SPL REPAIR TO BLDG NO P 40 MES IB INCL REPLACEMENT OF ELECTRIC WIRING AND SWITCH BOARDS IN ENTIRE BLDG AND TILING FALSE CEILING AND RENOVATION OF TOILET IN SUITE NO 1 3 AND 4 INCLUDING CERTAIN SANCTIONED WORKS AT GMS UNDER GE I GOS

Amount

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, not exceeding 0.36 sqm, set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in skirtings/ vertical surfaces, not exceeding 0.36 sqm, set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

Dismantling of floor, hearth, walls, roof tiles including bedding (but not backing), and rubbish off permises complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specified and directed.

M&L preparation of old wooden surfaces of any description not other wise described over 10cm width or girth and applying two coats of wood varnishing over one coat of transparent wood filler liquid complete all as specified and directed.

Dismantling wrought iron or mild steel work/ old railing of any description complete all as specified and directed.

M&L Cutting holes in existing Concrete / Brick Work, supply and fixing stainless steel of grade 304 as Railings of approved pattern using square/ rectangular/ circular hollow sections, fixing with adequate support from bottom and side walls, making good the holes with PCC 1:2:4 including necessary fabrication, finishing the joints etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs /blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 12 mm thick plain Gypsum Board False Ceiling with GI frame including all necessary drilling cutting to fix electric items complete all as specified and directed with following:- (a) GI Grid channel 30x25x20 mm of 24 gauge fixed with rawl plug and screw 450 mm centre to centre alongwith perimeter walls. (b) GI channel made to shape 50x40x40 mm of 24 gauge placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10 mm of 24 gauge fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide and 20 mm gauge suspended fixed with steel fastner to roof ceiling and 1200 mm centre to centre including pluging of RCC Slab. (e) 12 mm thick gypsum board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

Dismantling of Wooden Wall Panelling with base plywood work incl all hardware items and removing to store complete all as specified and directed.

M&L Plywood, grade BWR, type BB, 12 mm thickness in first layer for making the base for second layer for panelling fixed with nails to timber framework complete all as specified and directed.

M&L Plywood, grade BWR, type BB, 12 mm thickness in second layer for making the base for Wooden panelling fixed with screws complete all as specified and directed.

M&L Wooden Wall Panelling with 12 mm thick teak wood board planks of width 300 mm finishing plain and even complete all as specified and directed.

M&L preparation of newly untreated wooden surfaces of any description not other wise described over 10cm width or girth and applying two coats of wood varnishing over one coat of transparent wood filler liquid complete all as specified and directed.

M&L Wooden lining top border of size 35 mm x 50 mm all along the Wall Panelling complete all as specified and directed.

M&L Decorative laminate type 1 of surface finish 1.5 mm thick, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Dismantling of Wooden Wall Panelling with base plywood work incl all hardware items and refixing at the same place after tiling work has been done, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered walls surfaces making absolutely even and smooth, rubbing with sand paper complete all as specified and directed

M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered Ceilings surfaces making absolutely even and smooth, rubbing with sand paper complete all as specified and directed

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each and removing to store complete all as specified and directed.

S&F Flush shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face is covered with decorative face veneer with lipping/frame to match the existing shade complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm)

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drawing SSR Part-II 2020 complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II 2020 complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 100 mm dia extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 25 mm bore of pipe complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 25 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

Making connection of PPR distrubtion branch with PPR main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

S&F in repair PP-R globe or gate valves screwed both ends for PPR Pipes of 20 mm bore of pipe complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Bricks/ stone Masonary wall complete all as specified and directed.

S & F in repair Europian WC floor mounted cascade pattern vitreous china with dual core flushing cistern incl all fitting flush pipe etc complete all as specified and directed. Make-Jaquar cat SLS-WHT-0208 or equivalent of higher cost.

S & F in repair Soap dish any type fixed to plug with chromium plated brass screw complete all as specified and directed. Make-Jaquar CAN-1311 N or equivalent of higher cost.

S & F in repair Double coat hook complete all as specified and directed. Make-Jaquar AQN-7761 or equivalent of higher cost.

S & F in repairs Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook complete all as specified and directed. Make Jaquar Cat ALD-CHR-565 or equivalent of higher cost.

S&F in repair Chromium plated angular stop cock for 15 mm bore complete all as specified and directed. Make-Jaquar CON-053KN or equivalent of higher cost.

S&F in repair Chromium plated Two-way angular stop cock for 15 mm bore complete all as specified and directed. Make-Jaquar CON-059KN or equivalent of higher cost.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S & F in repair Brass chromium plated Central hole Basin mixer without pop-up waste system with 450 mm long braided hoses complete all as specified and directed. Make-Jaquar QQT-7167B or equivalent of higher cost.

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating,jointing with solvent cement as per site requrement complete all as specified & directed.

S&F in repairs WHB counter-type of size 195X600X425 mm including Couplings, complete all as specified and directed. Make-Jaquar CNS-WHT-WB03 or equivalent of higher cost.

S&F in repair Chromoium plated Bib cock with flanges Quarter turn 15 mm bore complete all as specified and directed. Make-Jaquar FUS-29037 or equivalent of higher cost.

S & F in repair Bottle trap chromium plated for WHB as per approved quality complete all as specified & directed.

S & F in repair Toilet Paper Holder with Flap complete all as specified and directed. Make-Jaquar AKP-3573P or equivalent of higher cost.

S&F in repair single door PVC cabinet mirror of size 300 mm x 450 mm with internal shelves complete all as specified & directed.

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed..

S&F Chromium plated towel ring with bracket complete all as specified and directed. Make Jaquar Cat AQN -7721 or equivalent of higher cost.

S&F LDPE pipe 50mm of pressure rating 6Kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

M&L for planting of "ARECA PALM" plant of height not less than 60 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for planting of "UMBRELLA PALM" plant of height not less than 30 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for planting of "PHONIX PALM" plant of height not less than 60 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for planting of "FOXTEL PALM" plant of height not less than 100 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for planting of "THUJA" plant of height not less than 100 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for planting of "RED AGLONEMA" plant of height not less than 60 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for planting of "TROTHIC FYCUS" plant of height not less than 100 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for planting of "AGLONIMA" plant of height not less than 60 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for planting of "DURENTA YELLOW HAZE" plant of height not less than 15 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for planting of "MAXICIAN GRASS" plant incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified & directed.

M&L for 20 mm size Brass sprinklers fixed on 20 mm GI tube of height 750 mm and supported by M.S tripod mode of angle iron of size 40 X 40 X 5 MM and painted with black enaml paint other and of GI tube have an arrangement to fix PVC/rubber hose pipe incl 20 mm size (I/D) fiber reinforced rubbes hose pipe of 30 m length heavy duty type. complete all as specified & directed.

M&L for 25 mm size Brass sprinklers fixed on 25 mm GI tube of height 750 mm and supported by M.S tripod mode of angle iron of size 40 X 40 X 5 MM and painted with black enaml paint other and of GI tube have an arrangement to fix PVC/rubber hose pipe incl 20 mm size (I/D) fiber reinforced rubbes hose pipe of 30 m length heavy duty type. complete all as specified & directed.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth and getting out soft/loose soil, complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified & directed.

Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point, complete all as specified & directed.

Supply and fix in repairs double wall corrugaed HDPE pipe 50 mm outer dia for protetion for UG cable complete all as specified and directed

Supply and fix in repairs double wall corrugaed HDPE pipe 80 mm outer dia for protetion for UG cable complete all as specified and directed

M&L for laying of steel water tube medium grade under road/ path of bore 80 mm complete all as specified & directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 Core complete all as specified & directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 Core complete all as specified & directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 Core complete all as specified & directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 Core complete all as specified & directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 Core complete all as specified & directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 Core complete all as specified & directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 Sqmm 3.5 Core complete all as specified & directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 Sqmm 3.5 Core complete all as specified & directed.

M&L earthing complete with galvanised steel earth plate electrode 600x600x6mm burried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5mtr below normal ground level connected to the Galvanised iron strip 32x6mm size by means of bolts ,nuts,check nuts and washers of galvanised iron and 32x6mm GI strip procted by provision of GI light grade pipe 40 mm bore incl provision of concrete pit in PCC1:2:4 type B-1, using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg /Sqm and 6mm dia bar handle ,excavation and earth work in any type of soil ,charcoal dust and salt light grade GI watering pipe 20 mm bore with funnel and wire mesh and medium grade GI protection pipe 15mm bore 5 Mtr long and GI strip upto main earthing of pole complete all as shown in electrical plate No 3 of MES Sch 2009 Part-I complete all as specified & directed. Notes:- (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 metres length shall deem to be included in the unit rate quoted against this item. (ii) GI protection pipe & earthing lead beyond 7.5 metres shall be measured and paid for seperately under appropriate item of Sch A part-I. (iii) On testing after completion if desired resistanace is not obtained, the contrator shall redo the earthing without any extra cost to the department.

Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 6 to 16 Sqmm 4 core complete all as specified & directed. Make - 3M or equivalent of higher cost.

Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 25 to 50 Sqmm 4 core complete all as specified & directed. Make - 3M or equivalent of higher cost.

Supply and fixing cable jointing kit for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 70 to 120 Sqmm 4 core complete all as specified & directed. Make - 3M or equivalent of higher cost.

Supply, fabricate, erect, test and commission in replacement outdoor LT SMC Feeder pillar box totally enclosed weather and vermin proof, suitable verntilated, 440 Volts, 50 HZ, AC Supply, factory made standard design as per electrical requirements to suit power distr sys , enclosure fabricated out of 3.15 mm thick MS sheet, excavation and earth work, PCC foundation etc,with hinged doors and lcoking arrangemetn , air vents, tappered roof, incoming and outgoing cable connections from bottom with compressed cable gland etc as required with and including the following, supplied fitted and connected internally complete 04 Nos aluminium bus bar of unequal size of aluminium conductor with PVC coloured heat srinkable type sleeves continous phase rating 400 Amps and neutral rating 200 Amps mounted on non cracting resin type insulators complete all as specified & directed.

Boring of holes horizontally for laying of 80mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed.

M&L for painting steel tubular pole/steel rail pole/swan neck pole 9/11 mtrs long alongwith bends with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded potion with two coats of black bituminous paint over a coat of red oxide primer with and including marking of pole number with black paint in yellow circle, complete all as specified and directed

M&L for painting PCC/RCC pole 9/11 mtrs long alongwith bends with two coats of weather proof paint (white colour) in poles and two coats of aluminium paint over a coat of red oxide primer on bends plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer with and including marking of pole number with balck paint in yellow circle, complete all as specified and directed.

S&F in repairs of flat/ round 3 core copper conductor PVC insulated & PVC insulated & PVC sheathed cable 1.0 sqmm , 1100 V grade complete all as specified and directed ( Havells/RR KABEL/HPL/Anchor)

S&F in replacement of old unsv cable loop box with PVC box of size 280x170x130 mm incl 6 amps MCB fixed on pole incl necessary clamps, bolts, nuts complete all as specified and directed ( Syntex/Hensel)

S&F in repairs rigid non metallic PVC conduit of size 20 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as coupler, lock nuts, saddles pipe hooks etc. complete all as specified and directed

S&F in replacement of timr panel, made of MS enclosure factory made consisting digital timer 24 hours set up with contactor rating 63 amps TP of max load 12 KW complete with fixing arrangements on MS channel of suitable size and necessary PCC wk complete all as specified & directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN Dbs/TPN DBs/ Main switch including old unserviceable MCCBs/ MCBs isolators etc and making good to disturbed surface complete all as specified and directed

Taking down care fully copper/ aluminium sub main wiring of any size from surface / concealed / existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed

M&L for point wiring with 1.5 Sqmm signle core PVC insulated sheathed copper FRLS multi stranded copper conductor cable in and including concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including GI sunk boxes of size 1.2 mm thick and 60mm deep with earth dolly duly, covered with modular cover plate with inner frame suitable for modular switch/ socket of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for following:- (a) One light point controlled by one , one way switch 5 Amp

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps Switch socket outlet point controlled by one switch on the same board

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

(e) one light/fan point controlled by two two way 6 amp switches

All as per tiem No 120 above but using 2.5 Sqmm single core copper conductor cable of multistranded flame retardent PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combition point including necessary running of 2.5 Sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

All as per tiem No 125 above but using 4.0 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combition point including necessary running of 2.5 Sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. Make: Havells Cat part No LUMILINEBS20WLED830SPCWH or equivalent of higher cost.

M&L for Modular switch 1 way 6A, 1 module complete all as specified and directed

M&L for Modular switch 2 way 6A, 1 module complete all as specified and directed

M&L Modular Socket outlet 2 in 1, 6 pin 6 Amp 2 module ISI marked, complete all as specified and directed.

M&L for modular Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch complete all as specified & directed.

M&L for modular Fan step regulator, 120W - 2 module, 230 volts complete all as specified & directed.

M&L for modular Switch socket outlet 3 pin 5 amp' flush type 220 volts complete all as specified & directed.

M&L for Sheet metal enclosure factory made double door for mounting MCBs with 200A rated bus bar Scapacity SPN 8 way AC 240 Volts with IP-43 protection, complete all as specified and directed.

M&L for Ceiling rose 3 terminals of PVC/ polycarbonate, as per relevant IS code, ISI marked isolated body complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less'than 1.5 meters below normal ground level, connected to galvanised iron earth lead wire of 4 mm dia GI pipe mediam grade 15 mm dia upto 7.5 mtr including provn of conrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25x25x3 mm with lugs 02 Nos and with 6.0 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for earth plate, common sald and charcoal filing, test point made out of Bronze/ Gun metal with fixing arrangement, funnel, wire mess and excavation/ earthwork in hard/ dense soil, to a distance not exceeding 50 mtr all as per electrical plate No 3 of SSR 2009 Part I and connecting to earth test point complete all as specified or indicated incl testing on completion.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers heavy duty complete all as specified & directed.

M&L submain wiring with two single core 10 Sqmm size stranded copper conductor PVC insulated unsheathedcable FRLS in and incl PVC rigid non metalic conduit concealed/ surface type and one PVC cable of 6.0 Sqmm size solid copper conductor PVC insulated andunsheathed for continous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified & directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of capacity 40 to 63 Amp SPN 240 Volts and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified & directed.

M&L for laying of concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows for one telephone socket point alongwith for RJ-11 telephone socket with transparent shutter 1 module alongwith fulsh metal box 1 module and front cover plate 1 module complete all as specified & directed. Make: Legrand cat No 573627 for RJ-11, Cat No 575700 for modular box and cat no 6890 07 for modular cover plate or equivalent of higher cost.

M&L for laying of concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows for one TV socket point alongwith TV socket 1 module alongwith fulsh metal box 1 module and front cover plate 1 module complete all as specified & directed. Make: Legrand cat No 5727 73 for outlet, cat no 575700 for modular box and cat no 6890 07 for modular cover plate or equivalent of higher cost.

S&F in replacement of decorative mirror light fitting of capacity 12 W 220 volts , 50 Hz complete all as specified and directed. Make: Philips Cat Part No 919216000000 or equivalent of higher cost.

S&F in replacement of ceiling recess light fitting of capacity 5 watt round in shape suitable for installation in concealed box with polycarbonate body (warm white colour) 220 volts , 50 Hz complete all as specified and directed. Make: Havells cat part No ORBITDLR5WLED857S or equivalent of higher cost.

S&F in repairs of modular AC box with 25 Amp mcb SP 240 Volts , 50 Hz complete all as specified & directed. Make Havells DBOXx or equivalent of higher cost.

S&F in repairs for modular metal flush box 6 module complete all as specified & directed.

S&F in repairs for modular metal flush box 8 module box (H) with 6 clamps complete all as specified & directed.

S&F in repairs for modular metal flush box 12 module box complete all as specified & directed.

S&F in repairs for modular metal flush box 4 module complete all as specified & directed.

SF in repairs combined modular plates 4 module complete all as specified & directed. Make: Havells coral glossy white or equivalent of higher cost.

SF in repairs combined modular plates 6 module complete all as specified & directed. Make: Havells coral glossy white or equivalent of higher cost.

SF in repairs combined modular plates 8 module complete all as specified & directed. Make: Havells coral glossy white or equivalent of higher cost.

SF in repairs combined modular plates 12 module complete all as specified & directed. Make: Havells coral glossy white or equivalent of higher cost.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complet all as specified and directed. Make : Havells/Anchor/Orient/Crompton Greaves

S&F in repairs LED recess fitting 36 watts, 2x2ft , 220volts, 50 Hz complete all as specified and directed. Make: Havells Cat part No PLANO2x2PLR36WLED865S or equivalent of higher cost.

S&F in repairs LED surface and wall mounting LED batten with polycarbonate housing and integrated electronic driver with capacity 10Watts, 220 volts, 50 Hz complete all as specified and directed. Make Havells Cat Part No LUMILINEBS10WLED865SPCWH or equivalent of higher cost.

Supply dry sand for cushioning to underground cables 8cm thick before laying cable and 15cm thick after lying and streching the cable, complete all as specified and directed. Note :- For payment purpose punned thickness shall be measured.

S&F sub class ‘B brick, old size, as cable protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed.

Likitha Enterprises

M/s Bapujee Builders and Traders

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

M/S JAGANNATH SASMAL

M/S SIWALIK AND CO

DHABALESWAR ENGINEERING WORKS