Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance BASEMENT PLOT NO 17 4657 21 ANSARI ROAD CENTRAL DELHI NEW DELHI 110002 | CENTRAL DELHI | DELHI | 110002 | Admitted-Finance |
Tender Value
₹48.6 L
EMD Value
₹97,220
Closing Date
18 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (South West)
GE (South West) New Delhi-03
REPAIR/ MAINT TO MANUAL/ MOTORISED ROLLING SHUTTERS, SLIDING GATES AND SENSOR DOOR AND REPAIR TO PLASTERING, WASTE/ VENT PIPE, MS PLATFORMS IN SHAFT OF D, E AND F BLOCK AT MBC (RESTRICTED AREA) UNDER GE (SOUTH WEST) NEW DELHI-03
2024_MES_647455_1
GE/SW-98/2023-24
Limited
Miscellaneous Works
Item Rate
330 days
GE (South West) New Delhi
Class D Category a(i) and b(i)
7 documents required · 7 mandatory
₹500
GE (South West) New Delhi
₹97,220
Yes
22 Apr 2024
27 Mar 2024
20 Apr 2024
27 Mar 2024
18 Apr 2024
11 Apr 2024
Amount
Attending complaint, inspection, oiling, greasing and rectifying breakdown of manual operated rolling shutters, motorised operated rolling shutters, main motorised sliding gate and manual sliding gates to check the serviceability and replacement of any parts related to breakdown within 08 Hours after intimating complaint telephonically/ verbally including Saturday/ Sunday and Holidays complete all as specified and as directed. Notes:- (i) T&P items, any other minor parts, greasing, oiling, welding and cleaning of shutter and surrounding shall deemed to be included in the quoted rate. (ii) Major items/parts to be replaced shall be measured and paid as "supply only" under respective item of this schedule. (iii) Adequate tradesman /supporting manpower shall be deployed by contractor with mobile phone and they shall be present on all days including Saturdays, Sundays and holidays for maintenance of above mentioned work. The supervisor of the contractor shall obtain detailed instructions from concerned AGE/JE every morning for attending complaints on daily basis. The persons shall be detailed by AGE/JE concerned every morning for attending complaints on daily basis. (iv) The complaints shall be attended within 08 Hours. If complaints shall not attended as per schedule, a penalty of Rs.500/- shall be imposed on contractor for each complaint for each day.
Notes (Contd...):- (v) Any delay in non-completion of complaints shall immediately be communicated to AGE/JE. (vi) Complaint register & complaints slips shall be maintained by the contractor rep. After completion of complaint the rep of contractor shall obtained feedback and signature of user. Payment against these items shall be made only after due verification of complaint register & complaint slips by JE & Engr-in-Charge. (vi) All tradesmen shall wear proper uniform, failing which a recovery of Rs 200/- per shift per person shall be recovered from the contractor's dues. (vii) The payment of contractor's employee shall be made through nationalized bank account of individual and the proof of transaction and the contractor shall submit the same with bank account pass book of individual within 15 days of acceptance otherwise a recovery shall be made a sum of Rs 200/- per shift per employee from the contractor's dues.
Supply only in replacement bevel gear box as per existing make and size heavy duty suitable for geared rolling shutter up to 25 Sqm complete all as specified and as directed.
Supply only in replacement helical spring made out of high tensile steel wire, factory made as per existing make, model and size, suitable for any size of rolling shutter complete all as specified and as directed.
Supply only in replacement MS coupling male and female duly bore with key and key slot and nut & bolt with washer (as per existing) suitable for any size of rolling shutter complete all as specified and as directed.
Supply only in replacement MS rubberized top wheels including ball bearing for main sliding gate as per existing shape and size, suitable for any size of rolling shutter complete all as specified and as directed.
Supply only in replacement steel rack and pinion gear having 25 teeth welded with shaft and pinion as per existing make, model, size and shape, suitable for any size of rolling shutter complete all as specified and as directed.
Supply, installation and testing in replacement manual gear boxes, upper and lower with chain wheel and handle chain up to 6mtr long MS rod for operating rolling shutter, manual type complete including replacement of all consumables items such as bearing, gear wheel, nuts, bolts etc complete all as specified and as directed.
Taking down the existing old unserviceable rolling shutter any size, motorized operated including side rails, top cover motor etc and Supply, installation, testing and commissioning in replacement, new rolling shutter made out of 1.25 mm (18 SWG thick) MS Laths/side guides made out of 100 X 25 X 3.15mm MS section/bottom lock plate made out of 2.50mm MS stripes with MS angle iron of size 35 X 35 X 5 mm at the bottom/top brackets made out of 5mm thick MS plate/main top/shaft made out of heavy duty MS seamless pipe (without springs) duly covered with top cover made out of 20 SWG thick joint less GI sheet and all accessories duly painted with two coat of synthetic enamel paint of approved shade over and including a coat of red oxide zinc chromate primer all as per standard engineer practice/ site requirement, gear operated type with chain wheel and hand chain including making goods to all disturbed surface complete all as specified and as directed. Note:- (a) The cost of transportation of rolling shutter from factory to site shall deemed to be included in the unit rate of item. (b) The rates are included for demolition and cement/concrete/brick work which is required at site for replacement of rolling shutter.
All as per item No 8.00 here in before but manual operated rolling shutter complete all as specified and as directed.
S&F as in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.
M&L for preparation of old steel surface including scrapping down existing paint on rolling shutter and re-painting of rolling shutter with two coat of synthetic enamel paint complete all as specified and as directed.
M&L for taking out MS sliding gate up to 7.3 metre long and 2.3 metre high and removing the unserviceable running wheel 05 Nos at top rubberised roller consisting bearing 38 Nos and bottom roller 02 Nos etc and Supply, fixing and installation of new running wheel 05Nos, top small roller 38 Nos and bottom roller 02 Nos including and re-installation of existing sliding gate including painting of gate with two coats of existing colour and making good to disturbed surfaces and servicing/repair of existing gear box and motor in authorised work shop including applying grease on all movable parts complete all as specified and as directed. Notes:- (a) Contractor is advised to visit the site before quoting the rate. (b) Rates quoted by the contractor shall deemed o be inclusive of all minor parts, Nuts, bolts and washers of any size & other consumable items costing up Rs 1500/- and transportation, T&P etc complete.
M&L two coats of Aluminium paint on old painted surface of rolling shutter of any description over 10 cm in width or girth over one coat of aluminium red oxide primer after complete removal of existing treatment complete all as specified.
Attending complaint, inspection and rectifying breakdown of sensor operated glass door shutters (12 Nos) including complete servicing of main motorised sliding gate to check the serviceability and replacement of any parts by carrying out one visit per month or on any breakdown within 08 Hours after intimating complaint telephonically/ verbally including Saturday/ Sunday and Holidays by authorised company technician complete all as specified and as directed. Notes:- (i) T&P items, any other minor parts, greasing, oiling, welding and cleaning of shutter and surrounding shall deemed to be included in the quoted rate. (ii) Major items/parts to be replaced shall be measured and paid as "supply only" under respective item of this schedule. (iii) The complaints shall be attended within 08 Hours. If complaints shall not attended as per schedule, a penalty of Rs.500/- shall be imposed on contractor for each complaint for each day. (iv) Any delay in non-completion of complaints shall immediately be communicated to AGE/JE.
Supply only motor for sensor door, Make- Ozone
Supply only intelligent controller suitable for door shutter upto 120 Kg model
Supply only Hanger roller suitable for 12mm thick toughned glass door Make- Ozone
Supply only belt pully suitable for 12mm thick toughned glass door Make- Ozone
Supply only stopper suitable for 12mm thick toughned glass door Make- Ozone
Supply only belt connector, Make-Ozone
Supply only microwave sensor, Ozom-AC-99 STD Black
Supply Floor guide for frame less glass doormodel No OZOM-FG-11 of Ozone
Supply only glass door lock with strike boxmodel No OPL-4A/4B-N STD SS of Ozone
Supply, Fixing & install in replacement central geared electric motor 3 phase , 415 Volt, AC 50 Hz supply having suitable capacity of maximum lifting weight upto 1500 kgs with built in reduction gear and limit switch operating by means of operated switch incl cable etc. suitable for rolling shutter of size from 12 Sqmtr to 25 Sqmtr, complete all as specified and directed. MAKE : TATA/STRONG LIFE/FAAC
Supply, Fixing & install in replacement central geared elect motor 3 phase , 415 Volt, AC 50 Hz supply having suitable capacity of maximum lifting weight upto 800 kgs with built in reduction gear and limit switch operating by means of operated switch incl cable etc. suitable for rolling shutter of size from upto 12 Sqmtr complete all as specified and directed. MAKE : TATA/STRONG LIFE/FAAC
Supply, Fixing & install in replacement central geared elect motor 3 phase , 415 Volt, AC 50 Hz supply having suitable capacity of maximum lifting weight upto 600 kgs with built in reduction gear and limit switch operating by means of operated switch incl cable etc. suitable for rolling shutter of size from upto 12 Sqmtr complete all as specified and directed. MAKE : TATA/STRONG LIFE/FAAC
Supply, Fixing & install in replacement limit switch, lever operated, 230 volts, 10 Amp rated capacity having 1 No + 1 NC connector suitable for any size of rolling shutter complete all as specified and directed.
Dismantling and taking down the unserviceable elect motor 3 HP, 415 volt AC supply from MS wall mounted frame of rolling shutters, carrying to the authorised workshop and rewinding the same with super enamelled copper winding wire as per existing gauge incl varnishing etc. and refitting at site to rolling shutter frame at its original position incl testing on load all as per site requirement complete all as specified and directed.
S&F in replacement of unserviceable key type three step (Up, Down and stop) switch to operate any size of rolling shutter by electrically as per existing make & model complete all as specified and directed.
M&L for replacement of sub main wiring with 2x 4 sqmm, single core , multi stranded copper conductor FRLS PVC insulated and sheathed cable 1100 Volts grade , in and including PVC conduit recessed in walls and on surface at RCC portions etc including 4 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for AC/power point including driling holes including taking down old and making good to disturbed surface. Make :- Havells/ Finolex/Polycab. Note: Two run of cable and earth conductor be measured as one length.
M&L for replacement of MCB, SPN, 240 Volts, 6-32 Amps complete all as specified. Make- Havells/Legrand/L&T
S&F in replacement factory made, sheet steel metal enclosure for 32 Amp SPN MCB complete all as specified and directed. Make :- Legrand/Havells/L&T.
Demolition of cement concrete (reinforced) of any description & in any position of manhole / drain cover slabs etc complete all as specified and as directed.
S&F 75mm thick SFRC manhole cover slabs medium duty with frame of shape & size as required at site complete all as specified and as directed.
Demolition of brick work built in cement mortar complete all as specified and as directed.
M&L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 4 complete all as specified and as directed.
M&L for Brickwork with sub-class‘B’ bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.
M&L for chipping of spalled/loose concrete of RCC columns, beams, slabs etc and the like as directed, roughening and cleaning concrete surface with steel wire brushes, washing with water and allowed to dry including de-rusting of corroded reinforcement by using antirust chemical of Fosroc or Sika or equivalent as approved by GE and then applying Zinc rich epoxy primer over exposed old reinforcement of Fosroc or Sika or equivalent as approved by GE and then applying 40mm thick (avg thickness) guniting (mix using 1 part of Cement OPC 53 grade and 2 part of the Ghaggar / Badarpur sand mixed with water proofing compound) at the rate as directed with a pressure of 2 to 2.5 Kg/ Cm2 by guniting machine over and including the steel welded mesh 75mm x 75mm x 3mm and surface finished even & fair including necessary steel scaffolding & formwork as required in 11 storied building complete all as specified and as directed. Note: Rate of steel welded mesh & water proofing compound shall deemed to be included in the rates quoted by the contractor.
Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1 : 6 on brick work or on concrete surfaces finished fair and even without using extra cement complete all as specified and as directed.
M&L for 15 mm thick rendering on brick wall in cement mortar 1:4 finished even and fair including mixing of water proofing compound as per manufacturers instruction complete all as specified and directed. (Note: WPC shall be measured & paid separately under respective item of this Schedule.)
Supply only Liquid water proofing compound (ISI marked) complete all as specified and as directed.
M&L for applying two coats of oil bound emulsion distemper over and including a coat of primer over and including 3mm thick putty including preparation of new plastered surfaces complete all as specified & as directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over & including a coat of 3mm thick wall care putty on new plastered surfaces etc all specified on external surfaces.
Dismantling wrought iron or mild steel work of any description and in any position not otherwise provided for complete all as specified and as directed.
S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed.
S&F MS plates 8 to 10 mm thick (plain or chequered), channel, square, cut or notched (orindary and counter sunk) with riveted, bolted or welded attachment etc Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed.
S&F mild steel work as in grills/ grating, gates etc end of bars shouldered and/ or rivated or forged into spikes, framed guard bars, barred iron doors, ladders frame balusters, walk ways railing, framework of water tank and similar work complete all as specified and as directed.
M&L for cutting holes in brick walls built in cement mortar or cement lime mortar exc. half brick thick but not exc. one brick thick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.
M&L preparation of new steel surfaces of any description over 10 cm in width or girth , not otherwise described and applying two coat of synthetic enamel paint over and including a coat of red oxide or Zinc Chromate primer complete all as specified.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for 100 mm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregates) in floors complete all as specified and as directed.
Taking up or down 40 to 50mm bore steel tubing and connections, including removal from site complete all as specified and as directed.
Taking up or down 20mm bore steel tubing and connections, including removal from site complete all as specified and as directed.
Supplying and laying 50mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including suitable CPVC clamp & connecting with inlet & outlet pipe with required size of brass threaded fitting/ reducer/ connector complete all as specified. complete all as specified and directed.
Supplying and laying 40mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including suitable CPVC clamp & connecting with inlet & outlet pipe with required size of brass threaded fitting/ reducer/ connector etc complete all as specified and directed.
Supplying and laying 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including suitable CPVC clamp & connecting with inlet & outlet pipe with required size of brass threaded fitting/ reducer/ connector complete all as specified. complete all as specified and directed.
S&F in replacement 25mm outer bore CPVC gate valves (brass insert) as per requirement of site complete all as specified and as directed.
Taking down eaves gutters, rain water or PVC sewage pipe (any size or pattern) including all fittings including cleaning for re-fixing or removal from site (Measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointing with solvant cement or adhesive fixed to walls with PVC clamps complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointing with solvant cement or adhesive fixed to walls with PVC clamps complete all as specified and directed.
S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door including fixing to pipe with solvant cement or adhesive complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door including fixing to pipe with solvant cement or adhesive complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door including fixing to pipe with solvant cement or adhesive complete all as specified and as directed.
M&L cleaning and removal of mud / silt, plastic waste, poly packs and foreign material accumulated in the strom water drain/culvert upto 1.50 metre depth around the peripfery of Cab Sectt Building permises and inside the main building by manual or mechanical means & disposal of the waste material outside the building premises in the MCD low lying area by private vehicle as and when directed complete all as specified and directed.
M&L PCC 1:2:4 type B-1 mix using 20mm graded stone aggregate as in coping including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work etc complete all as specified.
S&F as in repair powder coated aluminium window using 63mm X 38mm X 1.6mm chowkhats with 45mm X 45mm X 1.6mm openable section as in shutter including 4.00mm thick glass panes of approved make with aluminium beading & rubber packing for fixing glass and including builder hardware such as aluminium handles 100mm - 02 Nos, tower bolts 100mm 02 Nos, hooks and eye - 02 Nos, 150mm, butt hinges 100mm 04 Nos etc complete all as specified and as directed. (Make of glass- Modi float/Atul) Note: The window to be fixed to wall after making good the cill & jambs (necessary plastering to wall & ceiling & PCC/Plastering at cill) & finishing the surface to match the existing & rubber packing around the outer frame of window. Existing window will be taking down alongwith builder hardware fitting & MS grill. The rate deemed to be included in unit rate quoted.
S&F as in repair powder coated aluminium fixed window/ partition of approved design using 63 mm x 38mm x 1.6mm frame work with 4.0 mm fixed thick glass including aluminium beading & rubber packing for fixing glass, area of each panel not exc 1.20 sqm complete all as specified and as directed. Note: The window to be fixed to wall after making good the cill & jambs (necessary plastering to wall & ceiling & PCC/Plastering at cill) & finishing the surface to match the existing & rubber packing around the outer frame of window. Existing window will be taking down alongwith builder hardware fitting & MS grill. The rate deemed to be included in unit rate quoted.
M&L machine cut granite stone slab 20mm thick dressed true and square, in one length not less than opening size in Door/ window in jambs & cill & length will be as per the length of cill & jamb of Door/windows), etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in mortar & over & including cement screed base 20mm thick in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture ofpigment to match with shade of granite slab including rubbing and mirror polishing and moulding all as directed by Engr-in-Charge.
VINAY ENTERPRISES
JIWAN DASS THAREJA AND SONS
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .