SPL REP TO OLD COOK HOUSE (BLDG NO EW-8) AT RAMESHWARAM LINES AND ROOF TREATMENT OF BLDG NO B-1 TO B-6 (JCOs MD ACCN) AT BASANTAR LINE OF 1 JAK LI AT MORABADI POCKET OF RANCHI MIL STN UNDER GE RANCHI

Amount

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering.

Dismantling timber scantling 40 sqcm and over in section in any position in framed work, complete all as specified and directed.

Dismantling of wall and ceiling board any thickness/description including cover fillet.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level).

Demolition of cement concrete (reinforced) any description and in any position.

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc, complete all as specified and directed.

Dismantaling floor, hearth or wall tiling, including cement mortar bedding (but not backing) removing serviciable tile to store & rubbish off the permisses.

Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site, complete all as specified and directed.

Excavating in post holes each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface of hard/dence soil, complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out soft/loose soil.

Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removing excavated materials not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil.

S&F prepainted galvalum aluminium zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Powder coated GI frame work for false ceiling of size of grid 605 x 605mm (consisting of angle or tee section size 24 x 24 x 1.5mm thick angle section and 24 x 32 x 1.5 mm Tee Section) Powder coated GI snap grid hanging with 02 mm dia GI hanger/wire fixed with steel dashed fastners, complete all as specified and directed.

M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping, complete all as specified and directed.

M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for roughening surface of old concrete floor by picking, sweeping cleaning and washing down with to remove dust, complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per Sqm, complete all as specified and directed.

M&L for cement concrete type B-1 1:3:6 (20 mm graded aggreate) as in coping etc similar work, complete all as specified and directed.

M&L for 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone agg) as in sub base floor surface, complete all as specified and directed.

M&L for 75mm thick PCC type C-2 1:3:6 (using 40mm graded stone agg) as in floor finishing surface of concrete topping even and fair without using extra cement, complete all as specified and directed.

M&L for PCC type C-2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains, complete all as specified and directed.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc, complete all as specified and directed.

M&L 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even, complete all as specified and directed.

M&L Non-skid Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including circular cutting,chamfering of edges, complete all as specified and directed.

M&L for treating the surface with beeswax polishing by machine to existing kota stone flooring, complete all as specified and directed.

M&L 10mm thick rendering as screed bed or bedding layer of mortar in CM (1:4) for lying floor finishes and surface fair and even, complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface of size 350 X 250 X 7mm/ 450 x 350 x 7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and directed.

M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) as bedding layer including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required, complete all as specified and directed.

M&L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and directed.

M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4, complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & even, complete all as specified and directed. (WPC will be paid saperatelly)

Supply only liquid water proofing compound.

M&L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc, complete all as specified and directed.

Use & waste frame work to soffits of suspended slab such as floor or roof slab, chajjas and similar work not exc 200 mm thick (Horizontal or slopeing) rough finished, complete all as specified and directed.

M&L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to, complete all as specified and directed.

All as per item No 41 above but 6mm to 8mm dia.

M&L for Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

M&L for 30mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2004) But, wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube shall be welded to MS tubes. The wire guge shall be streched to tighten firmly.

M&L Providing, cement concrete type B-0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work, complete all as specified and directed.

S&F 100 mm Butt hinges medium weight medium cold rolled mild steel.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F of 150 mm size extructed brass handles, fabricated type polished.

S&F for Mild steel 300mm, ordinary rat tail rod pattern springs incl roller and roller plate, complete all as specified and directed.

S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

Hacking out old broken glass any thickness, size, quality or description, from metal/wooden frame including punching or drilling out old glazing pins and removal of demolished material from site.

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flate iron 25x 3mm handle in each leaf, complete all as specified and directed.

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf, complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples over steel windows and gauzed door.

S&F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane, complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site.

S & F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Refixing old 15mm bore GI tubing medium grade galvanized with fitting fixed in new or old position complete.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site.

S & F, 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Refixing old 20mm bore GI tubing medium grade galvanized with fitting fixed in new or old position complete.

Taking up or down 25mm dia steel tubing and connection including cleaning for re-fixing or removal from site.

