SPECIAL REPAIRS TO WATCH TOWERS NO 2 AND 3 AND PROVISION OF LIGHT FITTINGS WITH CONNECTED ITEMS FOR PARKING SHED TO FFICER AND SAILORS MARRIED ACCOMMODATION AND CERTAIN MINOR WORKS AT INS KATTABOMMAN UNDER GE TIRUNELVELI

Amount

SCHEDULE 'A' PART -I(B/R PORTION)

Demolition of Reinforcement cement concrete for Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended workof complete all as specified and directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation including necessary form work all as specified and as directed.

Material and labour for Reinforced cement concrete M-30 (Design mix) 20mm graded aggregates in foundations, including rafts, footing, foundation beams; complete all as specified and directed.

Material and labour for Reinforced cement concrete M-30 (Design Mix) 20mm graded aggregates in staircases, landing of staircase, including steps and parapet wall etc. complete all as specfied and directed.

Material and labour for Reinforced cement concrete M-30 (Design Mix) 20mm graded aggregates in in beams, cantilevers, lintel over 1.5m span etc. complete all as specfied and directed.

M&L formwork to sides of concrete, foundations, footing, bases of columns, raft and raft beams, sides of soffits (if any) of foundation and plinth beams ; and similar work; vertical or to batter to give rough finished to flat surfaces of concrete complete all as specified and as directed.

M&L formwork to staircases with sloping or stepped soffits including risers and stringers complete all as specified and as directed.

Material and Labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and Labour for reinforcement Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Material and labour for 20-25mm thick machine cut kota stone on vertical surface laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and machine polishing, laid over and including 10mm thick backing coat in CM 1:3 in floors complete all as specified and as directed. all as specified and as directed.

Material and labour for hard core with granite broken stone of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface all as specified and as directed.

Material and labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection 50mm thick complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:6, on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement all as specified and as directed.

Material and Labour for Three coats of white wash on wall surfaces including preparation of new surfuces complete all as specified and directed.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified .

Material and labour for providing plain cement concrete 1:2:4 type B0, using 12.5mm graded stone aggregate as in flooring 25mm thick finished even and fair all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as directed.

Material and Labour for vitrified ceramic tiles 10mm thick dark shade (Square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including provision of cement screed bedding layer 20 mm thick in CM 1 : 4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Material and Labour for vitrified ceramic tiles 10mm thick dark shade (Square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surface, over and including provision of cement bedding 10 mm thick in CM 1 : 3 set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Material and Labour Non skid ceramic tile 7-8mm thick area exceeding 0.06 Sqm and not exceeding 0.11 Sqm size (Square or rectangular)colour tiles in floor etc, laid over and including Screed bed or bedding layer 15mm thick in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match with as in floors complete all as specified and directed.

Material and Labour for Glazed ceramic coloured tiles in vertical surface 300 x 200x 7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including backing coat of 10 mm thick in CM 1:3 all as specified and directed.

Material and Labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate 100 mm thick in sub base of floors including necessary form work all as specified and as directed.

Material and Labour for Chequered cement concrete tile 200mm x 200mm x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including cement mortar bedding 20mm thick in CM 1 : 4 complete all as specified and directed.

Taking down cement mortar plaster/terrazo of any description on wall including racking out joints,hacking for key,scrubbing down with water etc complete as directed

Material and labour for 15 mm rendering in two layer, 10 mm thick in cement mortar (1:6) in dubbing coat and 5 mm thick in cement mortar (1:4) using water proofing compound @ 3 % by weight of cement in finish coat on other than fair faces of brick wall suerfaces, finished even and smooth without using extra cement complete. Note:- water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for 10 ,mm rendering in cement mortar (1:3) on concrete surfaces of ceiling,finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for two coats of distemper oil emulsion over new plastered surfaces including a coat of alkali resistant primer and prepration complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of weatherproof acrylic emulsion paint over a coat of primer paint etc complete.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Taking down chowkhat or frames (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutter and refixing in the same opening, of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Supply and fix powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply & fix powder coated anodised aluminium sliding window shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, anodised aluminum snap beading, roller screws etc. complete all as specifieds (Note- Glass shall be measured and paid separately)

Supply and fix powder coated Anodised aluminium window and ventilator shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fixing aluminum anodized grill DG 916 of 10 mm dia rod square , rectangular, circular or similar type of shape, aperture not exc 7 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) Make Grill No 20 of DECOREL or equivalent as approved complete all as specified and directed.

Supply and fix Sheet glass of 5.5mm thick, ordinary quality and glazing with glacin clips in square in exc 0.5 sq.m in each pane complete all as specified and as directed.

Supply and fix aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples complete all as specified and directed.

S&F for Solar control film 25 micron reflective type (gareware sun control or equivalent) in 3mm th sheet glass.

M&L solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squar tube and fixing in opening as per specification complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as specified and directed.

Supply and fixing stainless steel Butt hinges 100mm size fixed to PVC frames complete all as specified and directed.

M&L Aluminium anodised barrel tower bolt of extruded section and fixed 150mm long complete all as specified and directed.

M&L extruded aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and directed.

Supply and fix in repair for vitreous china orissa pattern water closet long pan size 580 mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime cement concrete bedding complete all as specified and as directed.

Supply and fixing Pedestal Wash basin of size 1090x1090 mm complete all as specified and as directed. Make : Cera :(1014 Calibre WB) or equilavent.

Supply and fixing,in repair 15mm bore fancy type chromium plated bib taps, cast copper alloy, with bib taps,cast copper alloy,with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Jaquar (ARI-39037) or equivalent as approved.

Supply and fixing in repai 15mm bore pillar taps fancy type quarter turn chromium plated screwed down high pressure,with or without lettered'Hot' or 'Cold' ,screwed for 15mm iron pipe complete all as specified and as directed. Make : Jaquar (ARI-39011) or equivalent as approved.

Supply and fixing in repair 15mm bore fancy type stop valves with flunge cst copper alloy screwed down high pressure,with crutch or butterfly handle screwed both ends for 15mm iron pipe complete all as specified and as directed. Make : Jaquar (ARI-39053) or equivalent as approved.

Supply & fixing in repairs peg set suitable with 6 Nos of hook with powder coated fixed to wall complete all as specified and as directed.

Supply and fixing in repairs 32mm PVC waste pipe for wash hand basin., 900mm long complete all as specified and directed.

Supply and fixing for PVC connections 15mm size with PTMT nuts of length 450mm complete.

Supply and fix in repair of PVC valveless syphonic action type flushing cistern 10 ltr capacity low level ,white with inlet,ball valve float and handle including flush pipe & brackets complete all as specified and as directed.

Taking up or down 15mm dia GI water tubing with fittings including cleaning for re-fixing or removing to store complete all as specified and as directed.

Taking up or down 20mm dia GI water tubing with fittings including cleaning for re-fixing or removing to store complete all as specified and as directed.

Taking up or down 25mm dia GI water tubing with fittings including cleaning for re-fixing or removing to store complete all as specified and as directed.

Supply and fix 3-layer PP-R polypropylene random copolymer pipes 15mm bore SDR 7.4 UV stabilished and anti microbial welded having thermal stability for hot & cold water including all PP R plain brass threaded fittings fixed complete in position (wall, ceiling & floor) all as specified and directed.

Supply and fix 3-layer PP-R polypropylene random copolymer pipes 20mm bore SDR 7.4 UV stabilished and anti microbial welded having thermal stability for hot & cold water including all PP R plain brass threaded fittings fixed complete in position (wall, ceiling & floor) all as specified and directed.

Supply and fix 3-layer PP-R polypropylene random copolymer pipes 25mm bore SDR 7.4 UV stabilished and anti microbial welded having thermal stability for hot & cold water including all PP R plain brass threaded fittings fixed complete in position (wall, ceiling & floor) all as specified and directed.

Material and labour Cutting chases, pinning in brickwall/stone/concrete block walls, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing, cutting not exceeding 10 cm all as specified and as directed.

Supply and fixing of 32mm dia CPVC Pipes & fittings on walls/ ceiling or laying in floors complete all as specified.

S&F in 75 mm PVC (SWR) floor trap plain with grating including jonting with solvent cement complete, all as specified and as directed.

Supply and fixing of 75 mm CI Nahani trap with PTMT gratings(minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 all as specified and directed.

Supply and fixing in repair grating doom 100mm dia stainless steel complete all as specified as directed.

Supply and fix in repair Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) double layered hoisted & fixed in position all as specified of 1000 ltrs capacity complete all as specified and directed.

Supply and Fix Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete.20mm dia complete all as specified and directed.

M&L for Cutting out cracks to V-section in existing roofs/walls or terracing, cleaning out, wetting,and grouting with cement and sand slurry 1:3 mixing with water profing compound as approved, complete all as specified. (WPC should measured and paid separately)

Demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoints, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete.

M&L Brick work with sub class 'B' old size built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

M&L Brick work with sub class 'B' old size built in CM 1 : 6 except bricks, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard / dense soil complete all as specified and directed.

M&L for providing reinforced cement concrete (nominal mix) in foundations, including rafts, footings, foundation beams; plinth beams ; bases for columns 1:2:4 type B-1 (using 20mm graded aggregate) etc complete all as specified and directed.

Removal of excavated soil to a distance exceeding not exceeding 50m and depositing where directed complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate 50mm thick in sub base of floors including necessary form work complete all as specified and as directed.

Supply and fix for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.

Material and labour for roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.

Prepration of new steel surface of any description not exc 60cm in girth and applying two coats of synthetic enamel paint over a coat of rex oxide primer complete all as specified.

Supply and fixing galvalume single skin corrugated profiled roofing sheet of 0.50mm thickness (Total coated Metal thickness) having tensile strength of 550 MPa, coated with hot dip metallic zinc aluminium alloy coating zincalume AZ-150 or equivalent (as per AS 1397) @ 150 gms/sqm, total on both sides of ZN (45%) & AL (55%), with super polyester colour bond XRW quality paint coat or equivalent as per AS/NZS-2728 (Category 3-4) of approved colour, total coating thickness of 35 microns of a super polyester XRW quality paint system or equivalent comprising of 20 microns (NOM) exterior coat on top surface and 5 microns (NOM) reverse coat on back surface over 5 microns (NOM) primer coat, on both surface, of approved colour shade fixed with GI self tapping fastening bolt/screw as in roof covering/cladding etc as per manufacturers instructions complete all as specified and as directed.

M&L for cement concrete type C-2 , 1 : 3 : 6 (using 40mm graded stone aggregate) in foundation and filling concrete for columns, fencing posts etc complete all as specified and directed.

Supply and fix mild steel frame work as in fencing posts, struts and similar work etc with 5mm thick fillet weld for holding concertina coil and similar work conforming to Fe-410-0 complete all as specified and as directed.

S&F for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and srewed the other or screwed both ends each screwed end to be fitted wth washers and one hexagonal or square not exceeding 5 cm long and diameter of neck 5 to 10mm complete all as specified and as directed.

Supply and fixing chain link fencing, MS galvanised of size 100mm mesh, 4mm dia fixed to any type of standards, rails straining bolts including provision of binding wire complete all as specified and as directed.

M&L mild steel round bars Fe 410W (Gde E-250) quality-A, 10mm dia and over cut to length, bent to shap required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel framed work of Gde Fe-410-0 as in gates made of angle and other sections with gusset plate, rails, braces etc. complete including drilling and welding for fixing of steel sheets or other covering of doors, gates etc to be prepared for hanging or sliding with and including hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering , running rails and guides etc) and hanging also fastening of Fe 410 -W (Gde- E- 250) quality-A and fixing complete all as specified.

S&F Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples, size of mesh in 25mm complete all as specified.

Material and Labour for Two coat of synthetic enamel paint over a coat of red oxide to new steel surface including preparation complete all as specified and directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate cast in situ as in copings and the like including weathering, slightly rounded or chamfered or chamfered angles as directed including use of form work as necessary all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4, on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement all as specified and as directed.

Material and Labour for preparing new cement surfaces & applying two coat of cement base paint on walls including one coat of primer etc complete all specified and as directed.

Material and Labour for writing letters or figures (Block, Roman, Italic) not exc 30 cm high with flouorescent paints complete.

Supply and fixing of welded steel wire fabric complete to wood or steel members weight not exe 4.00 Kilogram/Sqm

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of width not exc 10 cm width or girth and all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15 cm deep in soft/loose soil and getting out complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate 40mm thick in of floors including necessary form work finished even and smooth without using extra cement with trimix machine complete all as specified and as directed.

Material and labour for Synthetic floor of ITF classified imported material (Refkim made in Europe)in 4 layers system Acrylic for synthetic floor complete all as specified and as directed. Note:-(1 Layer) Concrete primer, (1 Layer) Resurfacer, (2 Layers) Top coat Light Blue, White Line Marking as per manufacturers instructions.Work shall be carried out through authorized Agency/Dealer as approved by GE only.

SCHEDULE 'A' PART-II (E/M Portion)

Supply and fix for Point wiring with two single core 1100 V grade conforming to IS-694 PVC insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor drawn through and including 20mm dia stove enamled Steel conduit and conduit accessories fixed on surface making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for One light/fan/Bell/ss independent point controlled by one one-way switch SP 5 Amps

All as per Item No. 101 above, but using 2.5 sqmm FRLS single core multi stranded copper conductor cable and 2.5 Sqmm FRLS copper earth wire cable drawn through 20 mm dia stove enamled Steel stove enamled Steel conduit including provision of conduit and conduit accessories connected to all metal boxes and common earth dolly all as specified for One light/fan/Bell/ss independent point controlled by one one-way switch SP 5 Amps.

Supply and fix for Point wiring with two single core 1100 V grade conforming to IS-694 PVC insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor drawn through and including 20mm dia rigid PVC conduit and conduit accessories fixed on surface making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for One light/fan/Bell/ss independent point controlled by one one-way switch SP 5 Amps

Supply and Fix Switch flame proof one way 10Amps single pole 220V to 240V electrcal switch inclusive of suitable size of switch box and sheet cover all as specified and directed. Make : Anchor Roma white 10AX or equilavent to any ISI make.

Supply and Fix of Switch Piano, flush type, Single Pole, 230 Volts, AC, one-way 5 Amps with ISI mark all specified and as directed. Make: Anchor Cat Part No 38739 or equivalent with ISI mark.

Supply and Fix Ceiling rose 3 terminals, surface bakelite 65 x 50mm complete all specified and as directed. Make : Anchor / Bajaj / Leader / Cona with ISI mark.

Supply and fix flame proof socket outlet 16Amps 5 pin multi socket all as specified and directed. Make : Anchor Roma white or equilavent to any ISI make.

Supply and fix flame proof LED tube light fitting 1x16W with lamp 20W including all necessary prewired electric connections all as specified and directed. Make : Crompton Cat No EXTN1LT8-16/20 or equilavent to Philips/ Bajaj.

Supply and fix Exhaust Fan of size 300 mm sweep, heavy duty, AC 230 V, 50 Hz, 1400 RPM with louvers shutter, frame ISI marked including starting capacitor and connecting to ceiling rose terminals 1.5sqmm 3 core copper flexible cable as required complete all as specified and as directed. Make: Crompton Greaves /Bajaj/Usha.

Cutting and breaking of required size of wall for mounting ezhaust fan and making good with cement motor plaster and painting to distrubed wall complete as specified amd directed.

Supply and fix of LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including Stellar bright 20 watt TLED box type complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including taking down existing fitting complete all as specified and as directed. Make : PHILIPS Cat No. Stellar Bright TLED 6500K with Batten or equivalent to C&S/Crompton

Supply and fix in repairs LED Security light fiiting 15 W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & bracket GI Tubing medium grade 1mtr long bend into shape including taking down existing fitting complete all as specified and as directed. Make : C&S Cat part No LTESSE15WLED or equivalent in Philips / Crompton Greaves.

Supply and fix of Sheet metal enclosures for DBs single pole 4 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all specified and as directed. Make : Legrand/ Asian /Indokopp/ Standard/ ABB .

Supply and fix in repairs for MCB SPN, AC 240 Volts 32 Amps 10 KA complete all specified and as directed.

Supply and fix in repairs MCB SP 240 V, 6A to 30 Amps 10 KA rupturing capacity complete all as specified and as directed.

Supply and fix LT under ground cable 1100 volts grade PVC /XLPE sheathed armoured multistranded heavy duty electric cable with aluminium conductor 2 core 16 Sqmm, laid in trenches/ duct / walls including cable gland on both termination where necessary including laying, connecting to various switches in panel board, testing and commissioning etc complete all as specified and directed. NOTE: Earth work excavation shall be measured and paid separately.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation/cable in soft/loose soil and getting out complete all as specified and directed.

Returning, filling in incl spreading leveling, watering and well ramming in layers n.exc.25cm thick complete all as specified and as directed.

Supply and spread natural river sand in trenches for cushioning and covering to cable complete all as specified and as directed. NOTE: Punned thickness shall be measured and paid.

Supply, lay in trenches burnt Bricks, old size, Sub class "B" for cable protection all as specified and directed.

Supply & laying tubes ' light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking down corroded GI tubing complete all as specified and as directed.

M&L for cutting the hard surface/ road of size 30cm x 30cm x 1Mtr for laying of UG cable and make good distrubed surfaces of as per existing surface/ concrete and fair finish all as specified and directed.

Supply and fix for clamp, bracket and GI tubing 40mm dia 1mtr length bent into shape for fixing of security light all as specified and directed.

Earthing complete with GI earth plate electrode 600 x 600 x 6.0mm buried directly in ground vertically to a depth not less than 2.25 M below GL with top edge of the earth plate not less than 1.5 M below normal GL connected with GI earth strip 32x6mm by means of bolts, nuts check nut and washers of GI and earth wire protected by GI pipe 40mm bore light grade and watering pipe 20mm bore GI pipe medium grade including one test point for testing purpose with funnel and connected to switch/control board upto 7.5m away from earth electrode including earth work, PCC (1:3:6) type C-1 chamber, RCC (1:2:4) type B-1cover slab 50mm thick with 8mm dia TMT bars reinforcement both ways at 140mm C/C, charcoal, salt, water pipe, wire mesh, lugs etc and testing complete all as applicable and as per Plate No. 3 of SSR 2009 and all as specified.

Supply, insatllation tesing and commissioning of Electric driven copper wound motor driven open well submersible pump set, working on three phase, 415V, 50 Hz, AC Supply, complete and the submersible pump hall be of following specification given for Crompton Greaves/equivalent in Kirloskar all as specified and directed. Specification for Crompton Greaves model CWPH17.52 Rating : CWPH17.52 Pipe Size - 80 x 65 mm HP / KW - 17.5 HP / 13.1 KW Head Range - 27 - 51 Mtr Discharge - 1500-500 LPM

supply and fix ML2 DOL (Heavy Duty) stater of capacity 20 HP 3 Phase 415 V 50 Hz submersible pump set of relay range 20-32 Amps including single phase preventer all as specified and directed. Make : L&T/schneider/HPL

Supply and fix HDPE pipe 63mm 8kg/sqcm IS:4984:1995, PE-63 as delivery pipe all as specified and directed.

Supply and fix flexible hose pipe of 80 mm as suction pipe all as specified and directed

supply and fix Flat submersible wire with bare bunched for 17.5 HP motor of 3 Core size 16 Sqmm 1100 volts PVC insulated all as specified and directed.

Supply commissioning and testing of 1.5TR BEE 5 star rated with inverter type split air conditioner electric driven single phase 230 volts of capacity complete all specified and as directed. Make : Blue star /Voltas/ Carrier

Point wiring with two single core 1100 V grade conforming to IS-694 PVC insulated unsheathed FRLS cables of size 2 run 4 Sq mm multi-stranded Copper conductor drawn through and including rigid PVC conduit and conduit accessories fixed on surface including breaking of walls and making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylom sheet cover with one run earth wire of PVC cable 4 Sqmm multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for one AC point controlled by metal clad switch complete all as specified and as directed.

Supply and Fix metal single pole and earth enclosure with two pin and earth plug with MCB, SP 16 Amps and steel enclosure complete all as specified and directed.

Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage at 230 V with accuracy of + or - 2.5% and 170 to 270 Volts suitable for 1.5 TR AC complete all specified and as directed. Make:- V Guard VG-400 or equivalent as approved.

Supply, Install, Testing and Commissioning of 'Solar Hot Water System' (Flat PlateCollector) based on indirect transfer of heat of capacity 100 LPD all as specified and as directed. Make:- V gaurd/Supreme Solar/SUN Max Energy System/Win Power System or equivalent as approved

Supply and Lay galvanised iron tubing medium grade 20 mm bore with all necessary fittings, cutting thread and laid in trenches/wall/floor all as specified and as directed.

Supply and fix stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle of 20mm dia screwed both ends for iron pipe or for unions complete all as specified and as directed.

SRI LAKSHMI GANESH ENGINEERING WORKS

VVM CONSTRUCTIONS

CHANDRASEKRAN ENTERPRISES

sri manikandan enterprises

Vinayaga constructions