CNB_DONGARGAONSHIV

Item no.1: Excavation in all kinds of soil including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road/embenkment as directed including cost of all materials machinery, labour, dressing bed and sides to required level and profile etc. with 1 km. lead and 6 m. lift.

tem no.2: Excavation in hard murum including boulders upto 0.60 m. diameter (0.113 cum.) for canal seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or formation of service road as directed including cost of all machinery labour, dressing bed and sides to required level and profile etc. with-4 km. lead and 6 m. lift.

Item no.3: Excavation in soft rock without blasting including and boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains / catch water drains etc placing excavated stuff neatly in dump area or for formation of service road as directed including cost of all machinery labour, dressing bed and sides to required level and profile etc with 1 km. lead and 6 m. lift.

Item no.4: Excavation in hard rock of all toughness by blasting including boulders above 0.60 m. diameter (0.113 cum.) minimising damage to sides slope of excavation in water prism area by adopting any one or combination of line drilling / pre-spliting/smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all machinery, labour, levelling bed etc. with lead upto 15 m and lift 6 m.

Item no.5: Providing laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed.

Item no.6: Providing and fixing including Cutting . bending hooking, laying in position and tying M. S./HYSD/TMT bars for reinforcement of R. C. C. works as per detailed drawing etc completed

Item no.7: Providing and laying in situ cement concrete of grade M15 (40 MSA) of trap/granite / gneiss /quartzite graded metal for PCC with or without surface reainforcement /RCC concreting requiring heavy of special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structurs intake structurs, training walls, piers, abutment etc. with betehing mixer with shuttering and scaffolding with an initial lead 50 m.and lift 1.50 m. plants and Transit curing etc. completed Contrese

Item no.8: Back filling upto ground level level behind the canal structures etc behind the ground completed (without royalty) with suitable material of approved quality in layers not exceeding 20 cm. without disturbing the structeur etc completed.

Item no.10: Providing and constructing rubble stone pitching with pin headers at stones and stone chips from approved sources including cost of all material, labour, hand packing /wedging stone chips 50 m and lifts as finishing etc.completed with lead upto directed.

Item no.11: Providing and and fixing canal information bord of 1.2 x 0.75 m prepared on 16 gauge M. S. Sheet with angle iron frame of size 35 x35x3 mm with cross bracing of size 25 x 25 x3 mm including painting with one coat of zinc chromate storing primer and two coats each of green / white back ground and back side grey store enameld bonded with red retro reflective sheets Engineering grade, border/letters/numeral / arrows coated non peal able crystal clear protective transparant coat retaining 100% reflection including two angle ron post of size 50 x50x 5 mm of 3.65 m long inflated at bottom drilled on top and painted with black bonds of 30 cm with four numbers high strength of G. I. bolts and nuts of size 10 mm dia. 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing, in ground with cement concrete in M-15 block of size 60 x60x 75 cm as directed by

Insurance

Royalty