S & F, 25mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Refixing old 25mm bore GI tubing medium grade galvanized with fitting fixed in new or old position complete.

Dismantling water tanks Capacity in exc 500 & n exc 1000 litres and removing to store

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I.

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 25 mm bore pipe.

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm bore pipe.

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors.

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubberring joints, laid in trenches or in floors.

S&F PVC bends any radius 110 mm dia.

S&F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets or erecting stand and making necessary arrangement for fixing.

S&F 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.

S&F 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

S&F 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 32 mm dia waste/flush pipe for urinal and WHB, complete all as specified and directed.

Supply only 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.

S&F for stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, warshers waste pipe, cast iron catilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm.

M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

M&L preparation of new plastered surface of wall and applying two coats of oil bound distemper over one coat primer, complete all as specified and directed.

M&L preparation of complete removal of existing treatement from old plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty, complete all as specified and directed.

M&L preparation of new surface of wall and applying two coat of cement base paint, in any colour, complete all as specified and directed.

Complete removal of existing treatment of walls by washing rubbing down & stopping of painted surfaces and applying two coat of cement base paint, in any colour, complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc10cm width or girth not otherwise described, complete all as specified and directed.

M&L applying two coats of Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote, complete all as specified and directed.

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described, complete all as specified and directed.

M&L for machine pressed precast cement concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid over sand cushioning, complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

S&F for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and warsher in roof, complete all as specified and directed.

S&F for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc complete Fe 410-W(Gde E-250) quality-A.

S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E-250) quality-A.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165

S&F Flat iron/ angle iron for wind tie, hold fast to fixed door/window.

Removing/taking down of old water proofing treatment from roof/concrete surface removal to distance exc 250mtr and not exxc 500mtr from the site & cleaning of the roof surface with wire brush to make it free from dust, dirt etc, complete all as specified and directed.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete all as specified and directed.

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

M&L 50mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor using liquid water proofing compound to make surface in level, complete all as specified and directed. (liquid WPC shall be measured separately).

M&L providing, cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges with using water proofing compound, complete all as specified and directed. (liquid WPC shall be measured separately) .

M&L for bedding layer of mortar 10mm thick finished fair and even in CM 1:4 mixed with liquid water proofing compound, complete all as specified and directed. (liquid WPC shall be measured separately).

M&L cleaning plastered roof surface and applying a coat of Oxidised bitumen based solvented primer @ 0.3 kg/Sqm of approved make on top of dry surface of RCC roof, complete all as specified and directed.

M&L for applying a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm including cleaning surface before laying of APP Membrane, complete all as specified and directed.

M&L for APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with torch sealing with lap of 100mm and the overlap shall be selaed by flame complete all as per manufacturer instructions, complete all as specified and directed.

M&L for applying a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm including cleaning surface after laying of APP Membrane, complete all as specified and directed.

M&L for applying protective coating with bituminous based aluminium/Heat resisting paint in two coats, compete all as specified and directed.

Demolition and breaking up 100mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisteance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted) with silicon additives @ 1.43 litre /10 sqm over and including priming coat of exterior primer appplied @ 0.90 litre /10sqm over a coat of wall putty. over a coat of putty on new plastered wall surfaces incl preparation, complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisteance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted) with silicon additives @ 1.43 litre /10 sqm over and including priming coat of exterior primer appplied @ 0.90 litre /10sqm over a coat of wall putty on old wall surfaces incl complete removal of existing treatment, complete all as specified and directed.

S&F in repair Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.

Dismantling water tanks exc 250 & n.exc 500 ltr capacity and same was refixing, complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete with screws, gutties including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings, etc. removing materials to store for taking credit and making good disturbed surfaces of walls, floors, ceiling, etc.to match with existing surfaces, complete all as specified and directed.

M&L point wiring (concealed) with 1.5 Sqmm PVC insulated FR unseathed multi stranded copper conductor cable 1100 volts confirming to IS-694-1990 and one run continious earth wire with 1.5 Sqmm stranded core PVC insulated unsheathed FR copper conductor confirming to IS-6941990 in PVC Conduit concealed type incl PVC conduit/fitting etc, switch,sockets fixed to modular MS boxes and metal colour plate, complete all as specified and directed.

One light point controlled by one switch

One fan/exaust point controlled by one switch

One light point controlled by two 2 way switches, with cables 1.5 sqmm size

One 3 pin socket outlet 5 Amps, on the same board with other switches

One socket 3 pin outlet 5 amp on independent board.

All as per item No 115 above but with copper conductor for one 3 pin socket outlet 15 Amp independent board with cable 2.5 Sqmm including one run of 2.5 Sqmm copper conductor as earth continuity wire, complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 5 Amp 1 module, complete all as specified and directed.

S&F Modular switch 2 way 6A, 1 module, complete all as specified and directed.

S&F modular white cover plate with frame, 2 module. Make : Anckor/Legrand/Havells (Crabtree)HPL/C&S/SSK/ Cona/Kay/Plaza/Leader

S&F modular white cover plate with frame, 3 module Make : Anckor/Legrand/Havells/HPL

S&F modular white cover plate with frame,4 module. Make : Anckor/Legrand/Havells(Crabtree)/HPL

S&F modular white cover plate with frame,6 module Make : Anckor/Legrand/Havells (Crabtree) /HPL

S&F modular white cover plate with frame,12 module Make : Anckor/Legrand/Havells (Crabtree) /HPL

S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body, ac, 230 volts, complete all as specified and directed.

S&F in replacement of flexible wire twin core copper conductor of size 23/ 0.0076 for fans and fluorescent tube light, pendant fittings connection upto 1.50 mtr length, complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5A multipurpose, flush type, complete all as specified and directed.

S&F Switch socket outlet 3 pin 5 amp' flush type multipurpose, flush type, complete all as specified and directed.

S&F Switch socket outlet 3 pin, 15 amp, flush type flush type universal, complete all as specified and directed.

M&L in replacement of lamp holder, alongwith 12 Watt inverter bulb 4 hours backup light facility PVC/ Polycarbonate type with back plate suitable for batten fitting complete, complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light alongwith inverter 4 hours backup facility connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to the disturbed surfaces of wall/ ceiling to match with the existing surface, complete all as specified and directed.

S&F in replacement sub main wiring alongwith earth wire with 2 x 4.0 Sqmm + 1 x 2.5 sq. mm earth wire of FRLS PVC insulated copper 1100 V grade conductor, single core cable in surface/ recessed as required drawn in and including PVC conduit with all accessories such as saddles, screws etc, complete all as specified and directed.

S&F in replacement sheet metal enclosure for DB's for using MCB, MCB DB, single pole and neutral 8 ways double door with 200 amps rated bus bar 240 volts and all accessories, complete all as specified and directed.

S&F in replacement of MCB single pole and neutral 32-63 amps, 240 Volts.

S&F in replacement of MCB 6 to 32 amps single pole 240 Volts.

M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, complete all as specified and directed.

S&F in replacement of of XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volt grade, cross sectional area 16 Sq mm 4 core.

Excavation in trenches, not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth in loose / soft soil and getting out for laying of LT UG cable including levelling bottom surface, complete all as specified and directed.

M&L for sand cushioning in trenches including watering and consolidation as in cable protection complete all as specified all as per SSR Part-I, complete all as specified and directed.

M&L for sub class 'B' bricks, laid flat in trenches with width equal to width of the brick for the protection of under ground cable complete all as specified and as specified in SSR Part-I.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick, complete all as specified and directed.

Removing of excavated material to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as specified and directed.

M&L for GI tube, `light grade',, 50mm with all fitting; laid in trenches/with pole, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level,connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel including earth work in any type of soil, charcoal, salt filled around the earth plate as shown in electrical plate No. 5 of SSR part I 1991, 20 mm dia watering medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board including earth pit in PCC (1:3:6) type C-1 and 40 mm thick RCC cover reinforced with 8 mm dia MS bars @ 100 c/c both ways, funnel etc & testing, complete all as specified and directed.

S&F building LED security light 45 W IP 65 including angle of GI Pipe of 32/40 SQMM alongwith clamp, nut, bolt duly two coated paint, complete all as specified and directed.

jai maavindwashni sales & supply

Rajeev Ranjan