Addn/Altn to OTM Accn at Muzaffarpur under GE Danapur

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) all as directed.

Dismantling of floor, walls, roof tiles including bedding but not backing and rubbish off permises complete all as directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as directed.

10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match complete all as directed.

Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as directed.

Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying of floor tiles complete all as directed.

25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as directed.

Glazed ceramics coloured tiles of size 450mmx350mmx7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as directed.

10 mm thick plaster in cement mortar (1 : 4) for fixing of wall tiles complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick over 20mm thick cement screed base in cm(1:6) laid and jointed with cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick in riser of steps, skirting, dado etc laid over 15mm cement plaster in cm (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete complete all as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4) in half brick thick wall complete all as directed.

Sand filling under floors or in foundations, laid in layers n exc 15 cm thick, spread levelled including watering and consolidation complete all as directed.

Hard core of broken bricks of gauge not exc 63 mm deposited spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as directed.

PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) in foundation, sub base, mass concrete & cinder concrete etc.complete all as directed.

PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) for insertion of hold fast including necessary form work etc all complete all as directed.

75 mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge and 10mm wide and 75mm deep joints at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio (1:3) complete all as directed.

Treatment of soil under existing floors using chemical emulsion @ one ltr per hole , 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 ( 1 cement : 2 coarse sand ) to match the existing floors complete all as directed.

Treatment of soil along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear meter including drilling and plugging holes with cement mortar 1:2 to match the existing floor complete all as directed.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as directed.

15 mm thick rendering on fair faces of bk /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as directed.

Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as directed. Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked complete all as directed.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as directed.

All as per above item No 26 but exc 1.5 Sqm but n.exc. 4 Sqm each.

Taking down shutter of any description exc 1 sqm but n. exc 2sqm each and removing to store complete all as directed.

35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as directed.

Factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as directed.

30 mm thick flush shutters solid core construction with particle board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as directed.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as directed.

All as per item No 32 but without glazing bar complete.

Steel ventilators with top hung shutters including hinges, steel peg stay complete all as directed.

Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as directed.

Pressed steel frame of size 105mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. complete all as directed.

Pressed steel frame of size 125 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as directed.

Plain cement concrete (1:2:4) type B-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as required complete all as directed..

Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet used & edges will be painted to match with prelam sheet, reinforced with MS square tube, supplying and fixing in opening as per specification and drawing (section 8 of SSR part-II) complete all as directed.

Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing (section-8 of SSR part-II) complete all as directed.

100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as directed.

Aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as directed.

200 mm long aluminum anodised barrel tower bolts of extruded section complete all as directed.

150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

150 mm extruded aluminium alloy handles, fabricated type anodised complete all as directed.

100 mm extruded aluminium alloy handles, fabricated type anodised complete all as directed.

Floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete all as directed.

Small fitings of 1st class hard wood door, window stops and the like not exc 200 cucm each including MS butt hinges, medium weight, cold rolled 50mm long complete all as directed.

Stanless steel wire clock 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as directed.

Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as directed.

3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as directed.

3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as directed.

18/19 mm thick Prelaminatd particle board, interior grade (PLB-23) prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in repair complete all as directed.

100 mm long hasp & staple aluminium anodised wire type, including bolt to hinge plate and fixed with screw complete all as directed.

100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as directed.

SS Pag set of six powder complete all as directed.Make:- Prayag/Jaquar/Hindware.

Mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colouras in repair complete all as directed.

Mild steel Bracket with PVC coating fancy type for curtain rod 20 mm complete all as directed.

Powder coated (mimimum 50 micron)anodised aluminium frame & shutters sliding or casement type for window/ventilator with one or more rebates including joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc for fixing complete.

Taking up or down steel tubing and connections, including cleaning for re-fixing of 15 mm bore complete all as directed.

As per item No 62 but 20mm bore

16 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as directed.

20 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as directed.

Chromium plated central hole basin mixer regular type without popup waste system with 450 mm long braided hoses as in repair complete all as directed. Make Cat No.G3014A1 of parryware or equivalent of the make as mentioned in list of make.

Chromium plated wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange as in repair complete all as directed. Make Cat No.G3017A1 of parryware or equivalent of the make as mentioned in list of make

Vitreous china WHB size 550mm x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer as in repair complete all as directed. Make Cat No . CO447 of parryware or equivalent of the make as mentioned in list of make.

White vitreous china wash down water closet pan pedestal pattern Casecad type(white) excluding flushing cistern and flush pipe as in repair complete all as directed. Make Cat No . CO221 of parryware or equivalent of the make as mentioned in list of make

Vitreous china squating pan 'Orissa' pattern WC size 580mm x 440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete as in repair including making good to floor complete all as directed. Make Cat No . CO117 of parryware or equivalent of the make as mentioned in list of make.

10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of 32mm dia fixed to wall as in repair complete all as directed. Make Cat No . SLIM LINE E8090 of parryware or equivalent of the make as mentioned in list of make.

Chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer as in repair complete all as directed. Make Cat No . T9875A1 of parryware or equivalent of the make as mentioned in list of make.

PVC connection 15mm dia size and 600mm long with 2 Nos check nuts washers as in repair complete all as directed.

Cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as directed.

Bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as in repair complete all as directed. Make Cat No . G3004A1 of parryware or equivalent of the make as mentioned in list of make.

15 mm bore fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed as in repair complete all as directed. Make Cat No . G3002A1 of parryware or equivalent of the make as mentioned in list of make.

CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges as in repair complete all as directed. Make Cat No . T6401A1 of parryware or equivalent of the make as mentioned in list of make.

Aluminium anodised tubular towel rail 20 mm dia D type 60 cm long between flanges as in repair complete all as directed.

Angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe as in repair complete all as directed.. Make Cat No . G4743A1 of parryware or equivalent of the make as mentioned in list of make.

CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule as in repair complete all as directed. Make Cat No . G4743A1 of parryware or equivalent of the make as mentioned in list of make.

Stainless steel soap dish, of standard size and shape as in repair complete all as directed.

Chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long as in repair complete all as directed. Make Cat No . T9809A1 of parryware or equivalent of the make as mentioned in list of make.

Plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC as in repair complete all as directed. Make Cat No . E-8307/E-8306 of parryware or equivalent of the make as mentioned in list of make.

PVC (SWR) 'P' trap for 110 mm dia complete all as directed.

Chromium plated toilet paper holder with flap complete as in repair complete all as directed.

RCC as in kitchen platform, shelves & chajjas etc type B1 (1:2:4) (using 20 mm graded stone aggregate) including necessary form work complete all as directed.

16-18mm thick granite slab machine cut bedded in cooking platforms, steps, window cills, incl grinding and polishing ,edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as directed.

Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe complete all as directed.

PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as directed.

PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as directed.

PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as directed.

Clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as directed.

PVC(SWR) bend of 110mm dia of any radius complete all as directed

PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as directed.

PVC(SWR) Tee of 110mm dia complete all as directed

PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as directed.

PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as directed.

Ditto all as per above item No.100 but 75 mm bore

PVC (SWR) vent cowl 110mm bore complete all as directed.

PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia complete all as directed.

Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs complete all as directed.

Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as directed.

Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity complete all as directed.

Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity complete all as directed.

Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as directed.

Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe as in repair complete all as directed.

Preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as directed.

Preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as directed.

Removing old paints by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete all as directed.

Preparing old wooden surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as directed.

Preparing old steel surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as directed.

2mm thick wall care Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as directed.

Two coats of Oil Bound Distemper of any light shade complete all as directed

Preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as directed.

Two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as directed.

1mm thick wall care putty in one layer on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as directed.

Preparation of old surfaces of ceiling and applying two coats of white wash complete all as directed.

Preparation of newly plastered surfaces of ceiling and applying 1 mm wall care putty in one layer including preparation of new surface complete all as directed.

Two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as directed.

Preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as directed.

Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as directed.

Preparation of old plastered or unplastered surfaces of wall including scrapping down with wire brush and applying two coats of cement based paint complete all as directed.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets complete all as directed.

False ceiling with GI frame work (Grid size 595mm x 595mm ) for seamless ceiling comporising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediated channel with connecting clips across the intermediate channel at 457 mm centre to cente including Hangers 6 mm dia. G.I (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long including 4 mm thick Non asbestos fibre cement building boards fixed or laid to framework with screws complete all as directed.

Wall lining of PVC hollow sheet 5-7 mm thick consisting of 20 mm MS hollow square tubes grid and fixed with screws complete all as directed. (Make- Syntex/Rajshree)

Roof Trusses (framed) trussed, purlins ,crane gantries , rails and fastenings and heavy brackets framing (beam tee, angle ,channel or flat sections) including distance piece ,cleats etc.complete all as directed.

5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on the wall to make PVC frame complete all as directed.

Cutting holes into or through brick walls built in cement mortar/cement lime mortar superficial area n.exc. 150 Sq. cm and making good in cement mortar (1:3) or PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate ) as required complete all as directed.

Two coats of elastomeric cementatious coating Pidifin 2k of pidilite or equivalent in fosroc, sika, STP on exposed brick surface after complete removal of old plaster surface complete all as per manufacturer instructions and as directed.

Powder coated (minimum 50 micron)aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as directed (a) chowkhat frame of size 81.25 x 38.10 x2 mm thick weight not less than @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 2 mm thick weight not less than @ 0.667 Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 2 mm thick weight not less than @ 0.667Kg/RM (d) Bottom rail of size 100x 44.45x 2 mm thick weight not less than @ 1.69 Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 5 to 6 mm thick Aluimnium composite panel thick with clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter. (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

Powder coated (minimum 50 micron) aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x2 mm thick weight not less than @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 2 mm thick weight not less than @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 2 mm thick weight not less than @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. (Make - Kelwyn / Amar/Sandhu/Godrej)

Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm complete all as specified and directed by Engr-in-Charge. (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces. (iii) Laying unrolled over the bitumen coated surface,APP based polymeric water proofing membrane wt not less than 3kg /Sqm and minimum 3mm thick rainforced with polyester non woven fabric (wt not less than 150 gm/sqm) with 100 mm overlaps shall be sealed by flame as per manufacturer's instruction. (iv) Applying bituminous aluminium paint @ 0.20kg/ Sqm in two coats including preparation complete.

M&L for PCC (1:2:4) type B0 (Using12.5 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as directed,

10 mm thick rendering on roof surfaces/concrete surface in CM (1:4) complete all as directed.

Taking down carefully copper/aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete as directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN main switches inclu old unserviceable MCCBs /MCBs, isolators etc and making good to disturbed surfaces of walls complete all as directed.

Taking down carefully copper / aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surface of walls 'floors roofs etc complete all as directed .

Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan ,fan blades and deposit to MES store yard of AGE E/M Danapur complete all as directed.

Point wiring PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in cancealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes for mounting switches, sockets, fan regulators etc complete all as as directed for the one light point controlled by one , one way switch 5 Amp

All as per item No 143 above but one fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulators.

All as per item No 143 above but one 3 point 5 Amps socket out let point controlled by one switch on same board

All as per item No 143 above but one 3 point 5 Amps socket out let point on independent board controlled by one switch.

All as per item No 143 above but wiring with 2.5 sq mm single core copper conductorcable of multistranded flame retardant PVC insulated unsheated 1100 volts grade for 15/16 amps switch socket combination point including necessary running of 2.5 Sqm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Switch piano type single pole one way 5 amp ,230 volt complete all as directed at site.

Switch Piano type single pole 15/16 amp, 230 Volts complete all as directed at site.

Socket outlet 2 in 1, 5 amp , 5 pin 240 volt complete all as directed.

Socket outlet 2 in 1, 5 pin, 5 and 15 amp, 230 Volts complete all as directed at site.

Ceiling rose surface bakelite with 3 terminal ISI marked for batten fitting complete all as directed.

Stepped type electronic Fan regulator flush type complete all as directed.

Lamp holder,PVC/ Polycarbonate type with back plate suitable for batten / slanting fittings complete all as as directed.

Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ Ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated 6 sqmm (nominal area ) stranded copper conductor FRLS cable as earth wire complete all as directed. Note: Two runs of 6 sqmm cable , one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

Sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240volts double door with magnatic locking system including necessary provision for inserting the DB's in wall by cutting the brick /stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as directed.

MCB Single pole and neutral rated capacity 6-32 Amps , 240 Volts breaking capacity 10 KA'C' curve complete all as spd and directed.

MCB Single polel rated capacity 6-32 Amps , 240 Volts breaking capacity 10 KA 'C' curve complete all as spd and directed.

Sheet metal enclosure with two pin and earth plug and socket single pole and natureal with single pole MCB 32 Amps, 240 Volts fixed in reapirs complete all as directed.

Labour only for refixing the ceiling fan obtained from item no. 142 above with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal inclu over hauliling the fan , painting of ceiling fans complete with two coats of synthetic enamel paint by spraying including filling cavaties with filler after cleaning all dust etc complete all as specified and as directed.

Highly efficient LED Bulbs , 10 W, direct fit lamp, in B-22 cap complete all as directed.

LED 9/10 watts batten aluminium extruded with decorative end caps complete all as directed. Make- Bajaj/Philips/ Havells.

Energy saving new generation 10 Watts LED Bulk head fitting IP 65 luminaire with opel diffuser prewired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0. 193 from ceiling rose to fitting complete all as directed. Make Bajaj Cat no. BIBWP 10 W LED or its equivalent in Philips/ Wipro/Havells

Wall mounted LED tubelight fitting 20 Watts batten for surface mounted anodized extruded aluminium housing ,high transmissitivity diffuser , high lumen output box type fitting , 230 volts and integrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally prewired and necessary mounting arrangements provision of new 3 core multistranded copper conductor of size 23/0. 193 from ceiling rose to fitting complete all as directed. Make- Bajaj Cat part No. BCLAB 20W WH LED P , Wipro Cat partNo. LL20-281-XXX065- ALI or its equivalent in Phillips,Havells.

Energy saving new generation enviournment friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 Watts with pre wired and necessary mounting arrangements and provisions of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps , nut , volts complete all as directed. Make Cat Part No "ENXTP24LWHCRPCSD of Bajaj or equivalent of the make as mentioned in list of make.

Recessed mounting fitting 1/42 watt ultra modern design archtectural LED luminaie which provides softinght and glasre free symmetrrical illumination suitable for armstronge/Grid ceilling including LED driver and 42 watt lamp incl accessiories complete all as directed. (Make: Havells/Philips/Bajaj/Crompton Greaves.) Make Cat Part No "BZRSQL43W of Bajaj or equivalent of the make as mentioned in list of make.

Energy efficient exhaust fan of 230mm sweep made of metal body Ventil Air-DS of Havells or equivalent type complete with louver with bolts nuts and washers size of the bolts 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as directed. (Note- cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rates quoted.)

CPRI approved factory made sheet metal box made out of 2mm thick MS sheet of size 600mmx900mmx200mm with single door hinged shutter and locking arrangement for fixing DBs, KWH meter etc flashed/grouting on wall incl painting with two coated of powder coated paint over a coat of red oxide primer with suitable glass vision panel of each meters shall be provided in the door for easy meters reading including taking down the old one completed all as directed.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6mm thick burried directly in ground vertically (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level ) connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel inclu 15mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangements with galvanised iron pipe light grade20mm dia, PCC Chamber , CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR Part I including excavation and earthwork in any type of soil /strata and testing on completion . Note:- GI earth wire 4 mm dia and 15mm dia protection pipe upto 7.5m from earth plate is deemed to be included in rate quoted.

MITHILA BUILDERS AND ENGINEERS

SANYOG CONSTRUCTION PRIVATE LIMITED

SHARDA CONSTRUCTIONS

MS HARI MOHAN GUPTA