WELCOME MAINTENANCE AND MISC REPAIR TO BUILDINGS AT AIR FORCE STATION DALHOUSIE UNDER GE AF PATHANKOT

Amount

Taking down cement plaster on brick wall including raking out joints hacking for key srcubbing down with water complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour 15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed by Engineer-in-Charge.

Material and labour 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as perIS 15489:2004, Alkali and funggal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over new surfaces in camouflaged pattern complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation new surfaces of walls and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new surfaces of ceilings and applying three coats of white wash on newly plastered surfaces of ceiling complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation of old decorated ceiling surfaces and applying two coats of Oil bound distemper over 3mm thick wall care putty complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation of old decorated wall surfaces and applying two coats of Oil bound distemper on walls over 3 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation of old decorated surfaces of walls and applying one coats of Oil bound distemper on walls complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old painted steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old painted steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying One coat of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Dismantling old Wall and ceiling boards (fiber, pulp insulation/slabs /blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

Providing and fixing ceiling at all heights with GRS (semi preforated micro 12 mm thick trangular edge GRS false ceiling tile) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiible as per IS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm ,cross T of size 15X32 mm of length 1200mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing and as per direction of the Engr- in Charge.

Taking down chowkats or frames including shutter exc 1.50Sqm but nexc 4.00Sqm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminium frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing, anodised aluminium snap beading screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5.5 mm thick tinted/plain glass for aluminium windows/doors having each pane exc 0.5 sqm incl complete fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5 mm thick plain colour pvc backelight sheet in strips channel feathered at for fixing on aluminium frame partition complete all as specified and directed by Engineer-in-Charge.

Supply and fixing galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & Fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100 mm butt hinges, heavy weight, cold rolled mild steel and fixed ccomplete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150 mm size aluminium handles, cast type,anodised complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150 mm aluminium anodised barrel tower bolts extruded section fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Material and labour for Ist class hard wood plain or solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35 mm thick plain framed panelled shutters (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

Supply and fixing glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a) complete all as specified and directed by Engineer-in-Charge.

Material and labour for two coat of Synthetic enamel paint over a coat of pink primer on new wood surface of any description not otherwise described over 10cm in width or girth including preparation of new surfaces complete all as specified and all as directed by Engineer-in-Charge.

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed by Engineer-in-Charge.

Material and labour 15mm thick screed bed or bedding layer of cement mortar 1:4 to laying floor finish complete all as specified and directed by Engineer-in-Charge.

Material and labour non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm(300mmx300mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and directed by Engineer-in-Charge.

All as per ser item No 35 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete all as specified and directed by Engineer-in-Charge.

Material and labour glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and labour for 20mm thick granite black slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking plaforms and like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantling 40 sqcm and over in section in any position complete all as specified and directed by Engineer-in-Charge.

Material and labour for hard core of guage n.exc 63mm, deposited spread and levelled in layers n. Exc 15cm thick watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for 40mm thick PCC(1:2:4) type B-1 using 20mm graded crushed stone aggregate) as in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing vitrified ceramic tiles light shade, 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

All as per ser item No 43.00 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete all as specified and directed by Engineer-in-Charge.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete all as specified and directed by Engineer-in-Charge.

Material and labour PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair single bowl sinks with drain board made of stainless steel 1mm thick kitchen with plugs, washers and waste, including bedding in cement mortar or incld fixing cantilever brackets and connecting union to pipe, overall size 915mmX460mm bowl size 410mmX330mmX160mmcomplete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC connection, 60cm long, 15mm in size with PTMT nust and PVC washers at both ends complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm Angle/stop/gate valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair brass chhromium plated tubular tower rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Stainless Steel curtain rod of 20 mm dia with Stainless Steel bracket including Cp globe at both ends for each door and window, rings and side caps for every one meter fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw including CP globe on both ends for each door and window opening complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC cabinate mirror coloured of size 350x450mm fixed with screw and PVC gutty on wall complete all as specified and directed by Engineer-in-Charge.

Dismantling cast iron work of any description complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Fe 410-W(Gde E 250)quality A rolled mild steel in roof trusses (framed) trussed, purlins, crane gantries, rails and framing (beam, tee, angle, channel or flat sections) including distance pieaces cleats complete all as specified and directed by Engineer-in-Charge.

Dismantling plain corrugated CGI/PGI sheet in roof covering incl redges complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge.

m/S Varun Gupta (BID ID -3100147)

Surya & Gautam Builders (BID ID -3122716)

Havish Construction (BID ID -3099606)

MS ROSHAN LAL THAKUR (BID ID -3102508)

Pathania Builders (BID ID -3125321)

M/s Shakti Electric Works (BID ID -3125184)

R.K.CONSTRUCTION ENGINEERS (BID ID -3113392)

Auto India (BID ID -3123721)