SPECIAL REPAIRS TO TMQ JALAHALLI

Amount

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for all as specified and as directed .

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate aggregate as in flooring finished even and smooth without using extra cement all as specified and as directed .

M&L 38mm width of glass dividing strips, 3mm thick inserted in position, conform to design all as specified and as directed .

M & L for 75mm thick cement concrete 1:3:6 type C-2, using 40mm graded stone aggregate complete finished fair and even as in plinth protection and pavings etc all as specified and directed.

M & L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floors, paving finished even and fair complete all as specified.

M/L Forming Contraction (Dummy) joints 30mm deep x 10mm wide,filled with sealing compound Grade A all as specified and as directed .

Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off the premises all as specified and as directed .

Taking down cement plaster on brick or stone walls and ceilings and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc including brushing neat cement slurry with 3kg of cement per sq. metre all as specified and as directed .

M&L for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on brick work or concrete surfaces as in backing coat to receive wall tiles etc all as specified and as directed .

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

All as per item No 12 herein before but in skirting including necessary cutting of tiles all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed .

M&L for Glazed ceramic coloured tiles of size 300x200mmx7 to 8 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in sub floor and complete all as specified and directed.

M&L 300x300x20mm thick prepolished cement concrete chequered tiles jointed in neat cement slurry with mixture of gray cement and pigment in equal quantity to match the color of tiles including screed bed of 20mm thick in CM (1:6) all as specified and as directed .

Dismantling of Stone slabs and tiles of any description, in any position and thickness in floors, cooking plateform, aprons etc, of laid bedded and pointed in any mortar all as specified and as directed .

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in window cill, cooking platform and over 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations all as specified and as directed .

M & L for racking out joints / pointing to squared rubble masonry, coursed or uncoursed built in cement or cement lime mortar and all as specified and directed.

M & L for flush pointed in CM 1:4 to squared rubble masonry and all as specified and directed.

Dismantling of Asbstos cement (corrugated, semicorrgated including ridge etc) sheets in roof coverings all as specified and as directed .

M & L for Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.(including in ridges) all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed

S&F for Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates of Fe 410 W (Gde E 250)quality B all as specified and directed.

M&L for preparation of new steel surfaces of any description over10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Demolition of brick work, stone massonery, PCC block walling built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed .

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 all as specified and as directed .

M & L for pre-cast cement concrete1 :3 : 6 type C1 using 20mm graded stone aggregate block masonry with solid blocks, exc. 10 cm in width and setting , built in cement mortar 1:6 all as specified and as directed .

Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and as directed .

M&L for rendering 15mm thick out of 15mm thick ,5mm thick in CM 1:4 over 10 mm thick in CM 1:6 mixed with water proofing compound (over external/roof plaster for WPT) for fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. Note : WPC shall be measured & paid seperately.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as internal surfaces of walls all as specified and as directed .

M&L for rendering 5mm thick in CM 1:3 on ceiling,chajja,roof projection etc including finished even and smooth without using extra cement all as specified and directed.

Supply only integral water proofing liquid ISI marked all as specified and as directed .

M&L anodised aluminium powder coated snap grid frame work size 605 x 605 mm for false ceiling all as specified.

S&F hangers 6 mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified.

S&F 6 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws fixed in ceiling flat or sloping.

M&L applying two coats of white washing on new celing boards including preparation of new surfaces all as specified and as directed .

Taking down shutters of any description exceeding 1Sqm, and not exceeding 2 Sqm each and refixing in same opening all as specified and as directed .

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames all as specified and as directed .

All as per item No 41 above but exc 1.5 Sqm but n exc 4 Sqm all as specified and as directed .

Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each all as specified and as directed .

All as per item No 43 above but n exc 1 Sqm all as specified and as directed .

Material & labour for 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, 2nd class hard wood all as specified and as directed .

M & L for plain fillets, square, rectangular or triangular in section wrought, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm all as specified and as directed .

M & L for cutting holes in brick/stone walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of hold fasts or lugs measured from the face of the jamb into the wall exc. half brick but n.exc. one brick all as specified and as directed .

M & L for Forming jambs using cement mortar 1:4, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed .

S&F Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed .

S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) all as specified and as directed .

All as per item No 50 here in before but divided into squares, with plain chamfered or rounded, mitred and ribeted sash bars any numbers as in window shutter 30 mm thick all as specified in SSR Part I Sec 8 Clause 8.24 (b) all as specified and as directed .

All as per item No 51 hereinbefore but with plain chamfered or rounded, mitred beads (without sash bars) as in window shutter 30 mm thick all as specified in SSR Part I Sec 8 Clause 8.24 (b) all as specified and as directed .

S&F 2nd class hard wood 30mm thick panelled shutters (any no of panels) with panels of timber flat on both sides (feather edged or veneered particle board medium density , wood particle board with commercial face veneers all as specified and directed.

Supplying and fixing of PVC door frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm thick rigid PVC foam sheet, mitred cut at two corners and joined with two nos of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm MS square tube of 19 gauge, EPDM rubber gasket, weather seal to be provided through out the frame. The doorframe shall be fixed to the wall using 65/100mm long MS screws through the frame using PVC fasteners. A minimum of four nos of screws to be provided for each vertical member and minimum of two nos of screws for each horizontal member complete as per Manufacturer’s specification and drawing and as directed.

Supply and fixing factory made Solid PVC moulded door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing of particle board core

S & F 100 mm long heavy weight rolled mild steel butt hinges with galvanised mild steel hinge pin all as specified and as directed .

S & F 75 mm long butt hinges, heavy weight, cold rolled mild steel with galvanised mild steel hinge pin all as specified and as directed .

S & F 200 mm long aluminium anodised, barrel tower bolt of extruded section and fixed all as specified and as directed .

S & F 125 mm long aluminium anodised, barrel tower bolt of extruded section and fixed all as specified and as directed .

S & F 150 mm long extruded aluminium anodised alloy handles , fabricated type all as specified and as directed .

S & F 125 mm long extruded aluminium anodised alloy handles , fabricated type all as specified and as directed .

S & F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed all as specified and as directed .

S & F in repair 200 mm long aluminium anodised, barrel tower bolt of extruded section and fixed all as specified and as directed .

S & F in repair 150 mm long extruded aluminium anodised alloy handles , fabricated type all as specified and as directed .

S & F 300mm in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed all as specified and as directed .

S&F in Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture1.18mm and fixed with tinned tracks, or galvanised wire staples or wooden beading all as specified and directed.

S &F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beading in square n exc 0.5 sq. m in each pane and all as specified and directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil all as specified and as directed .

M&L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer and all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description and applying one coats of synthetic enamel paint all as specified and directed.

Taking out steel water tubing and connections of 15 mm dia all as specified and as directed .

All as per item No 71 hereinbefore but 20mm dia all as specified and as directed .

Cutting chases, pinning in, making good to facings where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth in brick walls all as specified and as directed .

Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified.

S&F for CPVC female brass threaded adaptor (FTA/ FBTA) 16 mm outer dia pipe all as specified and as directed .

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps and saddles including taking down existing pipe and fittings all as specified and as directed .

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles including taking down existing pipe and fittings all as specified and as directed .

S & F PVC (SWR) bends of any radius with access door bore of 110 mm bore all as specified and as directed .

S & F PVC (SWR) bends of any radius with access door bore of 75 mm bore all as specified and as directed .

S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of 110 mm bore all as specified and as directed .

S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of 75 mm bore all as specified and as directed .

S & F 110mm bore PVC (SWR) vent cowl all as specified and as directed .

S & F 75mm bore PVC (SWR) vent cowl all as specified and as directed .

S&F in 110 mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed .

S&F in 75 mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed .

S & F in repairs PVC low level flushing cistern 10 Lit capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed

S & F in repairs viterous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified

S&F in repairs vitreous china white wash hand basin flat back size 550x400mm 'includingCI/MS brackets including cutting for and pinning in brackets but excluding waste pipe complete all as specified and as directed .

S & F in repair viterous china squatting pan 'Orissa pattern ' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe antisyphonage pipe etc compete including provn of lime concerte bedding and making good to floor all as specified

S & F in repairs Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms) with long shank and cup ( concealed type ) screwed for iron pipe of 15 mm bore all as specified and as directed .

S&F in repairs 15mm dia Stop valve (angle cock) of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) all as specified and as directed .

S & F in repairs 15 mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm-125gms) all as specified and as directed .

S & F in repairs pillar taps of PTMT any colour high pressure screwed for iron pipe all as specified and as directed (Minimum weight 15mm-110gms)

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demolition of supports etc and making good the destrubed surfaces all as directed.

S&F PVC rotational moulded polyethylene water storage tanks 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I. including dismantling water tanks all as specified and as directed .

S&F Brass ball valve (set) 25mm size ,high pressure with polythene float and fly nut complete screwed for iron pipes fixed all as specified and as directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. necessary new wooden beading complete all as specified.

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and as directed .

S&F in repair grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) all as specified and as directed .

S&F in repairs PVC waste pipe 32mm bore for WHB & Sink all as specified and as directed .

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality-B complete all as specified and as directed .

S & F Mild steel,1mm thick plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and as directed .

M&L for complete removal of existing treatment and chalk whiting, on plastered surfaces, preparatory to distempering and applying two coat of oil emulsion distemper over old decorated wall surfaces of any description including necessary preparation and all as specified and directed by Engr in Charge.

M&L for Preparation of plastered or unplastered old decorated surfaces of walls including cleaning by brooming down scrapping down smoke & moulds efflorescent salts and applying one coat of white wash on walls all as specified

All as per item No 105 here in before but on ceiling surfaces all as specified and as directed .

Material & Labour for preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying three coats of white wash on new surfaces all as specified and as directed .

All as per item No 107 above but on ceiling surfaces.

Material & Labour for preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over coat of primer complete all as specified .

M&L for complete removal of existing treatment and priming plastered and other surfaces with alkali resistant priming paint and preparation of old plastered or un plastered surfaces and walls including cornices, pilasters etc and applying two coat of cement base paint complete all as specified.

M&L for distempering walls with two coats of washable oil emulsion distemper on new surfaes over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified.

M&L for preperation of old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100/110mm dia all as specified and as directed .

Grubbing up plants/vegetation digging out roots , filling of holes of any description upto double storey constr from roof and walls and making good the decayed portion with cm 1:3 mixed WPC including coving using the form work if any finally finished the surface with 15mm cm 1:3 complete all as directed.

Removing existing unserviceable tar felt on any type any description from roof slab alongwith screed bed , cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m from the starting point all as specified & directed

M&L Applying oil bound bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, tearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. and applying a coat of blown bitumen @ 1.20Kg/sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bitiminous Aluminium paint / Primer @10 Kg/Sqm complete all as specified and directed

Taking down carefully any type point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, pendents, regulators , sockets tube lights fitting with all accessories etc.removal of materials from site for keeping in safe custody for taking credit & making good the disturbed surface of wall, floors , ceilig etc to match with the existing surfaces with matching OBD/White wash/ Distemper all as directed.

M & L for surface/ casing caping point wiring using approved colour code as per IS (Red, Black and Green for single phase circuits) with multistrand copper conductor (FRLS) with 1.5 sq mm nominal cross-sectional area, single core, cable 1100 Volts grade ISI-694 marked with valid CM/L No. drawn in medium grade new PVC conduit of dia not less than 20MM and conduit accessories in wall/floor (expect on RCC celling and on roof trusses where conduit shall be on surface ) ISI marked conduit and conduit accessories with mild steel/pressed steel sunkun box (with earth dolly ) sully painted with two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet cover for fixing of switches, sockets including PVC insulated multi-stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continiuty conductor to common earth and connecting to earth dolly complete for one light point controlled by one 5/6 amp one way switch all as specifed and directed.

All as per item No 118 above but for one fan point controlled by one 5/6 amp one switch and one electronic step type regulator all as directed.

All as per item No 118 above but for for one Bell point controlled by one way bell switch SP 5 amp 240V all as directed.

All as per item No 118 above but for for one Switch socket outlet five pin 5/6 amp independent board controlled by one 5/6 amp one switch all as directed.

All as per item No 118 above but for for one 5 pin, 5 Amp socket point with other switch on the same board all as directed.

All as per item No 118 above but for but with 2.5sqmm un sheathed multistranded cable for one socket outlet 15 Amps indipendent including continuous copper earth wire, PVC insulated of 1.5 sqmm size all as directed

All as per item No 118 above but for with 4.0 sqmm two run and one switch socket combination 15 Amps independent with one run cable 4.0 sq mm size asearth wire complete

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.

S & F switch Bell push 5/6 Amps, flush type complete all as specified.

S&F socket outlet 2in1, 5 pin 5 Amps flush type 240 Volts ISI Marked with complete all as specified.

S&F the switch piano flush button type single pole one way 15/16 Amps 240 volts ISImarked complete all as specified and directed.

S&F the socket outlet 2in1, 5 & 15 Amps flush type universal shuttered 240 Volts ISI Marked with complete all as specified.

S&F the Ceiling rose, three terrminal ISI Marked surface backlite complete.

S&F the electronic double space rotary step type 5 speed regulator 120-280V.

S&F electric bell AC, Ding -dong type, 230 volts, single pole complete all as specified.

S&F the tube light fitting suitable for 18 watt LED tube light single including 18 Watts LED Tube light 18 Watt lamp with high frequency power factor 0.90 wall/ceiling mounted with all accessories internally prewired and including connecting up with twin core copper conductore cvable of size 23/.0076 from ceiling rose to connetor block all as specified. Make: Philips/ CG/ Havells

S&F the 10 watt LED Tube light single with high frequency power factor 0.90 wall/ceiling mounted with all accessories internally prewired and including connecting up with twin core copper conductore cvable of size 23/.0076 from ceiling rose to connetor block all as specified. Make: Philips/ CG/ Havells

S&F testing and commissioning of MCB SP 6 to 30 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as directed Make : Legrand (DX3)/Schnedir(Acti-9)/Indo Asian(Optipro)

S&F testing and commissioning the MCB SP ,240 Volt AC50 Hz,32 Amps complete all as directed Make : Legrand (DX3)/Schnedir(Acti-9)/Indo Asian(Optipro)

Taking down DBs along with all accessorieis any type any size and making good the distrubed surface complete all as specified and directed.

S&F in repair the sheet metal enclosure MCB DB, SPN 240 Volts, 8 Way double door type grouting in wall in CM,Making good of disturbed surfaces and matching with existing and electrical connections complete all as directed Make : Legrand (DX3)/Schnedir(Acti-9)/Indo Asian(Optipro)

M&L for renewal of Earthing complete with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to GI earth wire of size 4mm dia as earth lead by means of bolts, nuts, checknuts and washers of GI or steel all as shown in electrical plate no 3 of SSR Part-1 connected to earthing lead upto main switch board/main board all as specified and testing on completion including provision of earth wire protected by GI 15 mm dia light grade pipe and watering pipe shall be 20mm bore light grade including all excavation and easrth work in any type of strata, PCC pit pre-cast RCC Cover, Charcoal/salt, funnel with wire mesh etc complete all as speified and directed. Note : (i) The ratequoted shall also deemed to include the cost of GI earth strip and protection pipe upto 7.5 Mtr beyondtheearth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

Taking down sub main wiring alongwith existing conduit and accessories complete all as specified and directed by Engr-in-Charge.

M&L Sub main wiring with 2 single core flame retardant PVC Insulated and unsheathed cable with standed copper conductor of 6 sqmm drawing in & including medium grade PVC concealed conduit pipe 20mm bore ISI marked wih all accessories on wall and making good of disturbedsurface including all conduit fittings, clamps, gutties etc and one additional earth wire of 4.0 sq mm but green in colour for earth DBs and boxes with proper thimbles complete all as specified and directed. Note: two run of 6 sq mm wire and one run of 4sqmm earth wire shall be measured as one unit.

S&F Light fitting LED bulk head fitting 10Watt complete all as specified and as directed. Make Philips

S&F in repair the sheet metal enclosure Vertical distribution board TPN when MCCB to be used TPN (Triple pole and neutral) 4 way, 415 Volts IP 42/43 protection with 200 Amps rated bus bar, double door type groting in wall including MCCB,415 Voltss 4 pole, TPN rating 100 Amps, 16 KAbreaking capacity as incomer thermal magnatic type complete all asspecified and directed. Make : Legrand (DX3)/Schnedir(Act

S&F in repair MCCB, 415 volts, 4pole TPN rating 63 Amps, 16 Kabreaking capacity as incomer thermal magnatic type complete all asspecified

Taking down of existing ceiling fan from any height opening and dismantling for greasing,oiling ,change of bearing/bush, rewinding if required etc and painting blades, rod and fans and make serviceable with required items at site complete if unserviceable in situ, paint with synthetic enamal paint by spraying including filling cavities with filler one coat after cleaning all dust writing MES No with black paint etc and hanging of fans at same location including clamp with nut/bolt and rubber bush of any make connecting up including provision of cable from ceiling rose to fan comlete all as specified and directed.

S&F the Exhaust fan 300mm sweep 230 volts, Heavy Duty metal body 50Hz with louver complete accessories and including cutting hole for fixing suitable size and connecting up provision of cable from ceiling rose to fan complete all as specified.

ROHAN BUILDERS

Shiva Shakthi Electrical Enterprises

Phoenix Infra

SHREE JAGANNATH CONSTRUCTION

S CHANDRASHEKAR (SREE BUILDERS)

Maruthi constructions

VARGHESECHACKO AND CO

ARATHEERTHA CONCEPTS

chowdeshwariconstructionco