8914/E8

Amount

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and as directed.

M&L for rendering 20 mm thick on brick work or concrete surfaces of wall in two coats, first coat 10 mm thick in cement mortar 1:4 and final coat 10 mm thick in cement mortar 1:4 final coat mixed with WPC @ 2% by weight of cement or as per manufacturer instructions, finished surface even and smooth without using extra cement complete all as directed. Note :- Water proofing compound (WPC) shall be measured and paid separately.

Supply only integral water proofing compound conforming to IS-2465-1975 complete all as specified and directed.

M&L 10 mm thick plastering in cement mortar 1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in screed bed of tiles.

M&L coloured Glazed ceramic tiles in vertical surface 450 x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule).

M & L preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primer complete all as specified and directed.

M&L MS rolled section of grade Fe-410-W (Gde - E-250), quality - A (beam, tee, angle channel or flat sections) as in roof trusses (framed), trussed purlins, crane gantries rails, and fastening and heavy bracket framing including distance pieces, cleats etc. complete all as specified and directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Excavating in trenches n. exc. 1.5 m. wide and n. exc. 1.5 m. in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on plan and not exc. 1.5 m. in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L PCC 1:3:6 type C2 type (using 40 mm graded broken stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match compete all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule).

Excavating over areas n. exc. 1.5 m deep and getting out in soft/loose soil all as specified and directed.

Removing excavated soil exc 250mtr but n.exc. 500mtr and depositing where directed above the starting point in soil complete all as specified and as directed.

M&L hard core of broken stone of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in floor finish concrete surface even and rough finish to receive topping layer complete all as specified and directed.

M&L 100 mm thick cement concrete 1:2:4 type B2 (using 40 mm graded crushed stone aggregate) as in floor finish concrete surface even and rough finish to receive topping layer complete all as specified and directed.

M & L 25mm thick PCC ( 1:2:4 ) type B-1 using 20mm graded stone aggregate as in floor and finished even and smooth complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed.

M&L Vitrified Ceramic tiles of light shade 10mm thick (Square or Rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors, set and Jointed in neat cement slurry and pointed in coloured cement to match the tiles, complete all as specified and as directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule)

M&L Vitrified Ceramic tiles of light shade 10mm thick (Square or Rectangular) polished area of each tiles not exceeding 0.36 Sqm, in skirtings dados etc set and Jointed in neat cement slurry and pointed in coloured cement to match the tiles, complete all as specified and as directed. (Note : Backing layer shall be measured and paid separately under respective items in this schedule)

Shanti Construction Company

MS HORIZEN

PUTUL CONSTRUCTION CO.

DGR CONSTRUCTION

CHOWDHURY SMALL INDUSTRIES

TOTCO

M/s Santosh Industrial Corporation