Maintenance work (Surface dressing, Jungle Cleaning, Drain Cleaning, Painting and others Maisecllanious work) of 60 mtr Wide Road S.K. Road T- Junction to Delta Rotary, for three years Greater Noida.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. (all kind of soil.)

Cleaning jungle including uprooting of rank vegetation grass bush wood trees and saplings of gith upto 30 cm measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 m out side the periphery of area cleared.

Tractor with trolley including Pol & driver SOR2020/SIN19 Chapter 2

Supply of labour. SOR2020/SIN12

Excavation in foundation in ordinary soll. (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). Sor-20/251(a)

Extra rates For quantities of work excavated: in or under water and for liquid mud including pumping out water as required. DSR-18/2.24.1

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20 cm, layers including remming and dressing the surface to required levels and slopes and also induding 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M distance as directed by the Engineer incharge: excluding Royallity. Wherever applicable for small work or Abadi area. Cartage of earth or fly ash when added to schedule item no. 253. (c) lind Km and beyond

Supply and fixing SFRC Cover chamber (with out frame) 50mm thick. 600 X 600 mm medium duty

M-150 Brick Work in 1:4 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work

Same as item no. 305 but in 1:4 one cement & four Coarse sand of 2.20 FM. mortar.

12 mm Thick cement plaster 1:6 (1 cement: 6 course sand dsr/2018-13.4.2

Excavating holes more than 0.10 cum and upto 0.5 cum including getting out the excavated soil then returning the soil as required in layer and not exceeding 20cm in depth including consolidating each deposited layer by ramming watering etc. with disposing of surplus excavated soil as direction with in a lead of 50m and lift upto to 1.5m all kind of soil. DSR/2018/2.30.1

Supply at site: RCC Standards post/struts/rails/pales of mix 1:1.5:3 (1 cement:: 1.5 coarse sand: 3 graded stone aggregate 12.5 mm nominal size) with wooden pligs or 6 mm bar nibs wherever required as per direction of engineer-in-charge. (cost of earth work in excavation,concrete works in foundation to be paid separately). DSR-13/16.15.1 AR/GNIDA

Providing and laying in postion cement concrete 1:4:8 (1) cemnet: 4 coarse sand: 8 graded stone aggregate 40mm nominal size)

Panting with synthetic enamal paint of approved brand and manufacture to give an even shade two for more coat

Tractor with Water Tanker with cost of water including POL

for Sprinkling

J.C.B with driver including pol (SOR-31)

Providing and laying at or near ground level old kerb stones all type in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints excepts at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as peer direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (old kerb stone shall be approved by Engineer-in-charge).

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints excepts at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as peer direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C kerb stone shall be approved by Engineer-in-charge). DSR-13/16.69

White washing with lime to give an even shafe: Old work (one or more coats) DSR-13/14.42.2

Painting with aluminium paint of approved brand and manufacture to give an even shade. One or more coat on old work DSR-13/14.55.1

Providing and laying in postion cemnet concrete of specifed grade excluding the cost of centering and shuttering- All work up to plinth level

1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregater 20mm norminal size) SOR

Steel Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Thermo-mechanically treated bar 5.22.6

P/L position cement concrete-all works uptp plinth level 1:4:8 (1cement:4coarse sand:8 graded stone Lagerceate 40mm.nominal size)

Providing and laying 80mm thick factory made cement concrete interlocking paver vlock of M-30 grade made by block making with strong vibratory compaction, of approved size, design & shape, laid in required color and pattern over and inclkuding 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc.all complete as per the direction of engineer-in-charge.

Providing and laying in postion cemnet concrete of specifed grade excluding the cost of centering and shuttering- All work up to plinth level

1:2:4 (1 cement: 1.5 coarse sand: 3 graded stone aggregater 20mm norminal size) SOR

Fencing with R.C.C. post placed at required distanse, embedded in cement concrete blocks. every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire 9.38 Kg./100metres (min) between the two posts fitted and fixed with G.L. staples on wooden plugs or G.I. binding wire tied to 6mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for seperately): Payment to be made per metre cost of total length of barbed wire used. With Gl barbed wire (DSR-13/16.17.1/p-264)

Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement: 5 coarse DSR18/16.67

Labour Cess and GST will be paid extra as per govt. orders