SUPPLY OF SPARES AND SERVICING OF 5 TON CAPACITY CANE UNLOADER

PART-A-SUGAULI-SPARES FOR 5 TON CAPACITY CANE UNLOADER

Hydraulic Cylinder for SWL 5 TON Cane Unloader Grab (Left & Right)

Seal Kit for Hydraulic Cylinder of Cane Unloader Grab

Hydraulic Hose Pipe for Hydraulic Cylinder with both side fittings, PIX-Xel X P3/4” W.P 310 Bar, Length-450 mm

Hydraulic Hose Pipe for Hydraulic Cylinder with both side fittings, PIX-Xel X P3/4” W.P 310 Bar, Length-550 mm

Thruster for 250 mm Break Drum Coupling of Cane Unloader, Suitable for Thruster Brake 34 Kg, 250 mm SWL-5 Ton

Suction Line Filter (Strainer SC3-040), Make - Hydroline

Return Line Filter (92619 10 C/K 23018/FA57-10), Make - Parker

Air Breather (Element S/E 20-25U), Make - Hydroline

Hydax Sleeve H -48

Vicker’s make Hydraulic pump for SWL 5 Ton cane unloader grab Model - PVQ40AL03AA10G070000020010CD0A

Brake Drum Coupling FBDGC dia. 250 mm

Break Liner 110 mm x 12 mm

Steel Wire Rope 19 mm , Construction 6/19 steel core

U-Clamp 19 mm

PART-B-LAURIYA-SPARES AND SERVICING OF 5 TON CAPACITY CANE UNLOADER

Right side Hydraulic cylinder for cane unloader grab.

Left side Hydraulic cylinder for cane unloader grab.

Hydraulic cylinder Seal Kit Set for 5 Ton Cane Unloader • 80 x 60 x 22.4 • 50 x 60 x 7 • 2.5 x 0.97 • 3.5 x 38 • 3.5 x 74 • 4 x 78

Hydraulic Hose pipe ¾” x 550 mm, one side bend, 215 bar

Hose pipe ¾”x 650 mm, one side bend, 215 bar

Suction line filter SC3-040

Return line filter 926169

Air breather S/e-20-25 U

Solenoid direction control valve Make-Eaton

Hydraulic gear pump 54LPM, Make-Dowty

Modular Pressure relief valve, 240 bar

Hose pipes, 1”x 26”, one side bend, 210 bar

Hose pipes, ¾”x 25” , one side bend, 280bar

Hydraulic fittings Adopter, minimess coupling, dowty seals

Allen bolts

Servicing of Cane Unloaders Scope of Job for Servicing: 1.Vendor will install pump along with all its accessories (Relief valve, Flanges, Hose pipes, Dowty seal, Allen bolts etc ). 2.After installation, vendor will check the machine for proper working. (leak-proof working and working pressure will be checked.) 3.Boarding and lodging will be in vendor scope. 4.Drill machine should be provided by client for holes to be drilled. 5.For fitting of coupling hub into shaft of motor and pump, client will provide tools and accordingly a worker or labor. 6.Service charges will be charged for this conversion (per grab ).

R D HYDRAULIC & ENGG.

Fluidline Hydro Equipments

M K ASSOCIATES