GE (N) P/TOKEN- 51 OF 2022-2023 SPL REPAIRS OF ROOF AND WALLS OF BLDG NO T-3 (RATION STORE AND BN STORE) OTM ACCN OF 101 INF BN (TA) MARATHA LI AND MW WORKS IN THE AREA OF AGE B/R (EAST) UNDER GE (NORTH) PUNE

Amount

Dismantling single layer Mangalore pattern tiles or similar tiles in roofing including necessary fillets and similar items and taking out from the site without disturbing existing false ceiling complete all as specified and as directed.

Dismantling timber in scantling, fillets, rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work in any position complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, rafter, purlins etc, under 40 Sqcm in section, unframed work complete all as specified and as directed.

Demolition of Brickwork or stone / block masonry, built in cement mortar dressed stonework and precast concrete articles complete all as specified and as directed

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, plaster complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping on top of wall, bed blocks, lintel band upto 1.5 m. span and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work complete all as specified and as directed.

M&L Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work complete all as specified and as directed.

Supply and fix for rolled mild steel frame work as in grills, doors or gates of angle or other sectioin with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings also fastenings and fixing etc. conforming Fe 290-W(Gde-E-165) quality -B complete all as specified and as directed.

Supply and fix for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 as in batterns for roofs complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc with end of bars shouldered and / or riveted or forged into spike framed guard bars, barred iron doors and similar work conforming to Fe 410-0 or Fe 310-O complete all as specified and as directed.

Supply and fix for rolled Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment etc. conforming Fe 410-W(Gde-E-250) quality-A complete all as specified and as directed. .

Mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square heads at one end and screwed the othere, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and as directed.

M/L 2 coats of synthetic enamel paint over a coat of red oxide primer on newly steel surface including preparation complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L preparation of old painted wooden surfaces plain or moulded surface of any description over 10 cm girth or width, not otherwise described and apply one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for 2nd class hard wood plain fillets, rectangular in section, clean sawn, bull nosed splayed chamfered or rounded on one edge or face, secured with nails, sectional area exc.13 Sq.cm and not exc. 25 Sq.cm complete all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and as directed.

M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 8-9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clipscomplete all as specified and as directed. by Engineer- in -charge. Make:-Gyproc/Armstrong.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed.

M&L for Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster complete all as specified and as directed.

M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and as directed

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and as directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Taking down chowkats or frames exc. 1.5 sq.m but n exc 4 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and as directed

Taking down chowkats or frames n exc. 1.5 sq. m each complete anf refxing again in same opening after complete all as specified and as directed

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and as directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and as directed.

S&F Stainless steel butt hinges medium weight 100mm complete all as specified and as directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other means including filling depessions of scrapped surface with 1.5mm putty and preparation of surface for further treatment and then applying two coats of Oil bound distemper white or tinted over a coat of primer complete all as specified and as dircted by Engr-in -Charge

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and as directed.

M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (40mm graded agg) as in foundations,filling and mass concrete complete all as specified and as directed.

M&L for 40mm thick DPC(Damp proof course) to horizontal or vertical surfaces in cement concrete 1:2:4 type B-0 (using 12.5mm graded agg) incl necessary form work over laying of polythene film 50 micron thick laid on a coat of bitumen primer @ 0.30 to 0.50kg/sqm complete all as specified and as directed.

M&L for RCC (Nominal mix) 1:2:4 type B-1 (using 20mm graded agg) beams, cantilevers, bressummers, lintels incl necessary form work complete all as specified and as directed.

M&L for MS TMT bars 6-8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9mm securing with clips complete all as specified and as directed.

Use & formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves and similar work etc complete all as specified and as directed

M&L for 20mm thick cement plaster in CM 1:6 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of cement base paint on new complete all as specified and as dircted

M&L for 15mm thick cement plaster in CM 1:6 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of OBD over a coat of primer on new surface complete all as specified and as dircted

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of soft/loose soil complete all as specified and directed

Removing excavated material n.exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point of soil complete all as specified and as directed

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out returning in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm soft/loose soil complete complete all as specified and as dircted

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and as dircted

S&F 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as dircted

M&L for cutting chases, pinning in making good to faces where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting n.exc 10cm girth on brick wall complete all as specified and as dircted.

S&F in vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etccomplete all as specified and as dircted Make : Cera/Prayag/Johnson Pedder.

S&F Viterous China bowl urinal flat back, size of 465 x 355 x 265 mm white (miniumum), with grating and union for discharge pipe including flushing cistern, flush pipe and waste pipe complete all as specified and as directed

S&F in 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as dircted. Make : Cera/Prayag/Johnson Pedder.

S&F PVC (SWR) soil, waste and vent pipes, 110 mm dia, in any length , single socketed,jointed with rubber ring joints/adhesive, fixed to wall, with PVC clamps, ISI marked complete all as specified and as directed

S&F PVC (SWR) soil, waste and vent pipes, 75 mm dia, in any length , single socketed,jointed with rubber ring joints/adhesive, laid in trenches or in floors, ISI marked complete all as specified and as directed

S&F PVC (SWR) bends, 110mm bore, any radius complete all as specified and as directed

S&F PVC (SWR) bends, 75 mm bore, any radius complete all as specified and as directed

S&F PVC (SWR) junction single (Single T) equal or 110 mm bore complete all as specified and as dircted

S&F PVC (SWR) junction single (Single T) equal or 75 mm bore complete all as specified and as dircted

S&F PVC vent cowl of 75mm dia complete all as specified and as directed

S&F in two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and as dircted. Make Johnson VIVA new series Cat part No: T4808C or of equivalent

M&L for 15 mm bore fancy type stop cock chromium plated cast copper alloy with wall flange complete all as specified and as directed

S&F in hand shower (health faucet) of ABS body with 1.0m long easy flexible tube in chrome finish and wall hook complete all as specified and as directed by Engr-in-charge. Make : Jaquar Cat No ALE-ESS-585 or of equivalent

S&F towel rail 600mm long of PTMT fixed with and including chrome plated brass screws and wooden /plastic cleats weight not less than 190gms complete all as specified and as dircted

M&L PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as dircted

S&F in aluminium powder coated fancy type decorative type curtain rod 25 mm bore all as specified and as directed.

S&F in aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

M&L for 100mm thick breaking brick or similar hardness materials or boulders to 63 mm gauge as in sub base complete all as specified and as directed

M&L for 75mm thick PCC type B- 2, 1:2:4 (40mm graded aggregate) as in sub base/plinth protection etc complete all as specified and as directed

M&L for Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed or bedding of layer in CM 1:6 complete all as specified and as directed

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and as dircted

M&L for pre polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey pigments over 20mm thick screed bed or beddding of layers in CM 1:6 complete all as specified and as directed

M&L for factory made 100% solid wood plastic composite (WPC) door frame single rebated 90mm x 45mm made from wood plastic composite (Single extruded process) material with density 780kg/ cum complete all as specified and as dircted

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and as dircted .NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site reqd.

S&F in repair aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and as directed by Engineer-in-Charge.

S&F for factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed

S&F for 125mm long aluminium anodised, barrel tower bolts of extruded section and fixed on door complete all as specified and as directed

S&F for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed on door complete all as specified and as dircted

S&F for 100mm size butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, type B-11 fixed on chowkat with brass/stainless steel screws complete all as specified and as dircted

S&F for 125mm size extruded aluminium alloy handles, fabricated type,anodised fixed with screws on doors complete all as specified and as dircted

S&F in pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as dircted Make: Johnson VIVA new series Cat part No: T4801C or of equivalent make as per Appx 'A' as approved by GE.

S&F in chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as dircted. Make: Johnson Eco Cat part No: T3910C or of equivalent make as per Appx 'A' as approved by GE.

S&F in chromium plated hand rail at bath room for senior citizen fixed on wall complete all as specified and as dircted Make: ISI Marked or equivalent

S&F in 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified and as dircted

S & F in brass Chromium plated soap dish , fixed to wall with CP brass screws, complete all as specified and as dircted. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S & F in Brass Chromium plated towel rail complete all as specified and as dircted. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE

S&F in Brass Chromium plated towel ring complete all as specified and as dircted. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE

S & F rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Min weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete all as specified and as directed. MAKE :-SINTEX

M&L for complete removal of existing treatment and applying two coats of OBD over a coat of primer including 1mm thick plaster of paris on plastering of defected existing surfaces complete all as specified and as directed (Note:plastering shall be measured and paid in separately).

M&L for granite (of any type) 18-20mm (table top rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, WHB platform and marble dust with admixture of pigment to match with marble shade including making full curving the edges and dismantling existing floor over 15mm screed bed in CM 1:4 complete all as specified and as directed

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and as directed

M&L for Powder coating anodised aluminium frame for doors,windows, ventilators with one or morerebates (Min thickness of powder coating 50micron) including joining cleat for fixing etc. complete all as specified and as directed

S&F for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m (Minimum thickness of powder coating 50micron) including 5.5mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each panes with necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, locking system, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed

S&F for 40mm dia of Galvanised steel tubes, medium grade screwed down with socket, elbow etc complete all as specified and as directed by Engr-in-Charge

M&L for cutting holes in brick/stone walls in mud or cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required incl necessary scaffolding etc complete all as specified and as directed by Engr-in-Charge

S&F aluminium anodized partition using 'Jindal' aluminium SP/DP section with partly 5mm thick tinted glass with PVC rubber bidding and partly 12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed SP (Single Partition)- 20033, DP (Double Partition) - 20034, glazing clips - 4407

Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories after chasing in brick / stone masonry walls etc, Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame for modular switches, sockets, regulators including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

- Ditto- as per item No 101 One ceiling fan point controlled by one, one way switch 6 Amps and regulator

- Ditto- as per item No 101 One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

'- Ditto- as per item No 102 One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

- Ditto- as per item No 101 One light point controlled by controlled by one, one way switch 6 Amps with additional one light points on the same switch circuit complete all as specified and as directed

- Ditto- as per item No 101 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 pin socket outlet plug point, 6 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed

Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.

Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.

S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.

S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.

Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.

S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed

S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed

Supply only Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/ CFL direct fit lamp, in B-22 cap complete all as specified and as directed

Supply and fixing 20/22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020

Supply and fixing Smart Glow intelligent office lighting recessed LED luminaire 600 mm x 600 mm, 36 Watt with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied, high efficiency PMMA diffuser soft glare free light, complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. Make Philips Type RC383B LED 36S-6500 PSU OD WH PIR

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 30 watt with high power LEDs as light source and electronic driver , necessary mounting arrangements and provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 1.5 metres long GI pipe medium grade bracket of suitable size & shape to light fitting mounting dia, secured and fixed with clamps made out of MS flat iron of size 25mm x 5mm, nuts, bolts etc , as approved, complete all as specified and as directed. Make- Jaquar Cat No LPCRSRT30WXW or equivalent

Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.

S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supplied and fixed Four pole MCCB, Thermal Release Range 63-80 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

Taking down fan, cealing cable end, dismantling blades and removing fan and blades to store from site complete all as specified and as directed.

Supply and fixing ceiling fans (5 Star rated) High speed working on single phase input voltage 140-285 , Sweep- 1200 mm, 350 RPM (±10%) , complete with compact BLDC Motor, blades, down rods, without remote canopy, controlled with regulator and all accessories including making connections with provision of flexible wire 23 /0.0076 three core copper conductor black/ white from ceiling rose/connector to fan complete all as specified & as directed. Make- Havells (Enticer), Orient (Aeroquiet) , Bajaj (Energos),

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, Copper winding of sweep 250mm

Supply and fix ready made outdoor type heavy duty polymer earth pit chamber box of inner size 300mmx300mmx260 mm with provision of entry glands for earthing strip/ GI pipe and cover complete all as specified and as directed by Engineer-in-Charge. (Note sample is kept in GE Ofiice sample room)

M&L for Maintenance Free Grounding Solution set earthing comprising of High tensile low carbon steel rod of 3 Mts length & 17.2 mm dia with 250micron (average) molecularly bonded copper on the outer surface along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. Back-fill compound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground including taking out existing earthing complete all as specified and as directed. Make: JEF Technology or equivalant in True power earthings/Excel fibrotech NOTE :- (a) Rates for Excavation and earthwork in any type of soil/strata, testing on completion, Copper strip 20x3 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. (b) On testing, after completion, if the earth resistance < 3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractor for the material used in earthing

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed

Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays / Pipe etc getting out in Hard dense soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Leveling, Watering and Well ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.

Removing Surplus soils to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required) complete all as specified and as directed.

Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 10 Sqmm 4 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed. NOTE (i) Earthworks, Corrogatted pipe for cable protection, will be measured and paid under appropriate Items. (ii) Steel cable glands of adequate size , aluminium cable socket/ lugs ( bottle/ plate ) of required size at end termination in panel boards/ DBs , & Mild steel flat clamp of size not less than 30x5mm for securing cable pipe along pole , on wall with nut, bolt, washers etc is deemed to be included in the item rate quoated.

Supply and laying Double Wall Corrugated ( DWC ) HDPE pipes of size 50 mm, chemical resistance, flexible, tough along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed.

Supply and fixing LED post top lantern 45 Watt fitting made in die-cast aluminium with innovative glare free indirect lighting distribution & IP 65 protection complete with 3 Mtr GI pipe (medium grade) as in pole of size required to bell mouth of fitting including provision of 1.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required complete all as specified and as directed . Make Bajaj Cat No BRIL 45W LED NW

Supply & erecting Hot-Dip Galvanized (HDG) Octagonal Poles for Street Lighting in single section of 5 Mtr. height ,Top – 70mm dia, Bottom – 130mm dia and 3mm thickness sheet. Base plate of minimum dimension 200mm X 200mm X 12 mm, including foundation bolts (4 nos with 3 nos of nuts and washers in each), with decorative single arm bracket for mounting the light fittings 1000 mm long, bent at an angle of 120 degree, with necessary holding brackets, hold fasts etc, bakelite sheet with one 6A SP MCB and 16 sqmm stud type connector ( 4 Nos) inside the pole at door opening for cable connection, complete all as specified and as directed. NOTE : Earthwork, Cement Concrete for foundation , etc. will be measured and paid under approprite Items. Make: Bajaj Type BOP-5030 or Equivalent as approved by GE.

S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacity 45 watts, pre wired, necessary mounting arrangements including provision of 1.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required complete all as specified and as directed fitting Make Jaquar Cat No LSRT01S060XW or equvalent in Syska, Philips

Supply & Fixing Cable Junction Boxes IP 66/69 “weather proof”, for outdoor installation suitable for cable size 4 core -10 sq.mm of size 130 x 180 x 77mm , including MCB SP 6 Amps, connecting PVC Stud terminals 4 way and pole mounting kit for cable junction box complete all as specified and as directed . Make Hansel Cat No KF 1000 H Note : The rates quoted are inclusive of provision and fixing of suitable lugs and glands for cable connection.

Cutting Existing 25 mm bore steel tubing in position for alteration or additions as per site (each cut measured) in any condition all as specified and as directed

Cutting Existing 25 mm bore gun metal gate valve, cast/ductile screwed down, high pressure with iron wheel handle, Screwed both ends for iron pipe or unions complete all as specified and as directed

S & F XLPE insulated, armoured heavy duty electric cable , strip armoured with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA 'C' curve complete all as per specified and as directed.

Supply and fix for wall mounted LED 18 watts with lumens out put not less than 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BLRB-DB118 & BLRB 18W CWc of make Bajaj or equvalent of make Philips/ Wipro/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed.

S & F for wall/ceiling mounted LED batten tube 10 watts, light fitting, with out put of 1000 lumens, 230 volts with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X010XN or its equvalent in Philips, Wipro, Havells, Bajaj.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and Installation, commissioning of wall mounting air cooled Inverter type split air conditioner electric driven single phase indoor unit and outdoor unit with cordless remote control unit and with in built airioniser and plasma filter for better indoor air quality cutting ,brazing and connecting the copper pipe of size 5/8 inch and 1/4 inch size of pipe and making holes as for passing of copper pipes and electric cables and pressure testing with nitrogen and freon gas vacumising the system and charging the Non CFC refrigerent and testing the complete system for smooth functioning of split AC up to satisfactioning, above 3 star rating, confirming to IS-1391 Para II 1992 herimatically sealed air compressor working with Non CFC refrigerent suitable for wall mounting 6000 Kcal/ hrs 2.0 Ton complete with stand for fixing on wall/ground complete all as specified and as directed.

Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type wall mounted and designed for input variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 5 KVA suitable for AC complete all as specified and as directed.

S & F for copper tubing of size 1/4” for discharge line any make of split AC of capacity 2 ton with insulation sheet of pipe tube type insulation complete all as specified and as directed.

S & F for copper tubes of size 5/8” for Suction line of split AC of capacity 2 ton including insulation sheet of pipe tube type insulation complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with multistranded copper conductor of size 2.5 Sq. mm nominal area and drawn through PVC non metallic rigid PVC casing caping and its accessories including one run of PVC insulated with 2.5 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- four runs of 2.5 sqmm cable,one run of 2.5 sqmm cable and one run of PVC casing caping will be measured as one unit

S & F for new powder coated Mild Steel fabricated stand suitable for outdoor unit of Tower AC of 2.0 TR to install outdoor unit on wall/ floor as required on site with legs and bracing complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with multistranded copper conductor of size 10.0 Sq. mm nominal area and drawn through PVC non metallic rigid PVC casing caping and its accessories including one run of PVC insulated with 10.0 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- four runs of 10 sqmm cable,one run of 10 sqmm cable and one run of PVC casing caping will be measured as one unit

S & F for MCB TPN rated capacity 63 amps, 240 volts breaking capacity 10 KA complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC casing caping and its accessories including one run of PVC insulated 2.5 Sq mm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 2.5 sqmm cable and one run of PVC casing caping and accessories will be measured as one unit

Supply and fix MCB Protected Socket with sheet steel enclosure SRCD(socket residual current device) single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amps MCB single pole complete all as specified and as directed.

S & F for flexible PVC pipe 20mm dia heavy duty from outdoor unit to indoor unit for drain of water complete all as specified and directed.

S&F for sheet metal enclosure MCB DB SPN 4way with 200 Amps without bus bar 240 volts single door with magnetic locking system including necessray provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

S&F for wall mounted fan of size 400mm sweep BEE. Five star rated with brushless direct current motor(BLDC) ISI Marked amd connecting up including provision of cable from ceiling rose or connector to fan complete all as including removal of old UNSV fan and handed over to store yard of AGE E/M (N) complete all as specified and as directed Note :- Quoted rate is deemed to inclusive of stickering/marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-charge.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/S Eknath agencies

Gauri Associates

J P ASSOCIATES

ANIL CONSTRUCTION CO.

THE SAIRAM CONSTRUCTIONS

M/s Asrani and sons

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD

N AND G CONSTRUCTION

Galaxy Construction