Annual Rate Contract for Welding, cutting threading and other works under Division Sardarshahar

Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern's store own his cost.

80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concern's store own his cost.

At Workshop

On Site

Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.

Up to 12 mm) dia. Hole

Above 12 mm dia. Hole.

Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes.

Sluice Valve Size 80mm

Sluice Valve Size 100mm

Sluice Valve Size 125mm

Sluice Valve Size 150mm

Sluice Valve Size 200mm

Sluice Valve Size 250mm

Sluice Valve Size 300mm

Sluice Valve Size 350mm

Sluice Valve Size 80mm

Sluice Valve Size 100mm

Sluice Valve Size 125mm

Sluice Valve Size 150mm

Sluice Valve Size 200mm

Sluice Valve Size 250mm

Sluice Valve Size 300mm

Sluice Valve Size 350mm

Sluice Valve Size 80mm

Sluice Valve Size 100mm

Sluice Valve Size 125mm

Sluice Valve Size 150mm

Sluice Valve Size 200mm

Sluice Valve Size 250mm

Sluice Valve Size 300mm

Supplying of MS Rods and Chuck Nut (Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes.

Sluice Valve Size 80mm

Sluice Valve Size 100mm

Sluice Valve Size 125mm

Sluice Valve Size 150mm

Sluice Valve Size 200mm

Sluice Valve Size 250mm

Sluice Valve Size 300mm

Sluice Valve Size 350mm

2" dia. Size (50 mm)

2 ½" size (65 mm)

3" dia size (80 mm)

4" dia size (100 mm)

Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm).

2x2 ½ “ dia size (50 x 65 mm)

2 ½ “x 3” dia size (65 x 80 mm)

2”x 3” dia size (50 x 80 mm)

3”x 4” dia size (80 x 100 mm)

Please Enable Macros to View BoQ information