GE/U(N)-13/2024-25 PERIODICAL SERVICES INCLUDING CERTAIN MISC REPAIRS AT SUB AREA AND ADJOINING AREA UNDER AGE B/R-I OF GE (NORTH) UDHAMPUR

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and recast concrete articles all as specified.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as specified and as directed.

All as per item No. above herein before, but except bricks. Note-Old bricks obtained against dismantling shall be used.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement and with using Water proofing compound .(Water proofing compound shall be measured and paid separately ) complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound

M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered of wall complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair face on brick/concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L two coats of oil bound distemper over a coat of primer over two coats of approved wall care putty over and including preparation of new plastered surfaces of wall complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in cement mortar 1:4 on fair face on brick/concrete surfaces on ceiling and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Preparation of new plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated plastered surfaces and applying one coats of white wash on ceiling, complete all as specified and directed by Engineer-in-Charge.

Preparation of old plastered or un-plastered surface by brooming down or steel wire brushing, scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying one coat of distemper oil emulsion white or tinted on walls/ceiling, complete all as specified and directed by Engineer-in-Charge.

Preparation of old plastered or un-plastered surface by brooming down or steel wire brushing, scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying two coat of distemper oil emulsion on walls/ceiling, white or tinted, over a coat of alkali resistant priming paint, complete all as specified and directed by Engineer-in-Charge.

Preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of cement base paint on walls, complete all as specified and directed by Engineer-in-Charge.

Rubbing, stopping of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed by Engineer-in-Charge.

Preparation of old wooden painted surface not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Preparation of old painted steel and iron surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

Preparation of new/old plastered surfaces and applying two coats of Weatherproof exterior emulsion (water based) paint white or tinted over primer including preparation of walls surfaces, complete all as specified and directed by Engineer-in-Charge. Note : Wall care putty be applied in two coat and each coat shall be rubbed and smooth by suitable emery/sand paper.

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each with shutters (Without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkats or frames not exc 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and as directed.

Providing and fixing power coated aluminium (minimum thickness of power coating 50 micron) for shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprane gasket required (fitting shall be paid for separately) with extruded built up standard tubular section /appropriate Z section and other section of approved make conforming to IS:733 and IS:1285 fixing with dash fastener of required dia and size, including necessary filling up the gaps at junctions i.e. top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminiums section shall be smooth, rust free, straight mitred and jointed mechanical wherever required including cleat angle, aluminium snack beeding for glazing/ paneling, CP brass / stainless steel screws all as complete as per architectural drawing and the direction of Engineer-in-charge.

S&F Glazing with 5mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with a minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F Stainless steel mosquito proof wire cloth of stainless 0.36mm dia and 1.4mm aperture fixed with aluminium flat/channel and screws all as specified as directed by Engr-in-Charge.

Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for Granite stone slab window cills incl bull nosing rounding edges directed colour, 18 mm thick machine cut, as in cills /skirting/ dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, over 10mm thick rendering in CM 1:3 complete all as specified and as directed.

Disconnection of existing tanks, setting side for repairing, cleaning etc and hoisting after cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the ward ' CLEANED ON WITH DATE' with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea, socket, nipple of any size etc, complete all as specified and directed by the Engineer-in-Charge.

Description all as per Srl item No.23 here in before but of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word' ' CLEANED ON WITH DATE' with white paint including replacement of broken/ unserviceable fitting such as Elbow, Tea, socket, nipple of any size etc, complete all as specified and directed by the Engineer-in-Charge.

Description all as per Srl item No.23 here in before but of capacity exc 1000 ltrs and upto & including 2000 ltrs and endorsed the word' ' CLEANED ON WITH DATE' with white paint including replacement of broken/ unserviceable fitting such as Elbow, Tea, socket, nipple of any size etc, complete all as specified and directed by the Engineer-in-Charge.

Dismantling water tanks of exceeding 250 & not exceeding 500 ltrs and removing to store, complete all as specified and as directed.

Dismantling water tanks of exceeding 500 & not exceeding 1000 ltrs and removing to store, complete all as specified and as directed.

Dismantling water tanks of exceeding 1000 & not exceeding 2000 ltrs and removing to store, complete all as specified and as directed.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Triple layer) white in colour including water tank cover (internally /interlocking arrangement for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair) complete all as specified and as directed.

M&L for 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layer white in colour (inside outside) hoisted and fixed in position incl inlet, outlet and overflow connection nipple of suitable size complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 2000 litres capacity (Triple layer) white in colour including water tank cover (internally /interlocking arrangement for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.

Taking up/down steel tubing and connections including cleaning for re-fixing or removal to store 15mm bore pipes complete all as specified and as directed.

Taking up/down steel tubing and connections including cleaning for re-fixing or removal to store 25 mm bore pipes complete all as specified and as directed.

Taking up/down steel tubing and connections including cleaning for re-fixing or removal to store 40 mm bore pipes complete all as specified and as directed.

S&F 15 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

,-ditto- as above item but except pipe complete all as specified and as directed.

S&F 25 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

,-ditto- as above item but except pipe complete all as specified and as directed.

S&F 40 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

,-ditto- as above item but except pipe complete all as specified and as directed.

S&F 25mm Gun metal, global or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and as directed.

S&F 20mm Gun metal, global or gate valves, with iron wheel head, screwed both ends for iron pipe fixed in repair complete all as specified and as directed.

S&F ball brass valve 25 mm dia high pressure with polythene float and fly nut fixed in repair complete all as specified and directed.

S&F in repairs Ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed.

Dismantling of wall and ceiling boards (Fibre, Pulp, Insulation, Etc.) or insulation boards/ slabs /blankets any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.

S&F 5mm thick (HL Series) insulated PVC Wall Lining honeycombed consisting of PVC Insulated Panels (As per approved by GE) with approved design & pattern duly fitted into the wall including PVC angle Jointers, U jointers, beading etc as required at the edges including removing and re-fixing electric boards & plates and covered with PVC strips or beading after fixing wall paneling including dismantling of old PVC wall paneling, complete all as specified and directed by Engineer-in-Charge

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fitting and accessories).

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps, all as specified and directed by the Engr-in-charge.

All as per Srl item No.39 above but as in re-fixing only with stack clamp to wall complete all as specified and as directed.

S&F110 mm bore PVC (SWR) bends with access door any radius, all as specified and directed by the Engr-in-charge.

S&F 12mm thickness Toughened glass as in hinged doors, partition automatic doors, partitions etc. and similar work including cutting to shape, drilling holes required complete all as specified and directed by Engineer-in-Charge.

M&L Writing a letter or figures (Block, roman, Italic or Indian) n.exc. 30 cm high complete all as specified and directed by Engineer-in-Charge.

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall/ valley gutter/ Barge board, fixed with self tapping screws complete all as specified and directed by the Engineer-in-Charge.

M/S GURU DEV BUILDERS

KALSOTRA CONSTRUCTION CO

Bansal and Sons