Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAccepted-AOC UTARLAI KAWAS BARMER RAJASTHAN 344 001 | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹26.0 L+₹1.3 L (5.41%)Rejected-Finance S O KALA RAM C O LALIT AND BROTHERS UTARLAI UTTARLAI VPO UTTARLAI BARMER RAJASTHAN 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹30.2 L+₹5.6 L (22.6%)Rejected-Finance 2 EVEREST VIHAR PT T N MISHRA MARG NIRMAN NAGAR JAIPUR 302019 | JAIPUR | RAJASTHAN | 302019 | L3 | Rejected-Finance Other than lowest | |
| 4 | Rejected-Technical 224 OFFICERS ENCLAVE BEHIND PLV MEMORIAL COLLAGE SHIKARGARH ARMY AREA JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | - | Rejected-Technical Rejected |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Utarlai
GE AF Utarlai PB No 11, Barmer (Raj)344001
REPAIR TO CERTAIN E/M INSTALLATION IN DOMESTIC AREA AT AF STN UTARLAI
2022_MES_565064_2
8345/E8
Open Tender
Construction Works
Item Rate
180 days
Uttarlai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE AF Utarlai
₹50,000
Yes
28 Mar 2023
15 Dec 2022
12 Jan 2023
16 Dec 2022
5 Jan 2023
22 Dec 2022
Amount
Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.
M&L for rendering 15 mm thick in CM 1:6 on concrete surfaces/ brick / PCC block surface, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:4 on concrete surfaces/ brick / PCC block surface,Finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 05 mm thick in CM 1:3 on concrete surfaces in ceiling including finishing even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting all as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, all as directed.
M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed.
S&F in repair sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.
ditto- all as per item No. 8 above but tinted /transparent, 5.00mm thick and area as per gound required each pane complete all as specified and directed.
Supply & Fix in repairs 3 mm thick frosted glass ordinary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed
S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and including with wooden beading supplied.
Supply & Fix in repair 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed
Supply & Fix in repairs aluminium alloy anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium complete all as specified and as directed
S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm.
Supply & Fix in repairs aluminium anodised barrel tower bolt or extruded section length of bolt 150 mm long complete all as specified and directed
S&F 20-25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
S&F in repairs tubular towel rail, brass chromium plated, 20 mm dia ''D'' type, 60 cm long between flanges and fixed complete all as specified and directed.
Taking down chowkats or frames with shutters/ window (Without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as directed.
S & F 100 mm Aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21all as spd and dircted.
S&F Aluminum tower boltes of extruded section of size 150mm.
Supply & Fix 150 mm long extruded aluminium alloy handles, fabricatee type anodised complete all as specified and as directed
S & F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.
Repairing, resecuring, easing, adjusting shutters of any description exc 1 sqm but not exc 2 Sqm each without taking down inclduing necessary repairing old iron mongry, if required compete all as specified and directed.
Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (without takking off shutter from the frame) complete all as specified and directed.
Taking down ventilator with frame complete nexc 1.0 sqm each complete all as specified and directed.
S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 and two coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.
S&F three track aluminum anodised sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed.
S&F fixed type anodised aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 65x40x1.5mm thick etc in frame and shutter frame aluminium section size 37x18x1.2mm complete all as specified.
S&F anodized aluminium brown/white colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, 3 Nos 100mm size Aluminium hinge in each shutter (if required ) with provision DG 104 type aluminium grill in both upper and lower panel including aluminum angle beading compete all as directed.
S&F in repairs aluminium door closer hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete
S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F fixed type anodised aluminium partition in 2 panels with 5mm thick tinted / transparent glass, c/c distance between two vertical member nexc 1.2m and c/c distance between 2 horizontal member nexc 1.3m including rubber gasket, aluminium beading, the vertical member shall be embeded in PCC block 300x300x200mm deep with 150x150mmx6mm thick MS sheet bottom all necessary fittings arrangement complete using aluminium section 65x40x1.5mm thick etc in frame complete all as specified
S&F in repair provision of neoprene /EPDM rubber gasket for aluminium doors/ window glass fixing complete all as specified
M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specifified and directed.
Supply and laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down the old tubing complete all as specified and directed.
Supply and laying 20 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down the old tubing complete all as specified and directed.
Supply and laying 25 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down the old tubing complete all as specified and directed.
Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20cm girth complete all as specified and directed.
S&F in repairs 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs, 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs Vitreous china water closet (Sqating Pattern) "Orissa Pattern" size 580x440mm white with 'P' or 'S' trap front or back inlet and integral foots rest any pattern including connecting pipe of CI at suitable bore and length and incl re-fixing of old Cistern, flush pipe etc if required & set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish etc out side of MOD land complete all as specified and directed.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length, complete all as specified.
S&F In repairs PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene of low or high density (including dismantlling of half turn valve 32 mm of any description , if required) complete all as specified and directed.
S&F in repairs chromium plated shower rose 80 mm dia with CP arms, with or without swivel joints, including fixing to 15 mm steel pipe or union complete all as specified and directed.
S&F in repairs straight 5.50mm thick sheet glass corner shelf 300mm x 300mm size in quarter circle shape or rounded at one side with Cromium plated railing , mounted on decorative chromium plated bracket assembly set complete all as specified and directed. Note : sample of glass shelf shall be provided/ decided by Engineer-In-Charge.
S&F in repair choromium plated soap dish complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises all as directed
Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc
M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.
M&L for glazed ceramic tiles, coloured, 350mmx 250mm x7 mm/450 x 350 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.
Chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying CICO Clean-o rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. Make: CICO clean-O-rust, CICO ZINCILATE-500 or equivalent in Fosroc/Dr Fixit/ACC/L&T/STP
Demolition of reinforced cement concrete in roof slab/chajjas / beams / cantilever/ balcony/ staircase etc and other suspended work of any description complete all as specifed and directed by engineer-In-Charge.
M&L RCC 1:2:4 nominal mix (20mm graded aggr) as in chajjas, downward facia, roof projection, parapet wall and the like complete all as specified and directed.
M & L for form work for flat fair finish to chullah hoods, chajjas, downward facia , parapet , roof projection troughs, facia and similar items including edges.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge.
M&L TMT bars 6mm to 8mm dia bar , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as in stirupps complete all as specified and as directed by Engr-in-charge.
M&L driiling holes with 10 mm to 20mm dia and 75 to 100mm deep as required and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with two component polyester resin anchoring grout (two pack system consist of 1 part of resin and 2 hardner part) hole with CICO RESIFIX-G @ 300gm per holes with all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : reinforcement shall be paid and mesurered separately) Make: CICO RESIFIX-G or equivalent in Fosroc/Dr Fixit/STP.
M & L for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of CICO-Latex SBR or equivalent in Fosroc/Dr Fixit/STP as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc., complete as per specification and as directed. MAKE: CICO LATEX SBR or equivalent in Fosroc/Dr Fixit/krishna conchem/STP.
M & L for perparation the surface and applying 10 to 40 mm thick in layers , each layer n.exc 20mm thick with polymer modifed mortar (PMM) on sufcace of slab/columns/beams/chajjas/parapet /roof projection/balcony/staircase with PMM-CICO Repocem PM or equivalent in Fosroc/Dr Fixit/STP including all necessary scaffolding, man and material complete all as specified and directed by Engineer-In-Charge.
Demolition of plain cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection all as specified.
M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate in filling back of PS Chawkhat/frame and in bed blocks to hold fasts/ bed blocks/ block for fixing of fencing posts etc including making good to the disturbed portion complete all as specified and directed.
S&F in repairs 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed.
Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.
M&L PCC for 20cm thick precast cement concrete Type C1 1:3:6, block masonry with solid block, set in CM 1:6 all as specified & as directed.
M & L for 75 mm thick PCC 1:3:6 type C-2 (40 mm graded stoneaggregate) finishing the surface with even and fair without using extra cement all as directed.
M&L for 150 mm thick PCC (1:2:4) type B-1, as in floors finished even and smooth without using extra cement all as directed. Note : PCC shall be laid in panel and each dimension of panel nexc 5m in each direction. Construction, dummy and expansion joints shall be made as per SSR 2009 part 1
M & L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 150mm thick concrete thickness
M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with grade "A" sealing compound
M&L for 25mm thick PCC (1:2:4) type B-0, as in floors finished even and fair without using extra cement all as directed. .
M&L for 75 mm thick PCC (1:2:4) type B-1, as in floors finished even and fair without using extra cement all as directed. .
M&L for rubber moulded coloured chequered cement concrete tiles, 20x20x25cm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiles complete all as specified.
M&L for heavy duty Endura vitrified parking tiles/ working place tile with mat finish or as required , 30cmx30cmx10mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiles complete all as specified.
M&L Rubber moulded coloured (Machine pressed) precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over complete all as specified.
M & L for sand filing in under floor or in foundation complete
S&F in repair cast iron floor trap, 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified.
All as per item No. 82 above but 100mm dia of outlet for WC's without grating complete all as specified and directed.
S&F in repair cast iron nahani trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4).
S&F in repairs branch pieces single 'T' 100 mm bore equal or unequal with oval access door
S&F in repair 75 mm bore cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured).
S&F in repair 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured).
S&F in repairs 100 mm CI connection socket/ bend to fit out let of WC
S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to wall including dismantling old pipe complete all as specified & directed.
All as per Ser item No 89 here-in-before but 100 mm bore and laid in trenches or in floors or fixed to wall including dismantling old pipe complete all as specified & as directed.
M & L for machine cut Kota stone slab 20-25mm thick in floors , riser of steps, skirting, dado and pillar laid over cement mortar 20mm thick CM 1:6 screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including dismantling of old stone slab, tiles complete all as specified and directed.
Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete , brick including taking out embedded portion of concrete and making good distrubed ground complete all as specified and directed.
Dismantling fencing wire mesh/chain link , any type
Excavation in post holes(or similar holes) in any type of soil each n exc 0.5 cum getting out, returning, filling in and ramming earth around, in layers n.exc 25 Cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified.
S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed including Dismantling existing broken /rusted barbed wire and removing from site complete all as specified and directed.
supply only chain link Mild Steel galvanised fencing of mesh size 75x75mm complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type, any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed.
Supply & fixing MS round bar 10mm dia and over, cut to length and bend to shape required and confirming to Gde-I, IS-432 for line wire to chain link fencing etc complete all as specified.
S&F MS screw bolt (machine made) with hexagonal or square heads at one end and screwed the other end, and fitted with washers and one hexagonal or square nut n. exc 5cm long and 5 mm to 10mm dia of bolt complete all as specified
S&F in repairs wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary welding, drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified. Note : Embedded portion in concrete of posts or struts shall be treated with tar or coal tar black paint and cost of same shall be included in the quoted rate of this item.
M & L for applying roof treatment on top of roof with 3 mm minimum thickness APP modified membrane (weighing 3 Kgs/persqm) with non-woven polyster reinforcement/mat(centre core) with thermal insulation with white mineral finish on upper side of membrane laid by rorch application method with overlap 100 on length and 100 mm on the width side as per manufacture's instructions over a coat of approved cold applied butuminous oil based primer (IS-3384) @ 250gm/sqm including rendering 10mm thick in cement mortar 1:3 with WPC as per manufacturere innstructions complete all as specified and directed by engineer-in-charge. Note :- water Proofing Compound shall be measured and paid separetely.
Supply only water proofing compound
M & L for Wire brushing and cleaning top surface of tiles at roof slab, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area)
M & L for Providing, cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges
Material & Labour for preparation of old plastered/unplastered surfaces by brooming down or steel wire brushing scrapping down smoke ,roof moulds moss and efflorescent salt and trading oil and greasing spots of walls and applying two coats of white wash on wall all as specified.
All as per item No 105 above but on ceiling and in two coats white wash complete all as specified
Material and Labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engr-in-Charge.
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.
Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper over one coat of wall care putty complete all as specefied and directed by Engr-in charge .
M&L For complete removal of existing treatment and applying two coats of cement base paint over a coat of primer on old decorated wall surfcace including preparation of surface all as speccified. Note : cement base paint shall be applied by the brush not by spray gun.
S & F framed work as in doors or gates or coolar stand of angle or other section with gusset plates, rails, braces, etc, comlete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165 including dismantling old iron work.
S & F for Mild steel Plates (plain or chequered) channels, square cut or notched forming holes, without any attachment grade Fe- 290 Gde E- 165 including dismantling old iron work complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old rain water pipe complete all as specified and directed.
S&F in repair 110mm PVC(SWR) bends any radius complete all as specified and directed.
Rough Excavation in soft/loose soil n.exc 1.5m deep and getting out complete. Note : excavation shall be carried out Outside MOD land .
Removing excavated material exc 1.50km but nexc 5.0 km depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming and finishing to required size, shape, etc., n exc. 1.5 m high from base Including Removal of soil not exc. 50 m.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc.,exc. 1.5 m but nexc 3.0m high from base Including Removal of soil not exc. 50 m.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc.,exc. 3.0 m but nexc 4.50 m high from base Including Removal of soil not exc. 50 m.
M&L for preparing of new steel surfaces over 10 cm in width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparing of new steel surfaces n exc 10 cm in width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Lalit and Brothers
Rasam Engg Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .