Repair and renovation of PWD Guest House atsurinsar Jammu

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area of 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Providing/Fixing of Mineral fibder-Acouslical Suspended Ceiling system with Dume(Micro look edge tile with O.E.M syinthetic exposed grid. The Arms strong due tile should have humidity Resistance (R.H) of 99%, NRC upto 0.5, light reflectance 85%.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Rose Wood Etenaty (KP2394).

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.18mm thick.

Providing and fixing aluminium works for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z section and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling upto gaps at junctions, at top, bottom and sides with required EPDM rubber / neoprene - gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whenever required including cleat angle, Aluminium snap beading, PVC/neoprene gasket etc. complete for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge with 5.50mm thick floating glass panes and PVC paneling (complete job)

Providing and laying in positioin cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level 1:4:8 (1 cement :4 fine sand :8 geaded stone aggregate 40 mm nominal size). Crushed

Providing and laying of in position cement concrete in retaining walls return walls, wall (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills, sunken floors fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing: 1 : 3 :6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) crushed.

Cement concrete pavement with 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate-20 mm nominal size) including finishing com~lete. (a) Crushed

Centring and shuttering including Strutting propping etc and removal of form work for walls any thickness.

Steel Work welded in built up sections /framed work including cutting ,hoisting , fixing in position and applaying a primng coat of approved steel primer using structural steel etc. as required. In gratings , frames, guard bar, Ladders, railings, brackets, gates &similar Works)

Providing and Fixing of Polycarbonate Sheet over the trusses on including portion of th front.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Repair of Wall PVC Panelling Damaged.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement: 4 fine sand).

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer's specifications Two or more coats on new work

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10 sqm

Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work

Fixing of Stainless Steel Alphabets with 12"x12" as on the front side of Guest House PWD (R&B) Guest House Surinsar.

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China wash basin including all connection but excl . cost of fittings with pedistal.

Providing and Fixing of flushing cistern with 5 Ltrs capacity of Hind Ware/Cirs. Etc.

Providing and Fixing Vitreous China Pedistal Type (European type) W.C With attached white vitreous China W.C.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.

15 mm dia. nominal bore

20 mm dia. nominal bore (b) Medium

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 (a) 15 mm nominal bore

Providing and Fixng of Valve 15mm.

Providing and Fixng of Valve 20mm.

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic. moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and Fixing PVC Waste Pipes 25mm.

Providing and Fixing Tank Nipple.

Engaging Carpenter for 5 days for easing of existing Door and Windwon.

TARA CHAND

Sardool Singh

M/s Andul Rashid Malik

M/S JAI DEV CONTRACTOR

M/s Amir Construction Company

balraj sharma Govt Contractor