Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-AOC | ₹5.8 L Quoted ₹6.2 L | L1 | Accepted-AOC Accepted as L1 |
| 2 | L2₹8.8 LRejected-AOC | ₹8.8 L | L2 | Rejected-AOC other than L1 |
| 3 | L3₹8.8 LRejected-AOC | ₹8.8 L | L3 | Rejected-AOC other than L1 |
| 4 | L4₹10.9 LRejected-AOC | ₹10.9 L | L4 | Rejected-AOC other than L1 |
| 5 | L5₹12.6 LRejected-AOC | ₹12.6 L | L5 | Rejected-AOC other than L1 |
| Sl No | Description | Qty | Unit | ASIA ENTERPRISES L5 | M/S JIWAN SINGH L3 | MS ENGINEERS AND CONTRACTORS L6 | M/S AKHILESHWAR ASSOCIATES L2 | AMAR MOTOR GARAGES L4 | narayan construction L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking out and disconnecting electric connection of voltage stabilizer from LT panels and transporting it to workshop for repair and back to station after repair to be carried out under item No-'2' here-in-after inclduing loading and unloading the voltage stabilizer of capacity 10 KVA to 75 KVA all as directed. | 16 | Each Job | 3,000 ₹48,000 | 1,000 ₹16,000 | 3,750 ₹60,000 | 2,700 ₹43,200 | 2,194 ₹35,104 | 2,000 ₹32,000 |
| 2.00 | Dismantling/unassembling the voltage stabilizer by taking out tranformer oil and storing for reuse after cleaning and removing moisture from it taking all the assembly of voltage stabilzer and removing /repairing the unserviceable parts resassembling it after repair including painting of stablizer testing and commissioning the voltage stabilizer of capacity 10 KVA to 75 KVA unbalanced type . Note :- spares reqd in the work shall be measured and paid separately here-in-after under relevent items of this schedule 'A'. | 16 | Each Job | 3,000 ₹48,000 | 1,000 ₹16,000 | 5,760 ₹92,160 | 3,000 ₹48,000 | 5,500 ₹88,000 | 2,000 ₹32,000 |
| 3.00 | Supply only sensing/control card for voltage start from capacity 10 to 500 KVA. | 14 | Each | 2,000 ₹28,000 | 2,000 ₹28,000 | 2,430 ₹34,020 | 2,100 ₹29,400 | 4,500 ₹63,000 | 2,500 ₹35,000 |
| 4.00 | Supply only carbon bushes for capacity 10 to 500 KVA (set of three) of make as per make actual requirement and as per sample approved. | 15 | Each | 1,000 ₹15,000 | 450 ₹6,750 | 989 ₹14,835 | 600 ₹9,000 | 478 ₹7,170 | 250 ₹3,750 |
| 5.00 | Supply only servo motor capacity 10 to 40 Kg-Cm, 60RPH at 240 volt of capacity 10 to 500 KVA, 50 Hz of make as actually reqd and as per sample approved and as directed. | 15 | Each | 5,000 ₹75,000 | 6,500 ₹97,500 | 11,745 ₹1.8 L | 7,000 ₹1.1 L | 3,400 ₹51,000 | 3,000 ₹45,000 |
| 6.00 | Supply only push button as per sample approved and as directed. | 12 | Each | 300 ₹3,600 | 100 ₹1,200 | 360 ₹4,320 | 250 ₹3,000 | 349 ₹4,188 | 25 ₹300 |
| 7.00 | Supply only voltmeter 0-500V range square shape 96mm as per sample approved and as directed. | 15 | Each | 500 ₹7,500 | 500 ₹7,500 | 1,800 ₹27,000 | 1,450 ₹21,750 | 1,900 ₹28,500 | 1,000 ₹15,000 |
| 8.00 | Supply only Ammeter 0-100/0-200/5A square shape 96 mm or as per sample approved and as directed. | 14 | Each | 500 ₹7,000 | 550 ₹7,700 | 1,620 ₹22,680 | 1,150 ₹16,100 | 1,800 ₹25,200 | 1,000 ₹14,000 |
| 9.00 | Supply only selector switch of make as per sample approved and as directed. | 12 | Each | 400 ₹4,800 | 600 ₹7,200 | 180 ₹2,160 | 125 ₹1,500 | 1,145 ₹13,740 | 200 ₹2,400 |
| 10.00 | Supply only toggle switch of make as per sample approved and as directed. | 11 | Each | 200 ₹2,200 | 200 ₹2,200 | 90 ₹990 | 75 ₹825 | 130 ₹1,430 | 200 ₹2,200 |
Updated dates
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
26 Mar 2026, 6:00 pmClosed
GE (N) Akhnoor
GE (N) Akhnoor C/O 56 APO PIN-181201
COMPREHENSIVE REPAIR MAINT OF SERVO VOLTAGE STABILIZERS PAINTING WORK EARTHING TO VOLTAGE STABILIZERS DEHYDRATION OF OIL AND CONNECTED ITEMS AT AKHNOOR UNDER GE N AKHNOOR
2026_MES_754294_1
GE(N)/AKH-84/2025-26
Open Tender
Civil Works
180 days
Akhnoor
Class E Cat b i
8 documents required · 8 mandatory
₹500
GE (N) Akhnoor
₹28,000
Yes
20 May 2026
26 Feb 2026
28 Mar 2026
26 Feb 2026
26 Mar 2026
12 Mar 2026
Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed
Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed.
Description all as per item No.02 above, but except bricks, all as specified and directed.
Taking down cement plaster of any description on stone or brick walls etc. including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.
Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.
Rendering 15mm thick on fair faces of brick work or cement concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.
Rendering 5mm thick cement plaster with cement mortar(1:4) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified and as directed.
Repair to roof projection/chajjas/facia incl soffit of chajjas by taking down old rendering and providing 15mm thick rendering in CM 1:4 including making edges and corners smooth and rounded including necessary formwork and scaffolding work up to height of 7.0m complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.
Applying 2mm thick wall care putty over newly plastered / old plastered surfaces of wall, complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper including one coat of alkali resistant primer complete all as specified and as directed.
Preparation of previously plastered or unplastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed.
Preparation of old painted surfaces by washing, rubbing down and stopping of distempered or painted walls and applying one coat of cement base paint white or tined, complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.
40mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring including finishing the top surface even & smooth, using extra cement complete all as specified .
50mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in bays with mastic filling in joints complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.
PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
Sand cushioning in flooring below interlocking tiles laid in layers 25mm thick complete all as specified and directed.
Machine pressed precast concrete interlocking paver block of any shape and size approved by EIC, ISI marked (IS:15658-2006) 60mm thick, M-35 grade , in paths and hardstanding,with grey cement and coloured pigment, laid tightly over and joints filled with dry sand. (Colour and pattern as approved by GE) complete all as specified and directed.
Chequered cement concrete tiles 300x300x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match shed of tiles, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
PCC 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles including necessary form work complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tiles exceeding 0.11 Sqm but n.exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement laid over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.
Description all as per item No.25 here-in-before, but in vertical surfaces such as skirting/dado fixed over & including 10 mm thick rendering in cement and sand mortar 1:4, complete all as specified and directed.
Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick back coat layer plaster in cement mortar 1:4,complete all as specified and as directed.
Vitrified ceramic tiles (Light shade) 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors, set and jointed in neat cement slurry and pointed in white/coloured cement to match with shade of tiles including 15mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.
Description all as per Item No 28 here-in-before, but in skirting/dado over and including 10mm thick rendering in CM 1:4.
Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons,walls etc, complete all as specified and directed.
20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed. Note:-(Size of Kota Stone slab shall be 52 cm x 52 cm).
-Ditto- All as per item No 31 above but in skirting/dado fixed over and including 10mm thick plaster in CM (1:4), complete all as specified and directed.
20 mm thick makrana white marble as in border/cooking platform etc, bedded and jointed over 20mm thick screed in cement mortar 1:6 including pointing in white cement 1:2 using marble dust including cutting and polishing complete all as specified and as directed.
20mm thick granite work (table rubbed and polished) as in cooking platform etc, bedded and jointed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite complete all as specified and directed.
Dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed.
Dismantling timber scantlings (framed work) 40 Sqcm and over in section, in any position complete all as specified and as directed.
Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W(Gde E-250), quality 'A' complete all as specified and as directed.
Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa s in roof covering/cladding to wall, valley gutter, ridge & similar works fixed with self tapping screws complete all as specified and as directed.
Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets GI framework complete all as specified and directed.
4mm thick prelaminated designer ceiling board over & including GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm fixed along wall perimeter, main runner 'T' of size 25x40x3mm , secondary runner 'T' of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels, complete all as specified and as directed.
PVC wall lining/panelling consisting of 5mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame including 5mm thick pvc sheet filet of width 35mm to make pvc frame as per manufacturers instruction and drawings, complete all as specified and directed.
5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing
Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) fixed and repairs complete all as specified and directed.
20 mm dia bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe fixed in repairs complete all as specified and directed.
Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) 3 layer hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.
Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) 3 layer hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed.
Taking down of shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each complete all as specified and as directed.
Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed.
35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified.
35mm thick 2nd class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc devided into square with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.
Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed.
Factory made solid panel PVC door shutter/ cupboard shutter/ kitchen cabinets 30mm thick style wooden texture consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed.
Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.
250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.
150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.
Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed.
Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width , ISI marked fixed in repairs, complete all as specified and as directed.
300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, fixed in repairs complete all as specified and as directed.
Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & glazed shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 . Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid seperately under respective item
Factory made box type steel ventilators top hung shutter shutters glass/glazed including guard bars ,hinges,steel handle,tower bolt and steel peg stay,complete with or without glazing bars ,devotiled or welded,including one coat of red oxide primer complete shown as drawing No (CEUZ/TD/1517/15 Sh No 1/3 to 3/3)
Hacking out old broken glass (any thickness, size, quality or description) from metal frames/Aluminium frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.
Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs, complete all as specified and directed.
Preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer, complete all as specified and as directed.
Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of Ist quality over a coat of pink primer,complete, all as specified.
Item Rate BoQ
BoQ_Ver3.0
Bidder Name :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Taking out and disconnecting electric connection of voltage stabilizer from LT panels and transporting it to workshop for repair and back to station after repair to be carried out under item No-'2' here-in-after inclduing loading and unloading the voltage stabilizer of capacity 10 KVA to 75 KVA all as directed.
Dismantling/unassembling the voltage stabilizer by taking out tranformer oil and storing for reuse after cleaning and removing moisture from it taking all the assembly of voltage stabilzer and removing /repairing the unserviceable parts resassembling it after repair including painting of stablizer testing and commissioning the voltage stabilizer of capacity 10 KVA to 75 KVA unbalanced type . Note :- spares reqd in the work shall be measured and paid separately here-in-after under relevent items of this schedule 'A'.
Supply only sensing/control card for voltage start from capacity 10 to 500 KVA.
Supply only carbon bushes for capacity 10 to 500 KVA (set of three) of make as per make actual requirement and as per sample approved.
Supply only servo motor capacity 10 to 40 Kg-Cm, 60RPH at 240 volt of capacity 10 to 500 KVA, 50 Hz of make as actually reqd and as per sample approved and as directed.
Supply only push button as per sample approved and as directed.
Supply only voltmeter 0-500V range square shape 96mm as per sample approved and as directed.
Supply only Ammeter 0-100/0-200/5A square shape 96 mm or as per sample approved and as directed.
Supply only toggle switch of make as per sample approved and as directed.
S&F new dimmer assembly complete with super enamelled copper winding wire of existing gauge inclduing insulating material for winding voltage stabilizer of capacity 25 to 100 KVA all as specified and directed.
S&F new dimmer assembly complete with super enamelled copper winding wire of existing gauge inclduing insulating material for winding voltage stabilizer of capacity 200 to 500 KVA all as specified and directed.
Rewinding of stabilizer of rating 200 to 500 KVA with copper enamelled wire and other winding material inclduing insulator as per existing gauge including use of necessary insulating materials, varninshing preheating at chamber as directed.
Rewinding of stabilizer of rating 10 to 150 KVA with copper enamelled wire and other winding material inclduing insulator as per existing gauge including use of necessary insulating materials, varninshing preheating at chamber as directed.
PVC insulated Wiring with suitable copper conductor of required size and sample approved including accessories for wiring of voltage stabilizer of capacity 10 to 500 KVA all as specifed and directed.
Supply and replacement of gear assembly for stablizer of rating 10 to 100 KVA complete all as specified and directed.
Supply and replacement of gear assembly for stablizer of rating 150 to 500 KVA complete all as specified and directed.
Supply only transformer oil for top up of servo voltage stablizers/transformers all as specified and directed.
Supply only self adhesive PVC insulation tape roll of size width 19mm length 15 Mtr complete all as specified and directed.
Copper tube terminals thimble bottle/pin/type of size 95 Sqmm complete all as specified and directed.
Aluminium tube terminals (thimbles) of size 70 Sqmm to 150 Sqmm complete all as specified and directed
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
Tender84.pdf
Tender Documents • 1.07 MB
BOQ_844858.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid