Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.1 LAccepted-AOC | L1 | Accepted-AOC Being Lowest bidder | |
| 2 | L2₹28.2 L+₹87,302.50 (3.19%)Rejected-Finance 300 PREM BASTI 10 SANGRUR SANGRUR PUNJAB 148001 | SANGRUR | PUNJAB | 148001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹32.6 L+₹5.2 L (19.2%)Rejected-Finance ASTBAL MOHALLA BANASAR BAGH ROAD PATIALA GATE SANGRUR 148001 | SANGRUR | SANGRUR | PUNJAB | 148001 | L3 | Rejected-Finance Being L3 |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Himanshu, IDSE
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH TARAPORE ENCLAVE PATIALA CANTT
As per tender documents
2023_MES_597184_1
GE(S)/PAT/T-19/S/2023-24
Open Tender
Civil Works
Item Rate
180 days
Mil Stn Sangrur
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (South) Patiala
₹70,000
Yes
6 Sept 2023
20 May 2023
17 Jun 2023
20 May 2023
15 Jun 2023
2 Jun 2023
20 May 2023 - 26 May 2023
Amount
Dismantling of brick work including all quoins arches pillars etc built in cement mortar complete all as specified and directed by Engr-in-Charge.
M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed by Engr-in-Charge.
All as per Ser item No. 02 above but using old bricks complete all as specified and directed by Engr-in-Charge.
Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engr-in-Charge.
Demolition of mud phuska, in roof any thickness including leeping plastering (whether full, thickness removed or only a part thereof) complete all as specified and directed by Engr-in-Charge.
Scraping surfaces of roof by wire brushing removing all loose dirt and cleaning and wahsing down the surfaces with water complete all as specified and directed by Engr-in-Charge.
M&L for Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per square meter including cleaning the surface complete all as specified and directed by Engr-in-Charge.
PCC 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 , complete all as specified and directed by Engr-in-Charge.
Applying membrane on primed surface by press application method with minimum 75mm longitudinal wise lap and 100mm over lap on the transverse direction duly sticked using APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.00 Kg/Sqm water proofing membrane, black finished non woven polyester reinforced 3mm thick complete all as specified and directed by Engr-in-Charge.
M & L plain cement concrete tiles 20-22 mm thick , type B-1 type (1:2:4) pointed in neat cement slury over 15mm thick sceed bed in CM (1:4) complete all as specified and directed by Engr-in-Charge.
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.
M & L for PCC (1:2:4) type C-2 using 20mm graded aggregate as in coping including necessary form work complete all as specified and directed by Engr-in-Charge.
Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed by Engr-in-Charge.
75 mm thick PCC (1:3:6) type C1 (using 20mm grade aggregate) as in plinth protection, finishing the surfaces even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed by Engr-in-Charge.
Glazed ceramic tiles 300 x 600mm x 7mm thick with highlighted coloured on vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match including 10mm thick rendering of CM 1:3 complete all as specified and directed by Engr-in-Charge.
Non skid ceramic jointless (coloured files) of size 400 x 400 x7mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed 15 mm thick in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.
M&L for single charge, stainfree, vetrified tiles, Premium (1st) quality straight edge, coloured tiles 600x600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as approved, in neat cement incl and over 20mm thick screed bed in CM (1:4) and pointed in white/coloured cement to match, in floors etc. complete all as specified and directed by Engr-in-Charge.
M&L for single charge, stainless, vetrified tiles, Premium (1st) quality straight edge, coloured tiles 600x100 mm and 9-10 mm thick, as in skirting/dado etc. in any pattern of light coloured tiles as approved, on vertical surfaces such as in skirting/dado etc, height not more than 150 mm, set and jointed in neat cement slurry over incl 10mm thick rendering in cement mortor (1:4) and pointed in white coloured cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.
M&L for Baroda Green marble, machine cut as in shelves/steps./cills/Jambs/skirting/border only in tiles flooring and the like works and flooring etc 15-16 mm thick incl bull-nose the exposed sides/lengths, set and jointed in cement slurry over & incl screed of 15mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs incl rubbing, cutting and mirror type granite polishing and incl dismanting/demolition complete all as specified and directed by Engr-in-Charge.
Providing machine cut Kota stone slab flooring of Size 550x550x20 mm thick laid over 20mm thick cement mortar 1:4 screed bed laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete to be fixed in any position complete all as specified and directed by Engr-in-Charge.
Same all as per ser item hereinbefore but on vertical surfaces as in skiting /dado of size 550x150x20 mm thick complete all as specified and directed by Engr-in-Charge.
Granite (of any type in two piece ) tiles 20mm thick machine cut, on kitchen platfrom bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types and laid over screed bed 15 mm thick in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.
Refixing of shutter in the same opening exc 1 sqm but not exc 2 sqm each complete all as specified and directed by Engr-in-Charge.
35mm thick plain framed (Factory made) Panelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seanoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.
S & F 100 size stainless steel butt hinges complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 150 mm Aluminium handles, cast type, anodised complete all as specified and directed by Engr-in-Charge.
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
35mm thick glazed and skeleton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.
Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf.
S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete all as specified and directed by Engr-in-Charge.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing or complete all as specified and directed by Engr-in-Charge.
Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings or complete all as specified and directed by Engr-in-Charge.
100 mm size PVC butt hinges complete all as specified and directed by Engr-in-Charge.
150MM PVC handles complete all as specified and directed by Engr-in-Charge.
200mm long PVC tower bolt complete all as specified and directed by Engr-in-Charge.
Taking down Shutter exc 1.00 Sqm and n. exc 2.00 Sqm complete all as specified and directed by Engr-in-Charge.
Factory made pressed steel frames for doors with one with one or more rebates size of frame (105 x 60 mm )including necessary fixing lugs, hinges, lock strike plate, etc.,complete as specified, supplied and fixed
Factory made pressed steel frames for doors with one with one or more rebates size of frame (125 x 60 mm )including necessary fixing lugs, hinges, lock strike plate, etc.,complete as specified, supplied and fixed.
Stainless steel gauge wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. complete all as specified and directed by Engr-in-Charge.
M&L 25mm thick PCC 1:2:4 type B1 using 12.5 mm graded stone aggregate complete all as specified and directed by Engr-in-Charge.
Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams and similar works incl provison of supports if reqd and dubbing with PCC (1 : 1.5 : 3) using 6 to 12 thick graded stone aggregate in any portion of 15mm to 50mm thick and finshing to desired shapes complete all as specified and directed by Engr-in-Charge.
Factory made steel cup board shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing or specified and directed by Engr-in-Charge.
Taking down cement plaster on walls built in cement mortar etc including racking out joints, hacking for key. Scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and smooth finish without using extra cement with WPC paid and measured separately complete all as specified and directed by Engr-in-Charge.
All as per Ser item No. 49 above but 10mm thick in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 2mm thick wall care putty on new plastered surfaces of walls including preparation of new surface complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 2mm thick wall care putty filling complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.
M & L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller complete all as specified & as directed by Engineer-in-Charge.
M & L for preparation new plastered to walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller over a coat of priming coat complete all as specified & as directed by Engineer-in-Charge.
Preparing new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engr-in-Charge.
Preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
Preparing new surface of steel material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.
Preparing old surface of steel material of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint over a coat of priming complete all as specified and directed by Engr-in-Charge.
Rotational moulded polythene three layer water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position, connecting to inlet or outlet and washout including disconnecting and demolition of existing tanks of any description complete all as specified and directed by Engr-in-Charge.
15 mm dia CP stop cock cast copper alloy fancy type with long shank and cup (concealed type) , screw down high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm dia Bib Tap cast copper alloy fancy type CP with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.
Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of 20mm having minimum weight 210gm/each fixed valve complete all as specified and directed by Engr-in-Charge.
Vitreous china squatting pan white colour of Orissa patten size 580 x 440 white with (C I P trap long size) joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in CM 1:3 complete all as specified and directed by Engr-in-Charge.
S/F in repairs low level dual flushing cistern of PVC 10 ltr capacity incl 45cm long PVC connection with brass nut at both ends, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length 20 cm with red-oxide primer complete all as specified (ISI Marked) incl taking down HL/LL flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed by Engr-in-Charge.
Brass chromium plated shower roses 50mm size with swivel joint any size fixing in repairs complete all as specified and directed by Engr-in-Charge.
S&F in repairs vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge.
S&F concealed (with long shank and cup) stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed complete all as specified and directed by Engr-in-Charge.
S&F unbreakable corner set for bath room complete all as specified and directed by Engr-in-Charge.
S&F brass chromium plated angle cock 15mm bore with crutch or butterfly handle screwed to iron pipe, fixed in repair complete all as specified and directed by Engr-in-Charge.
S&F Mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding including cutting out old damaged/inactive helical door spring complete all as specified and directed by Engr-in-Charge.
Taking up or down steel water tubing and connection 15 mm bore in pipe incl cleaning for re-fixing or removel to store complete all as specified and directed by Engr-in-Charge.
Taking up or down steel water tubing and connection 20 mm bore in pipe incl cleaning for re-fixing or removel to store complete all as specified and directed by Engr-in-Charge.
Steel water tubing 15mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed by Engr-in-Charge.
Steel water tubing 20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed by Engr-in-Charge.
Fixing only old galvanized iron pipe 15mm bore in new or old position with new fittings as in wall and ceiling or laid in floors including taking down or up as existing at site complete all as specified and directed by Engr-in-Charge.
Fixing only old galvanized iron pipe 20mm bore in new or old position with new fittings as in wall and ceiling or laid in floors including taking down or up as existing at site complete all as specified and directed by Engr-in-Charge.
S&F Stainless steel sink with drainage board1.00 mm thick for kitchen with plugs washers and waste pipe of 40mm dia PVC west pipe incl new fittings upto floor trap,CP waste fitting and including cantileversand cast brackets, connecting union, etc, overall size 915mm x460 mm with bowl size 410mm x 330mm x 160mm including making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed by Engr-in-Charge.
S&F CP towel rail 600mm long with brackets, chromium plated 20mm dia in repair complete all as specified and directed by Engr-in-Charge.
S&F in repairs CP Soap dish of size approximate size 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.
40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors, finished even & smooth surface without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L cement concrete 1:2:4 type B-1using 20mm graded stone aggregate as in holdfast blocks complete all as specified and directed by Engr-in-Charge.
Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipe) set in cement mortar/concrete 75 /110 mm dia fixed in position complete all as specified and directed by Engr-in-Charge.
Supply & fix 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engr-in-Charge.
All as per item No hereinbefore above but bore of pipe 75 mm dia fixed to walls/floor complete all as specified and directed by Engr-in-Charge.
S&F(SWR) 110mm bore pipe junction single (single T) equal and unequal with access door complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) bends 110mm bore of any radius with access door complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia complete all as specified and directed by Engr-in-Charge.
S&F of 110 dia PVC (SWR) Vent cowl complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (reinforced) other than ground floor, beams, chajja, landing etc. complete all as specified and directed by Engr-in-Charge.
Providing RCC M-25 design mix cement concrete 1:2:4 type B-1 ( 20mm graded agg ) as in chajjas landing cover slab, shelves etc and set in cement Mortar 1 : 4 complete all as specified and directed by Engr-in-Charge.
Mild steel TMT bars, 8 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete any description and any position not otherwise specifically provided (below or above ground level) complete all as specified and directed by Engr-in-Charge.
PCC 1:2:4 type B 0) using 12.5 mm graded stone aggregate 25 mm thick mixing with WPC as in bedding in sunken portions etc complete all as specified and directed by Engr-in-Charge.
Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed by Engr-in-Charge.
Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 mm micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm complete all as specified and directed by Engr-in-Charge.
Providing 40 mm dia GI pipe medium grade spouts 50 Cm long complete all as specified and directed by Engr-in-Charge.
Supply only WPC complete all as specified and directed by Engr-in-Charge.
M&L for brick work in cement mortar (1:4) using sub class 'B' bricks staight or curved on plan exc in half brick thick wall complete all as specified and directed by Engr-in-Charge.
Dismantling boarding of any description and fixed in any position fixed with nails or screws complete all as specified and directed by Engr-in-Charge.
S&F 18 mm thick 600 kg/cum LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed by Engr-in-Charge.
S&F 18 mm thick with min density 600kg/cum LEAD FREE PVC Celuka ply of single side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed by Engr-in-Charge.
S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed by Engr-in-Charge.
S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position complete all as specified and directed by Engr-in-Charge.
S&F 6 mm thick LEAD FREE PVC ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed by Engr-in-Charge.
S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr-in-Charge.
S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed by Engr-in-Charge.
S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed by Engr-in-Charge.
S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.
S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.
S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets/Cutlery etc. for kitchens of required suze complete fixed in position complete all as specified and directed by Engr-in-Charge.
S&Fstainless steel plate racks, glossy finish, for kitchen overall size 600mm x 600mm x 250mm complete fixed in position as recommended by manufacturer with SS screws/fasners complete all as specified and directed by Engr-in-Charge.
S&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete all as specified and directed by Engr-in-Charge.
M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed by Engr-in-Charge.
S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions or complete all as specified and directed by Engr-in-Charge.
S&F stainless steel tubing 202 grade of 25mm dia mild steel chromium plated 1.0mm thickness as in curtain rod complete including S&F 02 nos stainless steel brackets fency type stop etc in repairs complete all as specified and directed by Engr-in-Charge. Note :- For the purpose of measurement and payment running length of curtain rod only shall be considered.
M&L for preparation of reinforcement and apply corrosion resisting coat rust remover in two coats, suitable time to be provided between coats according to manufacturer instruction to resist further detoriation of reinforcement etc. complete all as specified and directed by Engr-in-Charge.
M&L for apply Epoxy Bonding agent (2 part solvent free epox based bonding agent) to old concrete surface / mortar before applying the plastering to the surface complete all as specified and directed by Engr-in-Charge.
Providing and laying super fluid microconcrete - roffe crete repairs (or equivalent as specified in the list of brand names) in beam bottoms, columns, slabs etc. including mixing with concrete, waterproof ply wood / steel plate shuttering, pouring, temping, consolidating, curing etc. complete as per manufacturer specification and consultants instructions or complete all as specified and directed by Engr-in-Charge. Note :- This shall be paid on actual consumption of Micro concrete
M&L for complete removal of loose / cracked concrete include reinforcement if required, from RCC roof projection chajja, fins facia, roof bands etc and making good with PCC (1:11/2:3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth without using extra cement including necessary form work and welding / binding of reinforcement (including reinforcement) if required complete and applying three coat of white wash / two coat of cement base paint to match with the existing surface complete all as specified and directed by Engr-in-Charge.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.
S&F for anodised aluminium door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc including mortice lock with minimum three sets of key complete all as specified and directed by Engr-in-Charge.
S&F in repair for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.
S&F Sheet glass 5.8 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed by Engr-in-Charge.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed aluminium grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and directed by Engr-in-Charge.
S&F in repair Stainless steel gauge wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass of any thicknesssize or description from wooden frames or metal frames fixed with wooden beads/ putty complete all as specified and directed by Engr-in-Charge.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F factory made aluminium 50 micron powder coated grill opening size 101.6X63.5mm (4"x2½") and approx weight @ 1.345kg/sqm complete fixed in position in window complete all as specified and directed by Engr-in-Charge.
AGGARWAL & CO
NARINDER KUMAR SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .