Pumpset at 2.00 Lakh Litres OHT Kanakalapeta Water Works, yanam

Amount

15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

2.6.1A Earthwork in excavation over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m - disposed earth to be levelled and neatly dresses - all kinds of soil.

2.27 Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete.

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).

6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand).

6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand).

13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

18.26.1 Providing and laying flanged C.I.standard specials such as tees, bends, collars,tapers, caps etc., suitable for flanged jointing as per IS:1538 - upto 300 mm dia.

18.31.4.1 Providing and fixing C.I.sluice valves (with cap) complete with bolts,nuts,rubber insertions etc. (the tail pieces if required will be paid separately) -200 mm diameter -class I.

31.9.1 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end) - 15mm nominal bore.

31.48.8D Providing and fixing C.I. Ball type non return valve (PN 1) conforming to IS 318 & IS 1363, with bolts, nuts, rubber insertion etc., complete (the tail pieces if required.

31.128.1D Providing and laying Cast Iron Double flanged pipe conforming to IS specification 1537&7181 and ISI marked suitable for flanged joints in good condition including transportation of C.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc., complete all as per IS 3114 and CPWD specification. (earth work and jointing of pipes with rubber insertion will be paid separately) -200mm dia.

31.136.1C Providing, laying and jointing G.I pipes of medium class (blue) (TATA, TNT, Nezone, Apollo, Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including GI specials such as bends, tees, elbow, coupling, reducer etc.,complete all as per IS and CPWD specification. -25mm dia

31.139.1A Providing and fixing in position G.I. union (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete- 15 mm dia.

31.139.1C Providing and fixing in position G.I. union (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete- 25 mm dia.

31.141.1 Providing and fixing in position G.I. elbow (UNIQUE/R Brand/HB Brand/ UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 15 mm dia.

31.141.1B Providing and fixing in position G.I. elbow (UNIQUE/R Brand/ HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 25 mm dia.

31.153.1G Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc,complete-150mm dia.

31.160.1M Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer,endcaps etc.,complete all as per IS and CPWD specification. - 200mm dia.

31.172.1H Providing and fixing in position UPVC moulded tail piece without flange(Finolex / jain) (0.6 Mpa)conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 200mm dia.

31.179.1H Providing and fixing in position UPVC fabricated bend (Finolex / jain)(1 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 200 mm dia

31.256.1C Supplying and fixing of fully automatic air break star-delta starter range for 13A to 25A F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with suitable M.S. angle frame etc., complete.- 20HP to 25HP pumpsets - (ML-1.5)

31.257.1 Supplying and fixing of DOL starters 0.5 HP to 5 HP with relay range 0.63 A to 13 A with suitable M.S. angle frame complete.

31.276.1C Supplying of electricallly operated horizontal split casing pump and motor (JYOTHI/KIRLOSKAR/ BEACON) make AC 3 phase, 415 volts,50 HZ,1500 RPM, squirrel cage motor.The pump shall have bronze impeller,high grade steel shaft, flexible coupling set, including the cost of common,M.S. Base plate, foundation bolts,etc. complete with suitable suction and delivery sizes. (25 HP centrifugal motor and pumpset).

31.277.1B Supplying and fixing of 25 X 25 mm size vaccum pump (KIRLOSKAR /MAXWELL/ DEKKAR) make 3 phase monoblock motor and pumpset complete. -2.2 KW/3 HP

Basic Code No.1101A Supply and fixing of 1.5 sq. mm ISI marked, FR PVC insulated, single core copper conductor cable.Make: Havells/L&T etc., complete as directed by the Engineer-in-charge.

Basic Code No.1105A Supply and fixing of 10.0 Sq.mm ISI marked, FR PVC insulated, single core copper conductor cable. Make: Havells/ L&T as directed by the Engineer-in-charge.

Basic Code No.1710A Supply and fixing of 40 amps. To 63 amps.ratings, TPN MCB, "C" series, 10 B58 KA breaking capacity. Make: Siemens/ABB:- as directed by the Engineer-in-charge.

Basic Code No.3026 Supply and fixing of Batten/Angle holder (jumbo type). Make: Kundan/ Anchor/ Vinay as directed by the Engineer-in-charge.

Basic Code No.3148 Supply and fixing of 63A cutout fuse unit. Make: Kundan as directed by the Engineer-in-charge.

Basic Code No.3077 Supply and fixing of 15W incandescent bulb. Make: Philips/ Bajaj as directed by the Engineer-in-charge.

Basic Code No.1431 Supply and fixing of S.P. 5/6 amps, one way switch, piano/ flush type ISI marked. Make: Kundan / Anchor/Vinay as directed by the Engineer-in-charge.

Basic Code No.3329 Supplying and drawing of Analog Ammeter direct/ CT Range 0-30A. Make: Siemens /L&T-Hager / Legrand-Lexic etc. complete as directed by the Engineer-in-charge.

Basic Code No.3331 Supplying and drawing of Analog voltmeter Range 0 - 500 V. Make: Siemens/L&T- Hager/ Legrand-Lexic etc. complete as directed by the Engineer-in-charge.

Basic Code No.3360 Supply and fixing of Hylem sheet- 10mm thickness as directed by the Engieer-in-charge.

Basic Code No.3334 Supply and fixing of 100/5A current transformer (0.5% precision. Make: L&THager/ Legrand-Lexic as directed by the Engineer-in-charge.

Basic Code No.2206 Supply and fixing of Aluminium lugs for 50 sq.mm cable as directed by the Engineer-in-charge.

Basic Code No.3338 Supply and fixing of Toggle Switch. Make: C&S etc. complete as directed by the Engineer-in-charge.

Basic Code No.3274 Supply and fixing of 4.0 Sqmm, submersible motor 3 core copper flat cable. Make: Kundan/Polycab etc. complete as directed by the Engineer-in-charge.

Basic Code No.3276 Supply and fixing of 10.0 sqmm, submersible motor 3 core copper flat cable. Make: Kundan/Polycab etc. complete as directed by the Engineer-in-charge.

Basic Code No.3366 Supply and fixing of Aerial board etc. complete as directed by the Engineer-in-charge.

Basic Code No.3183A Supply and fixing of 125A TPN cubical switch with ss enclosure excluding fuse link DIN type. Make:L&T etc. complete as directed by the Engineer-in-charge.

Basic Code No.3175 Supply and fixing of 125/200/250/315A DIN HRC fuse base. Make: Standard / Havells/ C&S etc. complete as directed by the Engineer-in-charge.

Basic Code No.3161A Supply and fixing of 250A HRC fuse link (DIN type) . Make:L&T etc. complete as directed by the Engineer-in-charge.

Basic Code No.3051 Supply and fixing of 1 x 40W box type single tube light fitting with copper choke & starter without tube. Make: Philips/ Bajaj etc. complete as directed by the Engineer-in-charge.

Basic Code No.3112 Supply and fixing of 40W tube light. Make: Philips etc. complete as directed by the Engineer-in-charge.

Basic Code No.3127 Supply and fixing of 1200mm sweep double ball bearing ceiling fan. Make: Almonard/ Ushas etc. complete as directed by the Engineer-in-charge.

3.1 Earthing with G.I.medium pipe 3.0 mt long and 40mm dia including accessories 250 x 50 x 6 mm G.I clamp with 12mm bolt, nut and washer for connecting earth wire, RCC ring enclosure and cover plate complete as required

10.2 Structural steel work riveted , bolted or welded in built up sections , trusses and framed work , including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer all complete

10.20 Providing and fixing bolts including nuts and washers complete.

Basic Code No.1372F Supply and fixing of 200mm dia (Rubber insertion for flanged pippe joints) etc., complete as directed by the Engineer-in-charge.