat of cement based primer on plastered/ concrete surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for preparation of old plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm thick wall putty, complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M&L for preparation of old steel surfaces over 10 cm width or girth & applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L, for machine pressed precast concrete interlocking paver block 60 mm thick,any shape and size confirming to IS-15658-2006,M-35 grade with grey cement and no pigment laid over old existing sand cushioning, complete all as specified and directed.

M & L for 75 mm thik in sub base Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M & L for 30 mm thik sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness(below or above ground level), complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding and backing, complete all as specified and directed.

M&L for glazed ceramic coloured tiles, size 450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over 10 mm thick screed plaster in CM 1:4 complete all as specified and directed

M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repair wash hand basins vitreous china, coloured flat back size 450 x 300mm fixed including bracket, waste pipe and waste coupling complete all as specified and directed.

S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

S&F in repairs 15mm bore cast copper alloy chromium plated fancy type bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair fancy type angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F in repair new rigid PVC waste pipe of approved quality 32mm bore, 75mm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M & L for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fixing in repair ball valves of size 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified and directed.

M& L for Complete removal of existing treatment for Preparing old decorated plastered surface of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including writting slogen in hindi letter on side ogf water tank domb as example jal hi to jivan / jal hai to kal hai as per directedand complete all as specified. Note:- The rate quoated including scaffoldingi five to nine storeys of over head tank (Approx Hight from 13.2 to 26.4 M)

Ditto as per above item 33.00 but in ceiling as dom area of over head tanks complete all as specified and directed. Note:- The rate quoated including scaffoldingi nine to storeys of over head tank (Approx Hight from 13.2 to 26.4 M)

M & L for Providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), in cluding all mould- ings but excluding frame Type B0 1:2:4 (12.5 mm graded aggregate) set in cement mortor 1:4 complete all as specified and directed

Dismantling barbed wire of any description complete all as specified and directed by Engr-in-Charge.

M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed by Engr-in-Charge. (each line wire to be measured).

M&L for new plaster surface applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over a coat of 1mm thick wall putty. complete all as specified and directed.Make:-Apex Ultima protect/Berger paints(weather coat smooth)).

M&L for complete removal of existing treatment for Preparing old decorated plastered applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over a coat of 1mm thick wall putty. complete all as specified and directed.Make:-Apex Ultima protect/Berger paints(weather coat smooth)).

Please Enable Macros to View BoQ information