Loading
Loading…
Loading…
Tender Value
₹4.8 Cr
EMD Value
₹9.5 L
Closing Date
10 Sept 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
SR.DEN/W
25 conditions · 4 needing a document upload
No Technical and Financial credentials are required for tenders having value up to Rs 50 lakh
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments'' in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) (v) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC April - 2022 [with up to date correction slip].
(a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Tenderer shall carefully read clause No. 10 including clause no. 10.1 to 10.5 of IRGCC April 2022.
The total value of similar nature of work completed during the qualifying period and not the payments received within qualifying period alone, shall be considered. In case, final Bill of similar nature of work has not been passed and final measurements have not been recorded, the paid amount including statutory deductions will be considered. If final measurements have been recorded and work has been completed with negative variation, then also the paid amount including statutory deductions will be considered. However, if final measurements have been recorded and work has been completed with positive variation but variation has not been sanctioned, original agreement value or last sanctioned agreement value whichever is lower shall be considered for judging eligibility.
In case JV firms are allowed to participate, Technical Eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.1 of J.V. guide lines of IRSGCC April-2022 [read with up to date correction slip].
The value of work completed will not include the cost of any materials issued free of cost by the Railway/ Department concerned. Price Variation amount, if any; if indicated / incorporated in the experience certificate will also be considered towards eligibility.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
The work experience certificate shall be in the name and style of the 1.5.1 tenderer participating or as per provisions under Clause 17.15 of GCC April-2022 for JV Firm, if eligible to participate.
The work experience certificate shall be issued by an officer not below the rank of JA Grade or Bill passing Officer in Railways and Bill passing Officer/Executive In-charge of work in other Govt. / Govt. bodies / PSUs. The certificate should bear the signature and seal of the issuing officer, name of the department etc. In case tenderer submits work experience 1.5.2 certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Civil Engineering work involving Building work/Concrete work. Tenderer should have valid electrical contractor's license in his/their name or he should give an undertaking that he will engage capable agencies for electrical work who has the valid electrical contractor license in his/their name.
80 conditions · 25 needing a document upload
Uploading of Proforma-18 attached with Tender document (Certificate signed by Tenderer and Chartered Accountant), w he n balance sheet for the first previous year is yet to be prepared/ audited.
TENDER SHALL BE REJECTED if it is not accompanied by the following
Uploading of Proforma (Proforma-16) attached with Tender Document for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores.
Uploading of Proforma (Proforma-17) attached with Tender Document for Certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores.
Bid Security deposited through IREPS e-payment or as per provisions under Clause 5 (2) Part-I of GCC April 2022.
In case of Partnership firm: The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted 2.3.2 only in the name of the JV and not in the name of any constituent member.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender 2.3.3 documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90days beyond the bid validity period.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured:- i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered to the Divisional Railway Manager(Works),2nd floor, Irwin Road,South Western Railway, Mysore-570001, within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the 2.3.4 data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to the Divisional Railway Manager(Works),2nd floor, Irwin Road,South Western Railway, Mysore-570001 viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder. ix. The benificiary for the PG will be Senior Divisional Finance Manager, South Western Railway, Mysore
Proforma-16 for self-certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement order value less than of Rs. 10 Crores. OR Proforma-17 for Certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. Provisions of Make in India Policy 2017 (revised during 2024 vide Department for Promotion of Industry and Trade, Ministry of Commerce and Industry's letter No. P-45021/2/2017-PP (BE-II)-Part(4)Vol.II dated 19.07.2024) issued by Govt. of India, as amended from time to time, shall be followed for consideration of tenders.
Uploading of Proforma -18 attached with Tender document (Certificate signed by Tenderer and Chartered Accountant), w he n balance sheet for the first previous year is yet to be prepared/ audited.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) documents shall be submitted according to clause 14 of IRGCC 2022:
SW-I:-SSE/WORKS/SKLR - Re-construction of 16 units of Ty-II Quarters at SKLR-16 in lieu of condemned quarters.SW-II: Construction of one Lift wellSW-III:- SSE/WORKS/SKLR - Re-construction of 16 units of Ty-II Quarters at SKLR-16 in lieu of condemned quarters(Electrical Arrangements).SW-IV: Construction of one Lift well(Electrical Arrangements)Component Value of civil engineering work is Rs.42122209/- and value of electrical work is Rs.5449703.6/-)
27MYS26of19-08-26itno02~SWR
27MYS26of19-08-26itno02
Open
Works - General
12 Months
Dharwad, Karnataka
₹0
₹9.5 L
19 Aug 2026
19 Aug 2026
27 Aug 2026
175 items across 4 schedules · ₹1,11,74,108.63 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 275 | 177.5 | 48,812.5 |
| 2 | Ordinary rock | cum | 50 | 498.9 | 24,945 |
| 3 | All kinds of soil. | cum | 1300 | 260.3 | 3,38,390 |
| 4 | Ordinary rock | cum | 50 | 632.95 | 31,647.5 |
| 5 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | Metre | 100 | 352.15 | 35,215 |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 1675 | 196 | 3,28,300 |
| 7 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 95 | 7,178.75 | 6,81,981.25 |
| 8 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 165 | 410.85 | 67,790.25 |
| 9 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | Sqm | 140 | 749.3 | 1,04,902 |
| 10 | Concrete of M20 grade with minimum cement content of 270 kg /cum | cum | 50 | 9,212.6 | 4,60,630 |
| 11 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 540 | 392.15 | 2,11,761 |
| 12 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 1600 | 927.25 | 14,83,600 |
| 13 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 2650 | 736.4 | 19,51,460 |
| 14 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 1350 | 961.3 | 12,97,755 |
| 15 | Stairs, (excluding landings) except spiral- staircases | Sqm | 300 | 764.95 | 2,29,485 |
| 16 | Under 20 cm wide | Metre | 120 | 208.55 | 25,026 |
| 17 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 100 | 951.1 | 95,110 |
| 18 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 10 | 10,585.9 | 1,05,859 |
| 19 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 335 | 9,655.7 | 32,34,659.5 |
| 20 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 510 | 10,011.35 | 51,05,788.5 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 140 | 7,311.25 | 10,23,575 |
| 22 | Area of slab over 0.50 sqm | Sqm | 200 | 5,136.3 | 10,27,260 |
| 23 | Granite work | Metre | 600 | 510.95 | 3,06,570 |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 260 | 1,267.95 | 3,29,667 |
| 25 | Second class teak wood | cum | 10.5 | 1,42,949.7 | 15,00,971.85 |
| 26 | 35 mm thick shutters | Sqm | 58 | 4,111.95 | 2,38,493.1 |
| 27 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 120 | 2,241.8 | 2,69,016 |
| 28 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 120 | 3,473.85 | 4,16,862 |
| 29 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 12 | 462.35 | 5,548.2 |
| 30 | 20 mm dia | Metre | 64 | 393.25 | 25,168 |
| 31 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 8640 | 238.35 | 20,59,344 |
| 32 | With 12 mm mild steel U beading | Sqm | 120 | 939.2 | 1,12,704 |
| 33 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 260 | 228.85 | 59,501 |
| 34 | 300x16 mm | Each | 65 | 216.55 | 14,075.75 |
| 35 | 125x64x1.90 mm | Each | 246 | 118.2 | 29,077.2 |
| 36 | 250x10 mm | Each | 65 | 441.6 | 28,704 |
| 37 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 17 | 854.65 | 14,529.05 |
| 38 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. | Each | 80 | 151.05 | 12,084 |
| 39 | Single rubber stopper | Each | 17 | 39.6 | 673.2 |
| 40 | 152x42x18 mm weighing not less than 60 gms | Each | 96 | 69.75 | 6,696 |
| 41 | Triple strip vertical type | Each | 50 | 52.5 | 2,625 |
| 42 | Double strip (horizontal type) | Each | 50 | 39.7 | 1,985 |
| 43 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. | ONE SET | 80 | 414.2 | 33,136 |
| 44 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) | Each | 80 | 20.4 | 1,632 |
| 45 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 240 | 570.95 | 1,37,028 |
| 46 | Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). | Sqm | 120 | 10,993.55 | 13,19,226 |
| 47 | 125 mm | Each | 130 | 119.2 | 15,496 |
| 48 | 200 mm | Each | 192 | 186.65 | 35,836.8 |
| 49 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 192 | 272 | 52,224 |
| 50 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 200 | 117.35 | 23,470 |
| 51 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | Sqm | 1 | 11,439.6 | 11,439.6 |
| 52 | Hot finished seamless type tubes | Kg | 400 | 206.35 | 82,540 |
| 53 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 700 | 772.4 | 5,40,680 |
| 54 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 10 | 8,595.15 | 85,951.5 |
| 55 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 70 | 1,330 | 93,100 |
| 56 | Size of Tile 600 x 600 mm | Sqm | 125 | 1,464.85 | 1,83,106.25 |
| 57 | Size of Tile 600x600 mm | Sqm | 60 | 1,623.05 | 97,383 |
| 58 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 1200 | 3,186.7 | 38,24,040 |
| 59 | 110 mm diameter | Metre | 150 | 377.4 | 56,610 |
| 60 | 110 mm bend | Each | 40 | 150.35 | 6,014 |
| 61 | 110 mm Shoe | Each | 40 | 131.85 | 5,274 |
| 62 | 110 mm | Each | 150 | 371.3 | 55,695 |
| 63 | 2 mm thick flat | Sqm | 50 | 1,245.65 | 62,282.5 |
| 64 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 50 | 738.65 | 36,932.5 |
| 65 | Ridges plain (500 - 600mm) | Metre | 10 | 532.35 | 5,323.5 |
| 66 | 1:6 (1 cement: 6 fine sand) | Sqm | 6300 | 333.35 | 21,00,105 |
| 67 | 1:3 (1 cement : 3 fine sand) | Sqm | 1500 | 300.45 | 4,50,675 |
| 68 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 5750 | 262.7 | 15,10,525 |
| 69 | Flush/ Ruled pointing | Sqm | 600 | 385.4 | 2,31,240 |
| 70 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 5750 | 185.65 | 10,67,487.5 |
| 71 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 1500 | 160.6 | 2,40,900 |
| 72 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 120 | 176.25 | 21,150 |
| 73 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 500 | 170.7 | 85,350 |
| 74 | New work | Sqm | 320 | 197.65 | 63,248 |
| 75 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 50 | 2,017.6 | 1,00,880 |
| 76 | 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. | Sqm | 60 | 1,045.65 | 62,739 |
| 77 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 32 | 2,648.85 | 84,763.2 |
| 78 | 510x1040 mm bowl depth 250 mm | Each | 16 | 6,945.6 | 1,11,129.6 |
| 79 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge.(a) 15 mm nominal dia | Each | 16 | 6,940.75 | 1,11,052 |
| 80 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 32 | 1,607.95 | 51,454.4 |
| 81 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 100 | 1,151.9 | 1,15,190 |
| 82 | Sand cast iron S&S as per IS - 1729 | Each | 20 | 598.5 | 11,970 |
| 83 | Sand cast iron S&S as per IS: 3989 | Each | 32 | 1,996.5 | 63,888 |
| 84 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | Each | 16 | 231.95 | 3,711.2 |
| 85 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | Each | 16 | 18,212.9 | 2,91,406.4 |
| 86 | 25 mm nominal dia Pipes | Metre | 200 | 401.55 | 80,310 |
| 87 | 20 mm nominal dia Pipes | Metre | 200 | 537.6 | 1,07,520 |
| 88 | 50 mm nominal dia Pipes | Metre | 100 | 794.25 | 79,425 |
| 89 | 25 mm nominal bore | Each | 10 | 622.4 | 6,224 |
| 90 | 20 mm nominal bore | Each | 10 | 539.95 | 5,399.5 |
| 91 | 50 mm nominal bore | Each | 10 | 1,026.65 | 10,266.5 |
| 92 | 100 mm diameter | Each | 16 | 193.95 | 3,103.2 |
| 93 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 8000 | 11 | 88,000 |
| 94 | 15 mm nominal bore, 90 mm long, weighing not less than 93 gms | Each | 8 | 196.75 | 1,574 |
| 95 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 32 | 111.45 | 3,566.4 |
| 96 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 32 | 2,707.65 | 86,644.8 |
| 97 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 10 | 12,725 | 1,27,250 |
| 98 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 10 | 6,937.9 | 69,379 |
| 99 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 200 | 495.05 | 99,010 |
| 100 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 200 | 598.6 | 1,19,720 |
| 101 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | Sqm | 60 | 1,139.3 | 68,358 |
| 102 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 60 | 1,505.25 | 90,315 |
| 103 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | cum | 50 | 8,042.3 | 4,02,115 |
| 104 | P r o v i d i n g and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. | Sqm | 400 | 563.1 | 2,25,240 |
| 105 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 400 | 9,844.65 | 39,37,860 |
| 106 | Cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 2050 | 1,099.15 | 22,53,257.5 |
| 107 | 30 mm thick | Sqm | 70 | 4,764.2 | 3,33,494 |
| 108 | 18 mm thick | Sqm | 1280 | 2,992.9 | 38,30,912 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
N_12545_1784036636648.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo5.pdf Correction Slip No 5 to GCC 2022
ATTACHMENT
IRGCCApril2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo6.pdf Correction Slip No 6 to GCC 2022
ATTACHMENT
GCCACSCORRECTION.pdf
ATTACHMENT
ACS-3toGCC-2022.pdf
ATTACHMENT
JPOforcablecut.pdf
ATTACHMENT
Proforma161718.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo9.pdf Correction Slip No 9 to GCC 2022
ATTACHMENT
GCCAdvanceCorrectionSlipNo7.pdf Correction Slip No 7 to GCC 2022
ATTACHMENT
GCCAdvanceCorrectionSlipNo10.pdf Correction Slip No 10 to GCC 2022
ATTACHMENT
GCCAdvanceCorrectionSlipNo8.pdf Correction Slip No 8 to GCC 2022
ATTACHMENT
Correction slip to GCC 2022
ATTACHMENT
ACS-4toGCC-2022.pdf
ATTACHMENT
SKLRQrs.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo5.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo6.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo9.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo7.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo10.pdf
ATTACHMENT
GCCAdvanceCorrectionSlipNo8.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].