WELCOME MAINT TO OFFRS MD ACCN INCLUDING MISC REPAIRS TO VARIOUS BLDG, SECURITY FENCING, FOOTPATH AND OTHER ITEMS OF AREA-I UNDER GE SAUGOR

Amount

M&L for preparation of old decorated surface of walls i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting etc and applying one coat of white wash on wall complete all as specified and directed.

All as per Srl item No.1 above but one coat of white wash on ceiling surface

All as per Srl item No.1 above but two coat of white wash on walls.

M&L for preparation of old wall surfaces by brooming down with steel wire brushes, scrapping down smoke spot moulds, moss efflorescent salts and treating oil and greasy spot,removing of nails , making good holes,cracks,loose scales,etc and applying one coat of oil emulsion distemper including washing of floors, ceaning glass , joinery,electric fittings ,etc to remove splash marks complete all as specified and directed

All as per Srl item No. 4 above but two coats of oil emulsion distemper on walls.

M&L for preparation of old painted wood/ wood based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

All as per Srl item No. 6 above but two coats of synthetic enamel paint on wooden surface.

M&L for preparation of old painted steel/steel based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M & L for complete removal of existing treatment from walls by scrapping & washing etc and applying Birla /J.K. wall care white putty 2 mm thick in two layers for levelling the surfaces including properly making of 'V' shaped crackes and filling of all crackes with crackes seal of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant wall primer complete all as specified and directed

M&L for preparation of old decorated surface of wall/roof by brooming down with steel wire brushes, scrapping down smoke spot moulds, moss efflorescent salts and treating oil and greasy spot,removing of nails , making good holes,cracks, and depression with putty and applying one coat of weather proof exterior paint including washing of floors, ceaning glass , joinery,electric fittings ,etc to remove splash marks complete all as specified and directed . Make: Asian ACE or equivalent make as specified in Appx 'C' of list of makes

M&L for complete removal of existing treatment from walls by brooming down with steel wire brushes, scrapping down smoke spot moulds, moss efflorescent salts and treating oil and greasy spot,removing of nails , making good holes,cracks, and depression with putty and applying two coat of weather proof exterior paint over a coat of alkali resistant wall primer including washing of floors, ceaning glass , joinery,electric fittings ,etc to remove splash marks complete all as specified and directed . Make: Asian ACE or equivalent make as specified in Appx 'C' of list of makes

S&F in repairs 25 mm bore stainless steel pipe curtain rod including stainless steel brackets & decorative dome, suitable for door/widows curtain with fancy type powder coated ms dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each complete all as specified and directed

Taking down shutters of any description not exc 1 Sqm complete all as specified and directed

M&L for second class hardwood plain, solid, straight chowkhat and frames wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints complete all as specified and directed

S&F 30 mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (without sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in MES SSR Part -I , Section 8, Clause 8.20(a) complete all as specified and directed

S&F Solid PVC frame (single rebated) of size 50mm x 47mm made out of wood grain printed PVC sheet reinforced with MS Square tube complete all as specified and directed

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed

S&F powder coated aluminium ventilators partially fixed and partially openable either top hung or side hung and bottom portion fixed having 4mm thick frosted glass and top portion having two shutters external shutter with 4mm thick frosted glass and interal shutter having stainless steel wiremesh 0.36mm dia for Bath / WC including rubber gasket and alumium beading with necessary cleats / locking arrangement complete all as per standard engineering practice including necessary cutting holes on wall and floor (Note:-Aluminium section weighing not less than 0.55kg/m ) complete all as specified and directed

S&F aluminium windows and ventilators sliding type three track powder coated consisting of frame 91.80 mm x 45 mm shutters 39 mm x 18 mm with rollers and locking arrangements with 4 mm thick plain glass with rubber gasket and aluminium beading , Al. handle,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mesh 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS (Al. section thickness 1.50 mm ) complete all as specified and directed

S&F glazed aluminum door powder coated of any colour consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 84.45x44.45 mm , bottom rail & lock rail size is 101.80mm x 44.45 mm & style of door shutter is 83mmx 44.45 mm glazed with 5mm thick tinted /colour glassof approved make with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc complete (aluminum section thickness 2 mm) confirming to IS complete all as specified and directed.

S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F MS butt hinges 100 mm size medium weight, coled rolled and fixed with screws complete all as specified and directed

S&F Stainless steel butt hinges 100 mm and fixed with screw complete all as specified and directed

S&F for 200mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 125 mm fixed with steel screws complete all as specified and directed

S&F 250mm long Aluminium alloy anodised Sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S&F in repairs 18mm/19 mm thick prelaminated particle board, exterior grade,laminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber framed work including liping with fillet including polishing as in cupboards complete all as specified and directed

S&F continuous (piano ) hinge, mild steel bright finish or electro galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F 40mm dia, brass polished, bright finished cupboard knobs fixed with nut, screw and washer as in repairs complete all as specified and directed.

S&F 75 mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F in repairs ball catches magnet type , with striking plate including complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified & directed.

M&L for brick work with sub class 'B' bricks, old size straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed

M&L for walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specifed and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protection surface finished even & smooth using extra cement providing with construction joints 10x20 mm filled with bitumen and sand mortar 1:3 complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in levelling course of sub base finished even and rough to receive the topping layer complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding and removed of rubbish off the premises complete all as specified and directed.

M&L for vitrified Ceramic tiles 10mm thick (square/rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed.

All as per Srl item No.47 above but in dado / skirting laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed

M&L for nonskid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed

M&L for glazed ceramic joint free coloured tiles of size 450mmx300mmx7mm thick on vertical surfaces such as skirting, dado etc., laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles complete all as specified & directed.

M&L for glazed ceramic joint free coloured tiles of size 600mmx300mmx7mm thick on vertical surfaces such as skirting, dado, etc., laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles complete all as specified & directed.

M&L for 18mm to 20 mm thick pre-polished Granite slab, machine cut, for floors/ shelves,cooking platforms window cill, steps, jambs and pillor top laid over 15mm thck CM 1:4 cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone.

M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed.

M&L for mirror polished machine cut Kota stone flooring 18mm to 20mm thick of size not less than 550mmX550mm laid over and including 20mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed

M&L for Kota stone slab 15mm to18mm thick in skirting, dado, etc., laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified & directed.

M&L for cement plaster in two layers on stone masonry surfaces or surfaces other than fair face of brick work ,first layer 15 mm thick in cement mortar (1:6) and second layer cement plaster 10 mm thick in cement mortar (1:4) with WPC @ 3% by weight of cement, finished the surfaces fair and even complete all as specified & directed. Note:-WPC shall be measured and paid seperately under respective item

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished the surface fair and even complete all as specified & directed.

M&L for rendering 10 mm thick on ceiling in cement mortar (1:3), finished the surfaces fair and even complete all as specified & directed.

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl of walls complete all as specified and directed . Make: Asian ACE or equivalent make as specified in Appx 'C' of list of makes

M&L for preparation of newly plastered surfaces of wall and applying 2mm thick Birla / J K wall care white putty on walls and applying two coat of interior Acrylic emulsion over a coat of alkali resistant primer complete (internal wall) complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed.

S&F in replacement 15mm bore Galvanised mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in replacement 20mm bore Galvanised mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend complete all as specified and directed.

S&F in repairs single piece white ceramic glazed wall mounted/floor mounted water closet of and concealed cistern flush tank including slow motion seat cover ,CP rack bolt-screw pair, inlet&outlet rubber gaskets weigth not less than 20kg complete all as specified and directed (Make : Brand Generic, Jaquar or equivalent make as specified in Appx 'C' of list of makes )

S&F in repairs vitreous Chinaware EWC pedastal type closet white with 'P' trap, seat & cover with flat bottom with hinging device complete all as specified and directed

S&F in repairs vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) and including connection to trap & to flushing pipe anti syphonage pipe etc (excluding flushing cistern) complete including making good to floor complete all as specified and directed.

S&F in repairs vitreous China WHB white flat back size 550mm x 400mm with and including MS brackets, CP pillar tap fancy type - 01 No of 15mm bore, CP waste coupling 32mm dia, 32mm dia PVC waste pipe of suitable length and PVC connections 15 mm size with PTMT nuts of length 450 mm high pressure complete all as specified & directed.

S&F in repairs wall mixture with crutch for mixing hot & cold water, fancy type, chromium plated, screwed for iron pipe or for unions 15mm bore complete all as specified and directed.

S&F as in repairs Single lever basin mixer without popup waste and 450 mm long braided Hoses suitable for 15 mm bore iron pipe complete all as specified and directed. Make :Jaquar Cat No ARI-39001B or equivalent make as specified in Appx 'C' of list of makes

S&F in repairs Hand shower (Health faucet) , one metre long flexible tube & wall hook complete screwed for iron pipe 15mm bore complete all as specified and directed. Make :Jaquar or equivalent make as specified in Appx 'C' of list of makes

S&F in repairs brass chromium plated wall mixer for mixing Hot & Cold water with arrangement of head shower and incuding hand shower ,high pressure, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs chromium plated brass jet sprey suitable for EWC including CP chord complete all asspecified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing with cantilever brackets and connecting union to pipe overall size 915mm x 460mm; bowl size 410mm x 330mm x 160 mm complete all as specified and directed.

S&F in repairs CP bib taps, cast copper alloy, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore complete all as specified and directed.

S&F as in repairs C P Multi bib tap 2 in 1 , cast copper alloy fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore complete all as specified and directed.

S&F in repairs angle valve /stop valve15 mm dia, cast copper alloy, fancy type chromium plated, screwd down, high pressure, screwed both ends for iron pipes or for unions complete all as specified & directed.

S&F in repairs chromium plated pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs concealed stop valve 15mm dia, cast copper alloy, CP fancy type with long shank and cup screwd down, high pressure, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

S&F in repairs brass chromium plated shower rose fancy type, 125 mm size with swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs brass chromium plated WHB mixer for mixing Hot & Cold water high pressure, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs chromium plated brass hand shower 75 mm suitable for wall mixer including CP chord 1m long complete all as specified and directed.

S&F in repairs stainless steel plate rack (utensil rack) of size (600mm x 750 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts fixed in repairs complete all as specified and directed

S&F PVC bath room cabinet with mirror of size 432mm x 311mm complete all as specified and as directed.

S&F in replacement rotational moulded polyethylene water storage tanks capacity 500 litres (cylindrical vertical with closed top) three layered wall construction, ISI marked hoisted and fixed in position complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks capacity 1000 litres (cylindrical vertical with closed top) three layered wall construction, ISI marked hoisted and fixed in position complete all as specified and directed.

S&F PVC connections 15mm bore size 450 in length with both end brass/pvc high quality nuts complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.

S&F in repairs 110mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls with suitable size mild steel clamps complete all as specified & directed.

S&F in repairs 75mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.

S&F in repairs 75mm bore PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with suitable size mild steel clamps complete all as specified & directed.

S&F PVC (SWR) bends 110mm dia complete all as specified & directed.

S&F PVC (SWR) bends 110mm dia with access door complete all as specified & directed.

S&F PVC (SWR) bends 75mm dia complete all as specified & directed.

S&F PVC (SWR) bends 75mm dia with accessable door complete all as specified & directed.

S&F PVC (SWR) 110mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified & directed. .

S&F PVC (SWR) 75mm dia junction, single(single 'T') equal or unequal complete all as specified & directed. .

S&F 110mm bore PVC (SWR) vent cowl complete all as specified & directed.

S&F in repairs toilet paper holder, box type of brass, chromium plated fixed to walls with chromium plated brass screws fixed in repairs complete all as specified and directed

S&F in repairs Stainless steel perforated grating of 100 mm dia dome type complete all as specified and directed.

S&F in repairs tubular towel rail 600 mm long of CP brass 'D' type fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified & directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs plastic water closet seat, white, closed pattern with recessed bottom and cover including mild steel chromium hinging device complete all as specified and directed.

S&F PVC waste pipe 32 mm dia, 60 cm long for WHB with cup, fixed in repairs complete all as specified & directed.

M&L for treatement for sunken portion is as follows :- A. Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. B. M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement in the following sequence:- (a) M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (b) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion) etc. (c) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top. Note :- (a) Testing for water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measured.

S&F in repairs 3mm thick Sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane complete all as speified

S&F in repairs stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonary, etc and making good disturbed ground complete all as specified and directed.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

Excavating in post holes in any type of soil each not exc 0.5 cum getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation, filling, mass concrete, sub-floors, floors complete all as specified and directed.

S&F mild steel Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting or riveting, etc, and similar work and similar conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, includinig cranking, bending spirally for hooping of columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality confirming to Fe-410 W complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or sguare heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or screw nut notexc 5 cm long dia of shank 12 mm complete all as specified and directed.

S&F chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Make:-TATA/SAIL/JINDAL

M&L for painting steel surfaces exc 10 cm in width or girth with two coats of synthetic enamel paint over a coat red oxide primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly steel and iron surfaces of any description not exc 10cm in width or girth when connected with other painting, applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

S&F in replacement Galvanised 2 strand steel barbed wire 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins, etc. as directed (each line wire to be measured) Make:-TATA/SAIL/JINDAL

Surface exacavation not exceeding 30cm deep and average 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping, benching to hold to lower portion of chain link fencing etc including nesessary formwork complete all as specified and directed.

S&F ornamental and decorative type steel gate with structural steel conforming to Fe 290, Gde-E-165 all as specified, revolving on bearing plate including pintal hinges fixed on pillar in PCC blocks of size as required as site , including all locking arrangement, all as per sample approved by the Engineer -in -Charge and dirceted and fixed in position. Note :-1 . The weight of manufactured steel gate shall be measured before fixed in position. Necessary arrangement for weighing the steel gate shall be made by the contractor at his own expense . The contractor shall quote the unit rate accordingly. 2. Steel gate shall be manufactured as per sample approved by the Engineer-in -Charge . 3. Accepting Officer shall also organize a BOO for ascertaining the weight of steel gare as brought by the contractor

M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

All as per Srl item No. 126 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; fair finished surfaces of conrete flat complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished complete all as specified and directed.

M&L for rendering 20mm thick in cement mortar 1:6 on other than fair faces of brick wall or stone masonry surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:4 on brick wall / Concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for applying three coats of white wash on new plastered wall surface including preparation of surfaces complete all as specified and directed. .

M&L for machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006 of 60mm thick, M-35 grade, laid over and including stone dust cusion of 25mm thick complete all as specied and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in surface channes of drain complete all as specified and directed

Dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed.

Dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.

S&F pre- coated coloured galvalume Aluminum Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws complete all as specified and directed.

S&F 0.5 mm thick galvalume sheet pre-coated coloured for ridge or fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws complete all as specified and directed.

Dismantling unframed timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed.

S&F structural steel work as in tubular trusses including special shaped washer complete using ERW or induction butt welded tubes conforming to IS.1161-1979 Grade St.-240 complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc., complete all as specified and directed.

S&F MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment Fe-410W complete all as specified and directed.

S&F 600mmx600mmx4mm thick ‘E’ Board Classic (Make-Everest industries Ltd) Design Lake & hill as in false ceiling including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed including dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness and any description, including cover fillets complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope,finished the surface even and fair without using extra cement complete all as specified & as directed .

M&L for 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified & as directed . Note : WPC shall be measured and paid separately)

M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm including taking down of old roof treatment of any description including mud phushka, lime, concrete, tiles, cement plaster padding upto n exc 20 cm depth from roof surface etc including cleaning, brushing and watering to joints and grooves and removing debris to a distance exc 1.5 km complete all as specified and directed. The height of the roof may upto 9 m comprising with following items:-

The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.

Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3 Kg / sqm composed of 100 micron (+10% ) high density polyethylene sheet (HMHDPE) as center core, which is sandwitched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps100 mm as per manufacture instruction etc.

Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.

M&L for applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed by Engr-in-charge.

M&L for applying two coats of elastomeric-acrylic waterproof protective cum decorative coating on external surface of RCC roof, concrete panels, plastered surface of wall etc. over a coat of primer including preparation of surfaces all as per manufactures instructions complete all as specified and directed.. Make: Dr Fixit (Raincoat) or equivalent make as specified in Appx 'C' of list of makes

S&F in repair wall mixer with telephonic shower arrangement (excluding hand shower), connecting legs and wall flanges but without crutch & telephonic shower complete screwed for iron pipe bore dia 15mm complete all as specified and directed. Make :Jaquar Cat No FLR 5217N or equivalent make as specified in Appx 'C' of list of makes

S&F in repairs overhead shower 120mm round shape single flow (ABS Body chrome plated with Grey face plate) with Rubit cleaning system Make : Jaquar OHS-1789 or equivalent make as specified in Appx 'C' of list of makes

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and directed

M&L for point wiring for the following with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:-

One light point or fan point controlled by one switch

One Call Bell point controlled by one push button switch

5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board all as directed by Engr-in-charge

All as per Srl item No 152 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:-

One light point or fan point controlled by one switch

One Call Bell point controlled by one push button switch

5Amp independent socket point controlled by one switch

One 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No 154 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire

S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed .

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed .

S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed

S&F modular bell push 6A one module complete all as specified and directed

S&F switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.

S&F switch piano type flush, single pole, one way 15 A, 230 V complete all as specified and directed.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed .

S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed

S&F in replacement MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- The quoted rate shall deemed to be included for cutting and chasing in stone masonary and making good the disturbed surfaces

S&F in replacement LED Bulk head 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed

S&F in replacement TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed

S&F in replacement box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed

S&F in replacement socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination complete all as specified and directed

S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed

S&F in replacement laminated super hylem sheet of size 8" x 5" white colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed.

All as per Srl item No 193.00 above but of size 5"x5"

All as per Srl item No 193.00 above but of size 8"x10".

All as per Srl item No 193.00 above but of size 8"x12".

All as per Srl item No 193.00 above but of size 9"x11".

S&F PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring complete all as specified and directed.

S&F PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring complete all as specified and directed.

SHIV SHANKAR MISHRA

dipangashu barick and associates

pal enterprises

M K Construction

SAGAR MOTOR AND TRACTOR CO

M/s arjeet singh ahluwalia

v k builder

A Raza Enterprises

M/s Vinod Kumar Korpal, Sagar