Loading
Loading…
Loading…
Tender ID
Tender Value
₹6.8 Cr
EMD Value
₹4.9 L
Closing Date
18 Mar 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
S AND T
14 conditions · 2 needing a document upload
For works amounting Rs.50 lakhs and above: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any Work of supply and installation of Train indication board/coach guidance system/ PA system/ Clock/IPIS/ Touch Screen enquiry system/Display board.
9 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII, IX, XI, VIA, VIB, VI and Annexure-V and Annexure- V(A) of GCC-2022 respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
1. Tenderer must understand the work before quoting. Submission of tender shall be deemed to have been done after careful study and examination of papers as well as work site and understanding of the implication thereof. 2. Quoted rates shall include all types of taxes (including GST), duties, carrying cost of all materials for the work including loading unloading involved in the concerned work. 3. All the supply materials to be deposited at the store of SSE/Tele/Store/ASN. 4. All material supplied by Railway as well as those supplied by the contractor have to be transported from the store of SSE/Tele/Store/ASN to the site of work by the contractor's own arrangement. 5. All released materials as well as any leftover material intact will have to be transported from the site back to the office of the SSE/Tele/Store/ASN by contractor's own arrangement. 6. Any consumables which is required for execution of the work, not mentioned in this schedule as Rly. supply, contractor has to arrange for the same as per advice of Site Engineer. 7. Items supplied by the contractor will be inspected by the authorized representative of Sr. DSTE/ASN or RDSO/RITES as mentioned in schedule of work. Cost of inspection is as applicable. 8.Contractor have to submit indemnity bond for safe custody and protection of railway materials during transportation (sample may be collected from office) 9. Work to be done as per advice of site engineer.
10.The Contractor & his supervisors, staff must take proper precaution during working in Railway area to prevent any interference with existing Rly. system, working & passengers. 11. Care should be taken to avoid damage to existing gears during the work. Any damages to the Railway property shall be made good by the contractor in his own cost. 12. Payment shall be made as per extant works contract procedure based on actual work done. 13. Latest guideline of Railway Bd.'s vide letter no. 2018/CE-I/CT/9 dated 04.06.2018 regarding "Letter of Credit" as Mode of payment in Works Tenders or Service Tenders is attached in pdf file. 14. An Eastern Railway Guidelines (ER cable cut JPO) for protection of cables while digging work in the vicinity of underground Signalling, Electrical & Telecommunication cable (ER letter No.SG.224/13/0, dt.12.08.2024) has been finalised. Accordingly, while working near underground Signalling, Electrical & Telecommunication cable, proper care should be taken to avoid the cable cut, other wise the penalty amount as per Railway Guidelines will be recovered from the erring contractors. 15) PVC clause shall be applicable only in tender having advertised value above Rs.2 Crore vide Railway Bd,s letter no. 2022/CEI/ CT/GCC-2022/Policy, dated 14.07.2022.
Asansol Division: Provision of IPIS based TIB/CIB display System at various station having mail/Exp. Stoppage over Asansol Division.
49-SDSTE-ASN-2025-26
49-SDSTE-ASN-2025-26
Open
Works - General
18 Months
Paschim Bardhaman, West Bengal
₹0
₹4.9 L
18 Mar 2026
23 Feb 2026
4 Mar 2026
114 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 6,76,56,771.35 | ||
| — | 696.00 | — | — | ||
| — | — | — | 1,88,80,684.32 | ||
| — | :- Supply be procured | of Double Faced Version- 2.0 with Amendment from RDSO Developmental | Boards accessories. | ||
| — | 390.00 | — | — | ||
| Installation & commissioning of Double Faced Coach Guidance Display Boards in open area This includes all required accessories including hanging structure, pole and fixing arrangements to commissioning the item. Rain hood/sun guard should be provided in open area for display boards. This also includes 100 mm dia & 15 feet long GI Pipe to be erected with concrete foundation (1:3:6) of 3 feet deep from PF Level & on the pipe, an angle to be to be fixed on GI pipe as per site condition. contractor have to supply all required materials with GI pipe & GI sheet of 2'x3' which should be placed on the top of the board in open space as per instruction of site engineer with angle fastening & crow guard (GI pipe supply included in this). | — | — | — | 26,19,435 | |
| — | 306.00 | — | — | ||
| Installation & commissioning of Double Faced Coach Guidance Display Boards in shade area. This includes all required accessories required including hanging structure for fixing arrangements to commissioning the item as per instruction of site engineer | — | — | — | 10,08,946.26 | |
| — | 22.00 | — | — | ||
| Supply of Platform Data controller (PDC) as per RDSO/SPN/TC/108/2019, Version- 2.0 with Amendment No. 1 or latest with all accessories. Note: materials are to be procurred from RDSO Developmental Vendors. Inspection: RDSO | — | — | — | 7,43,775.78 | |
| — | 22.00 | — | — | ||
| Installation & commissioning of Platform Data controller (PDC) as per RDSO/SPN/TC/108/2019, Version- 2.0 with Amendment No. 1 or latest with all accessories as per instruction of site engineer | — | — | — | 64,043.98 | |
| — | 7.00 | — | — | ||
| Supply of Central Data controller. (a) Supply of fully central data controller with all relevent software & including driving software also (TIB, CGS & auto announcement system) for IPIS System as per RDSO/SPN/TC/108/2019, Version- 2.0 with Amendment No. 1 or latest with all hardware accessories. The Central Data controller (CDC) shall consist of two CPUs (PCs) in redundant mode connected through an CDS for data synchronization, one 17" (minimum) Colour monitor to be connected through a Keyboard-Video-Mouse (KVM), speaker and microphone for live announcement. This also includes supply & installation of S/W for Auto announcement system with necessary interface & announcement recordings (Hindi/Englis/Bengali) fresh studio copy of voice files. This also includes supply of Central Data Switch (CDS) with Minimum 4 X SFP (optical) ports & minimum 8 LAN (copper) ports La yer 3 switch. CDS shall be of industrial grade & reputed make like HP, CISCO, Juniper, Brocade, IBM, Alcatel, Lucent, Avaya, Netgear, D-link, Moxa, Phoenix Contact etc. Note materials are to be procurred from RDSO Developmental Vendors. Inspection: RDSO | — | — | — | 34,85,704.6 | |
| — | 7.00 | — | — | ||
| Installation, testing & commissioning of Central Data controller as per RDSO/SPN/TC/108/2019, Version- 2.0 with Amendment No. 1 or latest as per site engineer's instruction. All fixing matrials to be arranged b y contractor. | — | — | — | 83,817.65 | |
| — | 14.00 | — | — | ||
| Supply of 3 line single side At a glance display board (AGDB) with all accessories as per RDSO/SPN/TC/108/2019, Version- 2.0 with Amendment No. 1 or latest . Note materials are to be procurred from RDSO Developmental Vendors. Inspection: RDSO | — | — | — | 66,01,582.68 | |
| — | 14.00 | — | — | ||
| Installation, testing & commissioning of 3 line single side At a glance display board (AGDB) as per site engineer's instruction. All fixing matrials to be arranged b y contractor. | — | — | — | 2,01,571.3 | |
| — | 44.00 | — | — | ||
| Supply of Single line double faced Train Arrival/Departure Display Boards as per RDSO/SPN/TC/108/2019, Version- 2.0 with Amendment No. 1 or latest with all accessories. Note: materials are to be procurred from RDSO Developmental Vendors. Inspection: RDSO | — | — | — | 1,05,54,868.28 | |
| — | 44.00 | — | — | ||
| Installation, testing & commissioning of Single line double faced Train arrival/Departure Display board. This includes all required accessories including hanging structure for fixing arrangements to commissioning the item as per site engineer's instruction. | — | — | — | 7,03,219.44 | |
| — | 7.00 | — | — | ||
| Supply of 5 Line multiline Train Information display Board as per RDSO/SPN/TC/108/2019, Version- 2.0 with Amendment No. 1 or latest with all accessories. Note: materials are to be procurred from RDSO Developmental Vendors. Inspection: RDSO | — | — | — | 28,83,830.32 | |
| — | 7.00 | — | — | ||
| Installation, testing & commissioning of 5 Line multiline Train Information display Board as per RDSO/SPN/TC/108/2019, Version- 2.0 with Amendment No. 1 or latest as per site engineer's instruction . This includes all accessories, fixtures required for commissioning of the multiline train display board. | — | — | — | 1,56,539.18 | |
| — | 12000.00 | — | — | ||
| Supply of power cable 3 Core copper (PVC insulated flexible 3 core x 2.5 sq mm multi strand power cables should conform to specification no. IS: 694:1990 reaffirmed 1995 or latest.) Make: Delton /Finolex or similar, Inspection: Consignee | — | — | — | 13,14,600 | |
| — | 12000.00 | — | — | ||
| Supply of FR CAT-6 UTP Cable suitable for 10BASE-T/100BASETX/and 1000BASE-T (Gigabit Ethernet), 4-pair unshielded twisted pair (UTP) cable, FR PVC Jacket, High Density Polyethylene insulation, 23 AWG solid copper conductor for superior conductivity, Conductor diameter: 0.57 mm (23 AWG), supports Gigabit Ethernet (1000 Base-T) standard, Make - Molex/DLINK/similar, Inspection: Consignee. | — | — | — | 2,28,000 | |
| — | 25000.00 | — | — | ||
| Running, laying of power cable/data cable/cat-6 cable through pvc pipes as per site engineer's instruction. All fixing material to be arranged by contractor. | — | — | — | 2,76,750 | |
| — | 24300.00 | — | — | ||
| Supply of flame retardent PVC conduit pipe (lSl Mark), 25mmx1.5mm, This includes all required fixing materials such as screws, nut & bolts, washers,clamps, elbow, Tee, etc make: Anchor/AKG/Precision/Polycab/similar. Inspection: Consignee. | — | — | — | 6,43,464 | |
| — | 8500.00 | — | — | ||
| Supply of Power cable 3 core, 1.5sq. mm. PVC insulated power cable with ISI marks confirming spec. IS:694:1990 reaffirmed 1995 or latest. make: Finolex/Netco/Similar. Inspection: Consignee | — | — | — | 4,75,745 | |
| — | 17.00 | — | — | ||
| Supply of Optic Fibre Cable 6 Core(Single mode) armoured, confirming to TEC Spec. TEC/GR/OFC-02/03.Sep.2003 or latst, Make: Uniflex/Usha martin/Birla ericson optical ltd./similar. Inspection: Rites. | — | — | — | 7,08,016 | |
| — | 17.00 | — | — | ||
| Supply of PLB-HDPE Duct for UG armoured Optical Fibre Cable diameter 40.0 mm, as per RDSO Specification No. RDSO/SPN/TC/45/2013 Revision 2.0 or latest, in length of 1000mtrs/roll. For each K.M. of HDPE duct pipe following items are to be supplied (a) end plugs-02nos., (b) cable sealing plugs-02nos., (c) plastic couplers slip fit/push fit type-02nos., (d) end plugs to be provided along with drum-02nos. MAKE: WESTERN/Gangotri/similar. Note: OFC being laid for any other applications like SCADA for switching stations, HDPE Ducts of other Colours shall be used like PINK/VIOLET, GREEN as per Technical Circular-124-A" (Modified)-attached, Inspection: Consignee | — | — | — | 10,68,739 | |
| — | 17.00 | — | — | ||
| Laying Of HDPE DUCT 40/33 mm in trenchs and protective works including pulling of single mode armoured OFC Cable( fibre) through duct in trenches as advised by site engineer. Note: (1)Contractor will take over the OFC cable from Railway store to site of work duly checked the continuity of each fiber from end to end (2) before & after cable laying of OFC cable through duct, continuity test from end to end of each fiber to be made by contractor to ensure availability of all fibers duly certified by the site enginner. | — | — | — | 4,20,478 | |
| — | 9000.00 | — | — | ||
| Cutting of platform surface (tile/slab/concrete) for a depth of 20cm & width of 10cm. & refiling /reconditioning/ repairing the platform after laying pipe & cable. Cutting should be done with marble cutting machine in proper manner & restore the same as before in such a manner that asthetic of PF is not disturbed. Inspection: Consignee | — | — | — | 34,29,270 | |
| — | 13.00 | — | — | ||
| Supply & installation of UPS online 6KVA with min. 4Hrs. Back up time. Along with all accessories including battery rack & connecting cables. Battery 12V/100Ah min. capacity of Exide/AmaraRaja. No. of battery: 16 or as demanded by model of UPS , Microprocessor controlled high input power factor >0.95 pure sine wave true double con version technology , self diagnostic large LCD monitor 32 character with UPS operating status, high compatibilty with generators, smart over load & short circuit protection for utility/in verter mode, make: Numeric/APC/similar, Inspection: Rites. | — | — | — | 27,98,950.7 | |
| — | 7.00 | — | — | ||
| Supply & installation of GPS BASED SYNCHRONIZATION Digital Tower clock, Lenght: 12F T. Breadth: 3F T. Width: 6inch (approx), Details attached as per annexure. make: R oy bros. & co./Sun electronic/Indiana watch. Inspection: Rites. | — | — | — | 14,80,890.32 | |
| — | 40.00 | — | — | ||
| Supply of Floor mounting surge supressure(4 Nos. Of 16A Socket in each strip), protection should be provided in each socket separately , Weather proof light gr ay color M.S. enclosure, Normal input voltage: 230VAC,+/- 10% Single phase, 50- 60Hz, Input AC cord: 6 ft. 3 core 15 amps. One ANCHOR/Ha vells make 16 amps top to be provided at one end of the mains cord, LED indication: One 5mm red LED for power ON, One 5mm green LED for protection present., Output Termination: 4 Nos.16 amps socket of anchor mak e to be provided, Thermal cutoff: 16 amps MCB to be provided, make: Rockware/similar, Inspection: Consignee. | — | — | — | 3,15,497.2 | |
| — | 31.00 | — | — | ||
| Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest. Necessary testing certificate of UL, IEC to be produced. It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) Copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of 150x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate.(minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipment to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: RDSO. | — | — | — | 4,69,557 | |
| — | 31.00 | — | — | ||
| Installation of Unit Maintenance Free Earth as supplied in above item. It includes ( i ) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 150 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3-inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and bus bars to various equipment. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface (minimum copper bonding thickness of 250 microns to made requirement of under writer's laboratories (UL) 467-2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential bus bar, copper strips of 150 mm x 25 mm x 6 mm sub equip-potential bus bar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest. Inspection: Consignee. | — | — | — | 2,03,949 | |
| — | 34.00 | — | — | ||
| Supply of Splice Closure for Optical Fiber Cables Armoured and Metal free type OFC With screws sealing as per as per TEC/GR/TX/OJC-002/03/APR-2010, including all miscellaneous items & consumables for fiber splicing, Optical fibre joint/splice enclosure shall be compatible with the type of optical fibre cable 6 Core. make: 3M/Comscope/R&M/Drone Edge/similar, Inspection: Consignee. | — | — | — | 1,20,972 | |
| — | 20.00 | — | — | ||
| Supply of Fiber Distribution Management System 24 port, Single Mode, Simplex Fiber Optic Patch Panels, 19 inch 1 U Rack Mountable with SC connector with all accessories including Consumables Kits, make: Syrotech/Comscope/ Digisol/R&M/similar, Model: SY-LIU-24-XXX/similar. Inspection: Consignee. | — | — | — | 1,12,425.2 | |
| — | 35.00 | — | — | ||
| Jointing, terminating and Splicing of 6 Fibre Optical Fibre Cable and fixing of termination Box/FDF/Placing of joint clousers in pit required at various location including tranportation of all the jointing & terminating materials from railway store to the works site and returning leftover materials to the railway store. The rate should include all jointing materials. | — | — | — | 91,781.9 | |
| — | 100.00 | — | — | ||
| Supply of Single Port I/O Box With Frame Plate, No. of ports (RJ 45)-01, Dough Moulding Compound (DMC) material of box, Dust protection for Face Plate, Connector type: Rj45, Minimum size of the box: 75 mm x 75 mm x 50 mm, Thickness of Material: 2.5 mm or higher for DOUGH MOULDING COMPOUND (DMC), with Provision of earthing, Make:- D-Link/Similar. Inspection: Consignee. | — | — | — | 27,588 | |
| — | 100.00 | — | — | ||
| Supply of CAT-6 UTP RJ-45 patch cord (5mtr long) twisted stranded cable terminated with RJ45 modular plugs at both the ends. TIA/EIA-568-C.2 standard, Insulation Material : High Density Polyethylene, Outer Jacket: FR-PVC, Conductor diameter: 24 to 26 AWG, Conductor Metal : Bare Copper, Make D-Link/Similar Inspection: Consignee. | — | — | — | 25,872 | |
| — | 7.00 | — | — | ||
| Supply of Plena Mixer Amplifier 120 watt with built-in USB/Bluetooth feature for audio streaming, 4 microphone/line inputs, plus music source input, Mains power supply: 220 VAC ±10%, 50/60 Hz, Frequency response (Line):60 Hz to 20 kHz, Frequency response (Mic.): 70 Hz to 20 kHz, Connector Type: Cinch, Stereo Con verted to Mono, model: Plena PLE-1ME120- 3IN / similar, make: Bosch/Ahuja/similar. Inspection: Consignee | — | — | — | 1,25,361.74 | |
| — | 4200.00 | — | — | ||
| Over head laying of 6-core OFC cable along with FOB/Wall/shed structure etc. as per instruction of site engineer. | — | — | — | 2,10,672 | |
| — | 30.00 | — | — | ||
| Supply of Gigabit Ethernet Media Con verter Single Mode Single Fiber, SM, SC, 1310nm, T ransmission Type: 10/100/1000M FDX/HDX, Wavelength: Single mode: 1310/1550nm up to 20Km, Power Supply: External 1A,+5VDC, Connector: UTP: RJ-45 connector, Optical: SC connector (Single Fiber), with all accessories like power adaptor, make: JT Optics/Digisol/TP Link/similar. Inspection: Consignee | — | — | — | 1,77,393.9 | |
| — | 20.00 | — | — | ||
| Supply of LAN Extender Nomus Gatewaye / ES / ER / 2W G.SHDSL bis to support upto @ 5.7Mbps over on 0.5MM copper upto 3.5 Km, make: Nomous/D-link/similar, Model: Nomus Gatew ay e / ES / ER / 2W or similar. Inspection: Consignee. | — | — | — | 4,32,985 | |
| — | 30.00 | — | — | ||
| Supply of wall mount 6U Rack Enclosures Networking/Server Rack with power strip 5A socket 06 no. & MCB, Depth of the Rack: Upto 600mm, Transparent Toughened Glass used in front door, CRCA Steel rear door, with Secure Locks, Support cable entry from top or bottom, with fan tray and two nos. fans, , make: Valrack/Dlink/Digilink/similar. Inspection: Consignee. | — | — | — | 1,53,976.2 | |
| — | 22.00 | — | — | ||
| Supply, Installation, testing and Commissioning of GPS based Double Faced Digital Platform Clock with LED color Red as per RDSO Spec No. SPN/TC / 62 /2008 Rev. 3.0 Amdt. -2 or latest (All fixing materials including GPS clock to be supplied by contractor). Inspection: Rites. | — | — | — | 10,19,480 | |
| — | 22.00 | — | — | ||
| Supply of digital clock suitable of office complex with GPS synchronisation as per as per RDSO No. RDSO/SPN/TC62/2008 or latest, (All fixing materials including GPS clock to be supplied by contractor). Inspection: Consignee | — | — | — | 2,90,730 | |
| — | 70.00 | — | — | ||
| Supply of 15watt Horn speakers, with 10watt tapping, matching transformer & driver unit, ABS (UV Protected) material, with all accessories, model: UHC15XT/similar, make: ASupply of 15watt Horn speakers, with 10watt tapping, matching transformer & driver unit, ABS (UV Protected) material, with all accessories, model: UHC15XT/similar, make: Ahuja/Bosch. Inspection: Consignee. huja/Bosch. Inspection: Consignee. | — | — | — | 1,33,070 | |
| — | 70.00 | — | — | ||
| Installation of Horn Type loudspeaker at different location as per instruction of site engineer. All required fixing materials to be supplied by contractor. | — | — | — | 15,957.2 | |
| — | 7000.00 | — | — | ||
| Supply of FR 2 core screened/shieled multistrand PVC Insulated cable (24/0.2mm dia) for speaker load line, make:Finolex/Havells/Polycab/similar. Inspection: Consignee | — | — | — | 2,45,000 | |
| — | 15.00 | — | — | ||
| Supply of Microphone with all accessories, with a sturdy, aluminium die-cast top and special high reliability switches with integrated LED indicators, Fitted with a flexible 300mm (12") gooseneck and a high quality unidirectional dynamic cartridge. Supplied with 6 mtrs. twin core shielded low noise cable with 6.3mm (¼") phone plug. Frequency Response: 50-10,000Hz, Sensitivity: 2.0mV/Pa, Impedance: 600, Make: Ahuja/Bosch/Studio Master, Model: ACM96/similar. Inspection: Consignee. | — | — | — | 51,075 | |
| — | 15.00 | — | — | ||
| Supply of Storwel plain 4 shelf almirah to store maintenance tools, Dimensions W x H x D: 90 x 195 x 50.7cm. Hinged door, CRCA Steel material, Number of Shelves: 5, with Warranty 1 Year, Make: Godrej or better. Model: Slimline 2 Door Steel Almirah/similar. Inspection: Consignee. | — | — | — | 2,57,445 | |
| — | 30.00 | — | — | ||
| Supply of ABS Telephone instrument single push button, Caller Id Landline Set,, 16 digit single line LCD Display, Real-time clock with year, date and month display, Outgoing capacity: 5 outgoing phone memory, Incoming capacity: 30 incoming phone memory, 2 Level ringer volume switch, Mute option, Redial, call back, including all accessories, model: BEETEL C-51/similar, make: Beetel/similar Inspection: Consignee. | — | — | — | 29,235.6 | |
| — | 40.00 | — | — | ||
| Supply of 4 Ports UnManaged PoE Switch, Switch Capacity: 12 Gbps Full duplex, Uplink Ports: 2, 1000Mbps; Switch Should Support Min. 10 Gbps Switching Capacity and Maximum 64 Byte Packet Forwarding Rate is 7.44 MPPS, PoE Power Supply: 1/2(+), 3/6(-), PoE Standard: IEEE802.3af, IEEE802.3at, Switch Should Support IEEE 802.3af & at compliance (for PoE ports) and minimum 60W Power Budget, Switch should support surge protection of 2kV as per IEC/EN 61000-4- 5, Switch should support IGMP Snooping v1, v2 and MLD snooping v1/v2, Switch shall support IEEE 802.1AB Link La yer Disco very Protocol (LLDP) or LLDP-MED, Switch should support Port Mirroring One to one/Many to One, Switch should support Qualit y of Service (QoS), 802.1p, Strict, Weighted Round Robin (WRR)/ Shaped Round Robin (SRR) scheduling, Switch should support Access Control List (ACL), Port Base, MAC Base, IP Based, L2 & L3 ACL (IPv4 and IPv6), Switch Should Support features IPv4 & IPv6 Inspection, SSH v2 feature, Flow Control go verned by IEEE 802.3x. , Switch Should Support Management thru console Port/Web-based/CLI. , Switch Should Support SNMP v1/v2c/v3. Power Source: Built-in Power Supply, Input: 110-264V AC, 50/60Hz, make: CP Plus | — | — | — | 1,34,986.4 | |
| — | 10.00 | — | — | ||
| Supply of Remote Monitoring System with NMS. CDC shall be connected to RMS & RMS can be connected to Railnet/ any other compatible network for remote monitoring. Configuration of RMS Server shall be as per RDSO/SPN/TC/108/2019, Version- 2.0 with Amendment No. 1 or latest. Note materials are to be procured from RDSO Developmental Vendors. Inspection: RDSO | — | — | — | 19,06,676.5 | |
| — | 30.00 | — | — | ||
| Supply of SC-SC-5 MTR PATCH CORD ARMOURED SIMPLEX, Cable Diameter: simplex : 3.8mm, Outer Jacket: PVC or LSZH, Ferrule Type: Ceramic, Connector Retention: 100N, Armoured Flexible Tube Material: Stainless, Inner Diameter: 0.9mm, Tensile Strength : less than or equal to 147 N, Min. Bend Radius : greater than or equal to 40 ± 5vv, Pressure Resistance: less than or equal to 2450/50 N , Inspection: Consignee. | — | — | — | 15,845.1 | |
| — | 30.00 | — | — | ||
| Supply of SC-SC-10 MTR PATCH CORD ARMOURED SIMPLEX, Cable Diameter: simplex : 3.8mm, Outer Jacket: PVC or LSZH, Ferrule Type: Ceramic, Connector Retention: 100N, Armoured Flexible Tube Material: Stainless, Inner Diameter: 0.9mm, Tensile Strength : less than or equal to 147 N, Min. Bend Radius : greater than or equal to 40 ± 5vv, Pressure Resistance: less than or equal to 2450/50 N , Inspection: Consignee. | — | — | — | 26,144.4 | |
| — | 30.00 | — | — | ||
| Supply of SC-SC-20 MTR PATCH CORD ARMOURED SIMPLEX , Cable Diameter: simplex : 3.8mm, Outer Jacket: PVC or LSZH, Ferrule Type: Ceramic, Connector Retention: 100N, Armoured Flexible Tube Material: Stainless, Inner Diameter: 0.9mm, Tensile Strength : less than or equal to 147 N, Min. Bend Radius : greater than or equal to 40 ± 5vv, Pressure Resistance: less than or equal to 2450/50 N , Inspection: Consignee. | — | — | — | 61,399.5 | |
| — | 30.00 | — | — | ||
| Supply LC-SC-10 MTR PATCH CORD ARMOURED SIMPLEX, Cable Diameter: simplex : 3.8mm, Outer Jacket: PVC or LSZH, Ferrule Type: Ceramic, Connector Retention: 100N, Armoured Flexible Tube Material: Stainless, Inner Diameter: 0.9mm,Tensile Strength : less than or equal to 147 N, Min. Bend Radius : greater than or equal to 40 ± 5vv, Pressure Resistance: less than or equal to 2450/50 N , Inspection: Consignee. | — | — | — | 30,897.9 | |
| — | 30.00 | — | — | ||
| Supply LC-SC-5 MTR PATCH CORD ARMOURED SIMPLEX , Cable Diameter: simplex : 3.8mm, Outer Jacket: PVC or LSZH, Ferrule Type: Ceramic, Connector Retention: 100N, Armoured Flexible Tube Material: Stainless, Inner Diameter: 0.9mm, Tensile Strength : less than or equal to 147 N, Min. Bend Radius : greater than or equal to 40 ± 5vv, Pressure Resistance: less than or equal to 2450/50 N , Inspection: Consignee. | — | — | — | 17,033.4 | |
| — | 30.00 | — | — | ||
| Supply of FC-SC-3 MTR PATCH CORD ARMOURED SIMPLEX, Cable Diameter: simplex : 3.8mm, Outer Jacket: PVC or LSZH, Ferrule Type: Ceramic, Connector Retention: 100N, Armoured Flexible Tube Material: Stainless, Inner Diameter: 0.9mm, Tensile Strength : less than or equal to 147 N, Min. Bend Radius : greater than or equal to 40 ± 5vv, Pressure Resistance: less than or equal to 2450/50 N , Inspection: Consignee. | — | — | — | 9,265.2 | |
| — | 30.00 | — | — | ||
| Supply of FC-SC-5 MTR PATCH CORD ARMOURED SIMPLEX, Cable Diameter: simplex : 3.8mm, Outer Jacket: PVC or LSZH, Ferrule Type: Ceramic, Connector Retention: 100N, Armoured Flexible Tube Material: Stainless, Inner Diameter: 0.9mm, Tensile Strength : less than or equal to 147 N, Min. Bend Radius : greater than or equal to 40 ± 5vv, Pressure Resistance: less than or equal to 2450/50 N , Inspection: Consignee. | — | — | — | 21,733.2 | |
| — | 30.00 | — | — | ||
| Supply & installation of JT 1:8 Fiber Optical Splitter 1310nm PLC Type SC Input SC Output G652D Fiber Box Type, Integrated with splice cassette and cable management rods., with all accessories, make: Syrotech/JT optics/similar, Inspection: Consignee. | — | — | — | 87,381 | |
| — | 300.00 | — | — | ||
| Supply of self Adhesive electrical insulation tape, size: 1.8 c.m x 6.5 m x 0.125 mm , make: steelgrip/similar. Inspection: Consignee. | — | — | — | 2,463 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AnnexureA.pdf
ATTACHMENT
CABLECUT_DiggingJPO_12.08.2024.pdf ER cable cut JPO
ATTACHMENT
MergedGCCCorrectionSlip78910.pdf
ATTACHMENT
TenderDocument_SnT.pdf
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
GCC Correction Slip
ATTACHMENT
GCC Correction Slip2
ATTACHMENT
mergedGCCCorrectionslip3456.pdf
ATTACHMENT
2022_CE-I_CT_GCC-2022Policy14.07.2022.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022-POLICY_13.12.20221.pdf
ATTACHMENT
2018-CE-I-CT-9dtd.pdf
ATTACHMENT
Annexure-C.pdf
ATTACHMENT
AllAnnexure.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
CABLECUT_DiggingJPO_12.08.2024.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .