REPAIR/RENEWAL OF WOODEN FURNITURE, BED WITH PLYTOP, TABLE CENTRE, SOFA SET, PEG TABLE, TEAPOY AND VARIOUS TABLES, CHAIRS HELD UNDER GE CENTRAL BANGALORE

Amount

BED HARD TOP (FD- 246): Removing the existing Unserviceble/broken/damaged long rail and S & F New 1st class teak wood long rail of size 90x35x1980mm applying two coats of french polishall as specified and as directed by Engineer-in-Charge.

Removing the existing Unserviceble/broken/damaged short rail and S & F New 1st class teak wood short rail of size 60x60x900mm applying two coats of french polish all as specified and as directed by Engineer-in-Charge.

Removing the existing unserviceable/broken/damaged stiffener and provision of new stiffener 1st class teak wood applying two coats of french polish all as per drawing and as directed by Engineer-in-charge.

Removing the existing unserviceable/broken/damaged leg on head board side and S & F 1st class teak wood leg of size 60x60x660mm including french polish all as per drawing and as directed by Engineer-in-charge.

Removing the existing unserviceable/broken/damaged leg on foot board side and S & F 1st class teak wood leg of size 60x60x500mm including french polish all as per drawing and as directed by Engineer-in-charge.

Removing the existing unserviceable/broken/damaged /damaged of head board frame and S & F new head board frame including provision of 12mm dia half cut round teak wood beading all as per drawing and as directed by Engineer-in-charge.

All as per Item No 1.06 above but for foot board frame

Removing the existing unserviceable/broken/damaged 4mm thick plywood from both side of head board frame and S & F new 4mm thick plywood one side teak vennered face for both sides of head board frame including provision of 12mm dia half cut round teak wood beading applying two coats of french polish all as per drawing and as directed by Engineer-in-charge.

All as per Item No 1.08 above but for foot board frame

Removal of existing unserviceble plywood carefully and Supply and fix 12mm thick BWR grade of size 1830x900mm with screws applying two coats of french polish all as directed by Engineer-in-charge.

Tightening of all loose parts of bed hard ply top by suitable means and materials complete as directed by Eng-in-charge. NOTE FOR ITEM NO 1.01 TO 1.10 :- Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

CHAIR EASY WITH CUSHION (FD- 358) : Removal of unserviceable/broken/damaged seat & Hand Rest cushion of Chair Easy cushioned and provision of new seat cushion foam 75mm thick of 32 density cover with leatherised rexine fix on and including provision of 12mm thick plywood commercial to Chair easy cushioned all as per drawing and as directed by Engineer-in-Charge

Removal of unserviceable/broken/damaged back cushion of Chair Easy cushioned and provision of new back cusion foam 50mm thick of 32 density cover with leatherised rexine fix on and including provisiob of 12mm thick plywood commercial of Chair easy cushioned all as per drawing and as directed by Engineer-in-Charge

Tightening of all loose parts of Chair Easy Cushioned by suitable means and matarials complete as directed by Eng-in-charge NOTE FOR ITEM NO 2.01 TO 2.03 :- Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

CHAIR DINING LONG BACK (FD- 357) Removal of unserviceable/broken/damaged seat cushion of Chair Dining Long Back and provision of new seat cushion of 32 density covered with leatherised rexine fixed on 12mm with plywood commercial of Chair Dining Long Back all as per drawing and as directed by Engineer-in-Charge

Removal of unserviceable/broken/damaged back cushion of Chair Dining Long Back and provision of new back foam 50mm thick of 32 density covered with leatherised rexine to fix on 12mm with plywood commercial of Chair Dining Long Back all as per drawing and as directed by Engineer-in-Charge

Tightening of all loose parts of Chair dining long back FD-357 by suitable means and materials as directed by Eng-in-charge. NOTE FOR ITEM NO 3.01 TO 3.03 :- Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

SIDE BOARD Removal of existing old unserviceable/broken/damaged top and S&F new top of side board made out of 18/19mm thick prelaminated particle board duly providing 6mm thick teak wood beading/edging half round all round the top including finished by applying french polished complete.

Removal of existing old unserviceable/broken/damaged shutters and S&F new Shutter made out of prelaminated particle board exterior grade size of 220mm x 435mm x 18mm thick including 4 mm thick shisham wood beading all around fixed with continuous/ piano type hinge 40mm wide .

Removal of existing old unserviceable/broken/damaged drawer and S&F new Drawers made out of prelaminated teak faced pre laminated particle board shown on drg.

Replacement of old damaged Aluminium anodized knob with best quality 25mm size knob.

Removal of existing old unserviceable/broken/damaged bottom and S&F new Bottom of side board made out of pre laminated particle board of 18mm applying .

Removal of existing old unserviceable/broken/damaged sides and S&F new Sides of side board made out prelaminated particle board of 18mm .

Removal of existing old unserviceable/broken/damaged legs and S&F new Front and rear leg including long and side rail frame fabricated out of shisham wood all as per shown on drg.

Removal of existing old unserviceable/broken/damaged plywood and S&F new Plywood 6mm thick commercial on back side of the side board .

French polishing on surfaces of wood of side board width or girth including cleaning and preparing the surface including one coat of wood filler on new works with two coats.

Tightening of all loose parts of side board by suitable means and materials complete as directed by Eng-in-charge. NOTE FOR ITEM NO 3.01 TO 3.03 :- Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

TABLE DINING 6 PERSON (239/273) :- Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 5.01 above but for Front Rail

All as per item No 5.01 above but for Side Rail

All as per item No 5.01 above but for Centre Stiffner

Tightening of all joints of dining table by means of fixing with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs, short rail to legs after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with wax and applying two coats of french polish to complete item all as specified and as directed by Engr-in-Charge.

TABLE DINING 8 PERSON (239/237) :- Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 6.01 above but for Front Rail

All as per item No 6.01 above but for Side Rail

All as per item No 6.01 above but for Centre Stiffner

Tightening of all joints of dining table by means of fixing with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs, short rail to legs after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with wax and applying two coats of french polish to complete item all as specified and as directed by Engr-in-Charge.

TABLE DINING 4'x3' (1200x900x760mm) Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 7.01 above but for Front Rail

All as per item No 7.01 above but for Side Rail

All as per item No 7.01 above but for Centre Stiffner

Tightening of all joints of dining table by means of fixing with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs, short rail to legs after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with wax and applying two coats of french polish to complete item all as specified and as directed by Engr-in-Charge.

TABLE 3'x2' WITH AND WITHOUT DRAWER ( 900x600x760mm) Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 8.01 above but for Front Rail

All as per item No 8.01 above but for Side Rail

All as per item No 8.01 above but for Centre Stiffner

All as per item No 8.01 above but for Drawer made out 12mm thick 1st class teak wood and 6mm thick plywood BWR grade for bottom.

Tightening of all joints of dining table by means of fixing with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs, short rail to legs after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with wax and applying two coats of french polish to complete item all as specified and as directed by Engr-in-Charge.

TABLE 900x900x760MM Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 9.01 above but for Front Rail/Side Rail

TABLE WRITING OF SORTS:- Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 10.01 above but for Front Rail

All as per item No 10.01 above but for Side Rail

All as per item No 10.01 above but for Centre Stiffner

All as per item No 10.01 above but for Drawer made out 12mm thick 1st class teak wood and 6mm thick plywood BWR grade for bottom

All as per item No 10.01 above but for Door shutter made out of 18/19 mm thick prelaminated particle boards exterior grade fixed with continuous/ piano hinges 40mm flap upto shutter height with wooden screws and providing 1st class teak wood beading all round the shutters as directed

All as per item No 10.01 above but for Sides of table writing made out of 18/19 mm thick premlaminted particle board duly fixed with wooden screws

All as per item No 10.01 above but for Back side made out of 6mm thick plywood to be fixed as per drawings

Tightening of all joints of dining table by means of fixing with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs, short rail to legs after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with wax and applying two coats of french polish to complete item all as specified and as directed by Engr-in-Charge.

TEAPOY Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 11.01 above but for Front/ side Rail

All as per item No 11.01 above but for Stiffner

Tightening of all joints of dining table by means of fixing with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs, short rail to legs after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with wax and applying two coats of french polish to complete item all as specified and as directed by Engr-in-Charge.

TABLE CENTRE Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 12.01 above but for Front Rail

All as per item No 12.01 above but for Side Rail

All as per item No 12.01 above but for Stiffner

All as per item No 12.01 above but for Centre Stiffner

Tightening of all joints of dining table by means of fixing with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs, short rail to legs after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with wax and applying two coats of french polish to complete item all as specified and as directed by Engr-in-Charge.

PEG TABLE Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 13.01 above but for Front/side Rail

Tightening of all joints of dining table by means of fixing with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs, short rail to legs after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with wax and applying two coats of french polish to complete item all as specified and as directed by Engr-in-Charge.

STOOL DRESSING Dismantling the unserviceable/broken/damaged legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 14.01 above but for Front Rail

All as per item No 14.01 above but for Side Rail

All as per item No 14.01 above but for Side/Centre Stiffner

Tightening of all joints of dining table by means of fixing with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs, short rail to legs after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with wax and applying two coats of french polish to complete item all as specified and as directed by Engr-in-Charge.

Removal of existing old unserviceable/broken/damaged top Table dining 6 persons and S&F new top made out of 18/19mm thick prelaminated particle board including providing 6mm thick teak wood beading/edging half round all round the table top and applying french polished complete all as directed.

All as per item No 15.01 above but for Table dining 8 persons

All as per item No 15.01 above but for Table 3'x2' without drawer/with drawer

All as per item No 15.01 above but for Table writing

All as per item No 15.01 above but for Table 900x900x760mm

All as per item No 15.01 above but for Teapoy

All as per item No 15.01 above but for Peg table

All as per item No 15.01 above but for Table Centre

All as per item No 15.01 above but for Table Dining (size 4'x3')

All as per item No 15.01 above but for Table (size 2'x2')

CHAIR EASY (FD- 20/17/229) : Dismantling the unserviceable/broken/damaged rear legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 16.01 above but for Front leg

All as per item No 16.01 above but for Seat frame side rail

All as per item No 16.01 above but for Front rail

All as per item No 16.01 above but for Rear rail

All as per item No 16.01 above but for Top rail of back frame

All as per item No 16.01 above but for Bottom rail of back frame

All as per item No 16.01 above but for Arm rest

Tightening of all loose part of chair easy with bamboo pins NOTE FOR ITEM NO 16.01 TO 16.09 : Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

CHAIR WRITING (FD-20/202/280) Dismantling the unserviceable/broken/damaged rear legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 17.01 above but for Front leg

All as per item No 17.01 above but for Seat frame side rail

All as per item No 17.01 above but for front rail

All as per item No 17.01 above but for Rear rail

All as per item No 17.01 above but for Stiffner

All as per item No 17.01 above but for Arm rest

Tightening of all parts of chair writing with bamboo pins NOTE FOR ITEM NO 17.01 TO 17.08 :- Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

CHAIR DINING/CHAIR DINING (MAP) (FD-16/288/79, FD/E6/MAP/10) Dismantling the unserviceable/broken/damaged rear legs and supply & fix with new leg made out of 1st class teak hard wood joints to be fixed with Bamboo pins wooden screws, applying two coats of french polish complete all as specified and as directed by Engr-in-Charge.

All as per item No 18.01 above but for Front leg

All as per item No 18.01 above but for Seat frame side rail

All as per item No 18.01 above but for front rail

All as per item No 18.01 above but for Rear rail

All as per item No 18.01 above but for Stiffner

Tightening of all parts of chair dining / chair CBB with bamboo pins NOTE FOR ITEM NO 18.01 TO 18.07 :- Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

Taking down unserviceable/broken/damaged cane from chairs Easy (FD- 17/229) and recaning with best first quality new plastic cane of 1.80mm for seat and 3.50mm for border knitting as per Godrej pattern and as per drawings/and as directed.

All same as item No 19.01 above but for Chair writing (FD-20/202/280)

All same as item No 19.01 above but for Chair dining (FD 288/279)

All same as item No 19.01 above but for Stool Dressing

CHAIR WBB (FD-56, 225 & 285): Removing the existing unserviceable/broken/damaged rear legs of chair WBB & supply and fix new rear legs made of first class hard wood (teak wood) made to shape fixed in position complete all as directed and shown on drawings.

All same as item No 19.05 above but for Front leg

All same as item No 19.05 above but for Seat frame side rail

All same as item No 19.05 above but for Front rail

All same as item No 19.05 above but for Rear rail

All same as item No 19.05 above but for Stiffner

All same as item No 19.05 above but for Tightening of all parts of chair WBB with bamboo pins NOTE FOR ITEM NO 19.05 TO 19.10 :- Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

Removing the existing unserviceable/broken/damaged seat, supply and fix new seat made out of 6mm thick plywood one side teak face of BWR grade fixed with screws all as directed and shown on drawing.

SOFA SET FD-281/373, FD/ MAP-II/02 Removal of unserviceable/broken/damaged seat and back tapestry cloth and UNSV cushion of 3 seatersofa set and S & F new cushion size 550mm x 530mm x100mm thick of 32 density duly covered with tapestry cloth of approved make/shade duly providing best quality zip all as specified and shown in drawing and as directed by Engr-in-charge

All as per item ser No 20 above but for sofa set 4 seater.

All as per item ser No 20 above but for sofa set 5 seater.

SOFA SET FFD-281/373/ FD/ MAP-II/ 02 Removal of unserviceable/broken/damaged seat and back tapestry cloth of 3 seater sofa set and S & F new tapestry cloth of approved make/shade duly providing best quality zip all as specified and shown in drawing and as directed by Engr-in-charge

All as per item ser No 23 above but for sofa set 4 seater.

All as per item ser No 23 above but for sofa set 5 seater.

SOFA SET FD-281/ 373/ 258 Removing the existing unserviceable/broken/damaged rear legs of sofa set and supply and fix new legs made out of 1st class teak wood made to shape fixed in position complete all as directed and shown on drawings.

All as per item No 26.01 above but for replacement of Front leg

All as per item No 26.01 above but for replacement of Front rail of three seater

All as per item No 26.01 above but for replacement of Front rail of single seater

All as per item No 26.01 above but for replacement of Stiffner of three seater

All as per item No 26.01 above but for replacement of Stiffner of single seater

All as per item No 26.01 above but for replacement of Arm rest

All as per item No 26.01 above but for replacement of Ply wood 10 mm thick for three seater

All as per item No 26.01 above but for replacement of Ply wood 10 mm thick for single seater

Chair dining JCO's/OR (FD/MAP-II/05) Removing the existing unserviceable/broken/damaged rear leg of chair dining and supply and fix new leg made out of first class hard wood (teak wood) made to shape fixed in position complete all as directed and shown on drawings.

All as per item No 27.01 above but for replacement of Front leg

All as per item No 27.01 above but for replacement of Seat frame side rail

All as per item No 27.01 above but for replacement of front rail

All as per item No 27.01 above but for replacement of Rear rail

All as per item No 27.01 above but for replacement of Stiffner

All as per item No 27.01 above but Tightening of all parts of chair dining with bamboo pins NOTE FOR ITEM NO 27.01 TO 27.06 :- Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

Chair dining JCO's/OR (FD/MAP-II/05) Taking down unserviceable/broken/damaged PVC Seat from chairs and supply and fix best quality new PVC Seat 4mm thick with holes & screwed with rails as per drawings all as specified and as directed. Make : AMKO or equivalent as approved by GE.

Chair Dining (FD/E6/MAP/10 (R) Removing the existing unserviceable/broken/damaged rear leg from chair dining and supply and fix new leg made out of first class hard wood (teak wood) made to shape fixed in position complete all as directed and shown on drawings.

All as per item No 28.01 above but for replacement of Front leg

All as per item No 28.01 above but for replacement of Seat frame side rail

All as per item No 28.01 above but for replacement of Front rail

All as per item No 28.01 above but for replacement of Rear rail

All as per item No 28.01 above but for replacement of Stiffner

All as per item No 28.01 above but Tightening of all parts of chair dining with bamboo pins NOTE FOR ITEM NO 28.01 TO 28.06 :- Unit rate quoted shall deemed to be inclusive of scrappig the old polish after filling the cracks, joints and uneven surfaces with wax and then application of two coats french polish to complete item as specified and directed by Engineer-In - Charge

Chair Dinning Officer FD/E6/ MAP/10(R) ; Removal of existing unserviceable/broken/damaged seat cushion including tapestry cloth of Chair Dining (MAP) and provision of new seat foam cushion 75mm thick of 32 density duly covered with tapestry cloth of approved make/shade fixed on and including replacing of 12mm thick commercial plywood all as per drawing and as directed by Engineer-in-Charge

Removal of existing unserviceable/broken/damaged seat of tapestry cloth of Chair Dining (MAP) and provision of new tapestry cloth of approved make/shade fixed on existing 12mm thick commercial plywood all as per drawing and as directed by Engineer-in-Charge

CHAIR VERANDAH (FD-19(M)/ 256/ 359) Taking down unserviceable/broken/damaged cane from chair verandah and re-caning with best quality new plastic cane of 3.50 mm/ 4 mm wide plastic cane knitting as per Godrej pattern including applying one coat of white synthetic enamel paint of superior quality to chairs framework all as directed by Engineer-in-Charge

CHAIR VERANDAH (FD-19(M)/ 256/359,FD/MAP-II/15,06) Continuous welding in 20mm dia MS tube at hand rest frame joint, seat frame joint, back frame joint and seat to back frame stiffener joint of chair verandah all as per drawing duly painting the affected portion with two coats of synthetic enamel paint(White) over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge

CHAIR VERANDAH (FD-19(M)/ 256/359,FD/MAP-II/15,06) Provision of PVC bush hard of white colour approved make, fixed to legs of chair varandah including taking down old one all as directed by Engineer-in-Charge.

TABLE BED SIDE FD-248/276: Removal of existing unserviceable/broken/damaged top and provision of new top made out of 18mm thick prelaminated particle board one side teak and other side balancing white including providing 4mm thick teak wood edging alround all as per drawing and as directed by Engineer-in-charge.

Removal of existing unserviceable/broken/damaged side and provision of new side made out of 18mm thick prelaminated particle board one side teak and other side balancing white including providing 4mm thick teak wood edging alround all as directed by Engineer-in-charge.

Removal of existing unserviceable/broken/damaged bottom and provision of new bottom made out of 18mm thick prelaminated particle board one side teak and other side balancing white all as per drawing and as directed by Engineer-in-charge.

Removal of existing unserviceable/broken/damaged shelf and provision of new shelf made out of 12 mm thick prelaminated particle board one side teak and other side balancing white including providing 4mm thick teak wood edging all as per drawing and as directed by Engineer-in-charge.

Removal of existing unserviceable/broken/damaged back plywood and provision of new plywood 6 mm thick BWR grade to back of table bed side all as per drawing and as directed by Engineer-in-charge.

Removal of existing unserviceable/broken/damaged damaged/broken legs and provision of new legs made out of 1st class hard wood (teak wood) 50mmx25mm cross section and 100mm hight all as per drawing and as directed by Engineer-in-charge.

TABLE DRESSING GENTS WITH MIRROR :- Removing the existing unserviceable/broken/damaged /broken mirror and S&F mew mirror of 5.5mm of thick and size of 760x380mm complete all as specified and shown on drawings

Removing the existing unserviceable/broken/damaged frame of mirror and S&F new frame made out of 1st class teak wood and replace worn out/damaged back using 6 mm thick plywood BWR grade complete all as specified and shwon on drawings

Removing the existing unserviceable/broken/damaged table drawer of dressing table and S&F new drawer made out of 12mm thick prelaminated particle board for front, 12mm thick 1st calss teak wood planks for sides and 6mm thick plywood for bottom complete all as specified and shown on drawings

Removing the worn out plywood and S&F plywood BWR grade 6mm thick backing of table dressing frame including tightening of loose components using wooden screws complete as specified and directed NOTE FOR ITEM NO 33.01 TO 33.04:- Unit rate quoted for all the above items shall be deemed to include for connected minor reparis wherever necessary and one coat of french polishing the repaired Table dressing Gents with mirror.

TABLE DRESSING LADIES WITH MIRROR: Removing the existing unserviceable/broken/damaged damage/broken mirror and S&F new mirror 5.5mm of thick, size 1220x365mm all as specified and shown on drawings

Removing the existing unserviceable/broken/damaged frame of mirror and S&F new 1st class teak wood frame of size 25x18 mm and replace the worn out ply wood with 6mm plywood BWR Grade complete all as specified and shown on drawings

Removing the existing unserviceable/broken/damaged top of table dressing ladies and S&F new top of table dressing ladies made out of 18mm thick prelaminated particle board and providing 4mm thick teak wood beading all round all as specified and shown on drawings.

Removing the existing unserviceable/broken/damaged drawer of table dressing ladies and replacing with new drawer complete all as specified and shown on drawings

Removing the existing unserviceable/broken/damaged sliding glass and replacing with new sliding glass complete all as specified and shown on drawings NOTE FOR ITEM NO 34.01 TO 34.05:- Unit rate quoted for all the above items shall be deemed to include for connected minor reparis wherever necessary and one coat of french polishing the repaired Table dressing Gents with mirror.

HAT STAND WITH MIRROR:- Removing the existing unserviceable/broken/damaged damaged/broken mirror and S&F new mirror 5.5mm of thick, size 300mmx 440 mm all as specified and shown on drawings

Removing the worn out plywood and S&F plywood BWR grade 6mm thick backing for hat stand and 4mm teak face ply wood commercieal in front of hat stand frame including tightening of loose components if any, wooden screws etc complete as specified and directed

Removing the existing unserviceable/broken/damaged aluminium pegs for hat of size 120mmx75 mm and replacing with new Aluminium pegs for hats of size 120mmx75 mm complete all as specified and shown on drawings

Material and labour for preparation of old wood and wood based surfaces by removing stains using sand paper and rectifying the cracks by filling with beewax, rawsin and chalk powder etc, mixed with polish and applying french polish to achieve uniform texture and glossy finish to the following furniture :- (a) Bed with plywood top

(b) Chair dining

(c) Chair Easy

(d) Chair writing

(e) Hat stand with mirror

(f) Peg Table

(g) Table Bed side

(h) Table 3' x 2' with drawer

(j) Table 3' x 2' w/o drawer

(k) Table centre

(l) Table dining 6/8 pers

(m) Table dressing gents with mirror

(n) Table writing

(o) Table dressing ladies with mirror

(p) Teapoy

(q) Table 4'x3'

(r) Book Case/ shelf

(s) Sofa set 5 seater

(t) Sofa set 4 seater

(u) Sofa set 3 seater

(v) Side board

(w) Table 3'x3'

Ms GHOSH AND SONS

BALAJISTEELINDUSTRIES

PRIYADARSHINI CONSTRUCTIONS