Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC 47 HUSENI LAKDA BAZAAR 242 BELLAIS ROAD MUMBAI 08 | MUMBAI | MUMBAI | MAHARASHTRA | 400008 | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.7 L+₹3.3 L (8.87%)Rejected-Finance NOT AVAILABLE | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹47.2 L+₹9.8 L (26.2%)Rejected-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹50.9 L+₹13.5 L (36.1%)Rejected-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L4 | Rejected-Finance Not Reasonable | |
| 5 | Rejected-Technical | - | Rejected-Technical Due to two class below firm |
Tender Value
₹56 L
EMD Value
₹1.1 L
Closing Date
29 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
SPL REPAIR TO ROOF, WINDOWS AND TOILETS AND CONNECTED WORKS OF BUILDING NO P-46 UNDER GE(W) COLABA, MUMBAI
2023_MES_626503_1
8805/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE(W) Colaba, Mumbai
₹1.1 L
Yes
8 Jan 2024
2 Nov 2023
1 Dec 2023
2 Nov 2023
29 Nov 2023
16 Nov 2023
Amount
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns with power/hand driven chisel as directed by the engineer-in-charge upto 25 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed. Note: 1. All loose unsound and cracked concrete shall be removed out side MD land. Note: 2. thickness shall be measured excluding plaster
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns with power/hand driven chisel as directed by the engineer-in-charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed. Note: 1. All loose unsound and cracked concrete shall be removed out side MD land. Note: 2. thickness shall be measured excluding plaster
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns with power/hand driven chisel as directed by the engineer-in-charge upto 60 mm average depth including saw-cutting of all edges making square shoulders of the cavities including complete all as specified and as directed. Note: 1. All loose unsound and cracked concrete shall be removed out side MD land. Note: 2. thickness shall be measured excluding plaster.
Cleaning loose concrete if any all around reinforcement including from behind the reinforcing bars to give an average 10 mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry and Applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge for old and new reinforcement any dia all as specified and as directed. Note : - Length of reinforcement bars cleaned of rust all around shall be measured for payment.
M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking for ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and as directed.
M&L mild steel TMT bars 5mm dia and over upto 10 mm in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed
M&L plastering 20-25 mm thick (Avg) polymer modified cement mortar in two coats, 15 mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction all as specified and as directedby Engr-in-Charge. Make Dr fixit repair Pro-Polymer mortar, FOSROC- RENDOROC S2- structural grade polymer mortar or equivalent in STP . Note : - Ready to use bags will be used for the above item and no extra cost wiil be claimed by the contractor
Providing and placing in position micro-concrete, grade M40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm complete all as specified and as directed by the Engineer in charge (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)
M&L RCC work as in columns, beams, slabs, chajja, railing in M-25 (Design Mix) using 20 mm nominal size crushed stone aggregate all as specified and as directed.
Use & waste special water tight centering and shuttering including bolting, strutting, propping so as to withstand a pressure of 0.1 Mpa including removal of form work all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water and removing debris outside MD land (from ground floor to fourth storeys bldgs) including use of scaffoldings all as specified and directed.
M&L for 15mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, (upto 05 storeys of bldgs) including use of scaffolding all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.
Supply only liquid water proofing compound.
M&L removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof, parapet walls near pipes and applying acid after removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick cement plaster in CM(1:3), size of disturbed portion not execeeding 150mm X150mm X 200mm all as specified and directed.
M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height all as specified and directed. Make: Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or Nerolac perma SBR latex
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises all as specified and directed.
M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles all as specified and directed.
M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.
M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.
M&L digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders) such as skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Note:- Rate of Designer border in vertical surface will be deemed into quoted rates.
M&L machine cut kota stone slab frooring 20-25 thick laid over 15 mm thick screeed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.
All as per item No 21 above but in riser of steps, skirting, dado and pillars laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.
M&L Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : Somany Pilkington / Orient bell / Kajaria.
All as per item No 22 above but in vertical surfaces
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.
M&L granite (of any colour) 18-20 mm thick machine cut, pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring, window cill, wall cladding including 20 mm thick screed bedding in cement mortar 1: 6 all as specified and directed.
Taking up or down 15 mm bore steel tubing and connection including cleaning for refixing or removed to store all as specified and directed
Taking up or down 20 mm bore steel tubing and connection including cleaning for refixing or removed to store all as specified and directed
Taking up or down 40 mm bore steel tubing and connection including cleaning for refixing or removal to store all as specified and directed
Fixing only old 15 mm bore steel tubing including cleaning in positon (walls, ceiling and floor all as specified and directed
Fixing only old 20 mm bore steel tubing including cleaning in positon (walls, ceiling and floor all as specified and directed
S&F GI tubing 15mm bore medium grade with all fittings and fixtures complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik
S&F GI tubing 20 mm bore medium grade with all fittings and fixtures complete to wall and ceilingor laid in floors all as specified and directed. Make: Jindal / Tata / Swastik
S&F GI tubing 40mm bore medium grade with all fittings and fixtures complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik
Cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting nexc. 10cm girth all as specified and directed.
S&F in repairs Vitreous China wash basin, wliile, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets other necessary fittings all as specified and directed.
S&F 15 mm bore fancy type chromium plated long body bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule all as specified and as directed. Make Jaquar Cat Part No -CON-107KN/Cera or Equivqlent.
S&F in repairs 15 mm bore Brass chromium plated shower rose 125 mm size including shower arm 200 mm long (stainless steel) square shape with wall flange all as specified & directed.
S&F in repairs vitreous China squatting pan, ' Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cisteren and flush pipe) all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Parryware.
S&F in repairs 10 litres capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Parryware.
S&F PVC connection 15mm size PTMT nuts of length 450 mm all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges all as specified and directed. Make Jaquar Cat Part No -ACN 1111SM /Cera or Equivqlent make
S&F in repairs CP soap dish all as per cat part all as specified and directed.
S&F in repairs 15 mm bore chromium plated Angular stop valve with wall flange of cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed. Make Jaquar Cat Part No -CON - 059KN/Cera or Equalent make.
S&F in repairs 15 mm bore concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed .
S&F in repairs 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts all as specified and directed
S&F PVC (SWR) floor trap with grating including jointing with solvent cement, 75mm diameter of outlet all as specified and directed.
S&F in repairs sink made of stainless steel sink with draining board made out of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm waste fitting overall size 915x460mm with bowl size 410x 330x160 mm all as specified and as directed.
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified and directed.
Demolition of Cement concrete (reinforced) of any description and in any position not otherwise specifically provided all as specified and directed.
M&L PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggegate) in foundation filling and mass concrete all as specified and directed.
M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in roof, kerbs or mud stop rounded or chamfered edges all as specified and directed.
M&L for repairs to sunken portion of slab.Treatment of sunken floor slab compraises of the following specifications :- (i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick average PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout (ii) Rendering of uneven surfaces with 6mm thick in CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out. (WPC shall be measured & paid separately) (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty . (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating with DR. FixiT Pidicrete URP with cement Ratio 1:1.5 as per manufacturs instruction to bottom and vertical sides up to finished floor level +100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) Plaster the bottom and sides up to full height of sunken with minimum 20mm thick CM 1:4 mixed with integral water proofing compound (DR. Fixit Pidifin 2K) 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured & paid separately) (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all around after painting with anti corrosive paint Note 1 :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in the presence of reps of MES and record for each sunken slab shall be maintained. Cost of testing is included in the rates quoted above. For the purpose of payment area of bottom and sides of sunken shall be measured in sqm
S&F anodised aluminium section for doors windows, ventilator door partition including fabrication of frame, shutters and fixed with necessary lugs, cleats rollers, handles, locking arrangement including all necessary accessories such as glazing clips, provn of AC opening and rubber beading for fixing glass beading for fixing glass panes in frame all as specified and directed by Engr-in- charge. Note- (i) Glass panes will be measured and paid separetly. (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clip hinges, handle, however it will not be weighted and not paid separately. Rate quoted also includes filling the gap between window and wall with silicon. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make Hindalco/indl/Jindal or equivalent
M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.
S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) over a coat of pink primer including scafoldings of any height all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.50 sqm each all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.50 Sqm but not exc 4.0 square metre each all as specified and directed.
Taking down shutter of any description area exc 1.00 sqm but n exc 2.00 sqm each all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 all as specified and directed.
S&F second class hard wood plain, solid, straight chowkhat and frames, wrought framed, rebated on the solid rounded or chamfered, put together with glue pinned at joint all as specified and directed.
M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in hold fast , bed plates and all other similar works all as specified and directed.
S&F mild steel work in hold fast, wall ties, pintle hinges and all other similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.
S&F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face venners fitted to chowkhats all as specified and directed.
S&F 100 mm size butt hinges, heavy weight, cold rolled mild steel all as specified and directed.
S&F aluminium anodised 150 mm barrel tower bolts of extruded section all as specified and directed.
S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate all as specified and directed.
S&F 200 mm length aluminium anodised barrel tower bolt extruded section all as specified and directed.
S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.
S&F 150 mm long aluminium handles, cast type, anodised all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed. Make : Asian - Apcolite or Berger- Luxol
S&F in repairs 20 mm dia decorative fancy type SS curtain rods and all other connected works all as specified and directed.
S&F in repairs 20 mm dia decorative fancy type SS curtain rod brackets all as specified and directed.
S&F 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century
S&F 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century
S&F in repairs of stainless steel cabinet / drawers handle having a length of 250mm and shape all as specified and directed.
Demolition and breaking up drain pipes 100mm dia (Salt glazed stone stone ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed.
Demolition and breaking up drain pipes 75 mm dia (Salt glazed stone ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls all as specified and directed. Note : The aboe item inculde upto any height of builidng including necessary scafolding
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls all as specified and directed. Note : The aboe item inculde upto any height of builidng including necessary scafolding
S&F 75mm dia PVC (SWR) bends all as specified and directed.
All as item No 85 above but with access door
S&F 110 mm dia PVC (SWR) bends all as specified and directed.
All as per item No 88 above but with access door
S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed.
S&F 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed.
S&F 110mm dia PVC (SWR) vent cowl all as specified and directed..
Dismantling Asbestos sheeting/fibre of any type & any gauge, thickness of roof coverings including scafoldings of any height all as specified and directed.
Dismantling of framed work of timber in scantlings 40 sq. cm and over in section, in any position all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tile profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain sheet, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm & 1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
S&F joist, channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates, etc. Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. Make:-Asian/ Berger
M&L for disconnecting existing tanks capacity exc 1000 & n.exc 2000 litre, setting aside( or lowering if required) for repair cleaning etc and hoisting if required reconnecting and refixing in position all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified and directed. Make : Asian - Tractor or Berger- Bison.
M&L for preparation of old plastered ceiling over two coats of white wash all as specified and directed.
M&L for preparation of old plastered wall surfaces and applying over two coats of white wash all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint at any height including use of scaffolding wherever required for external painting of wooden surfaces all as specified and directed.
SHREE JAGDISH FURNITURE CO.
SHRI SAI ENTERPRISES
SN CONSTRUCTION
Bidder Name
Unity Enterprises
SN CONSTRUCTION
SHRI SAI ENTERPRISES
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .