REPAIRS REPLACEMENT SUCH AS JOINERY SANITARY FITTINGS FIXTURES PLUMBING FITTINGS PLINTH PROTECTION WPT PLASTERING ROLLING SHUTTERS OH TANKS ETC AT ZONE E AREA UNDER GE CHENNAI

Amount

Supply only liquid water proofing compound conforming to IS: 2645-2003 all as specified and directed.

M&L for brick work straight or curved on plan exceeding 6 metre mean radius using old size fly ash bricks built in cement mortar (1:6) all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4.0 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each including all fittings complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after cutting, easening etc. complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed.

M&L 40mm thick flush door shutter, solid core construction, with block board core and plywood face panels, commercial type on both side etc. complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass, gauge etc. without sash bars edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 100mm long all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.

S&F inrepairs continuous piano hinge mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F in extruded aluminium alloy handle cast type anodised 100mm size all as specified and directed.

S&F extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.

S&F floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

All as per item No. 19.00 above but fixed in repairs.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.

All as per item No. 21.00 above but fixed in repairs.

S&F in repairs mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repairs aluminium (Die cast) body door closer hydraulically regulated, designate No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg all as specified and directed.

S&F aluminium powder coated designer curtain rods (draw berms rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws including taking down the existing curtain rod of any description complete all as specified and directed.

S&F inrepairs aluminium powder coated designer brackets for curtain rod suitable for aluminium powder coated designer curtain rod all as specified and directed.

S&F in repairs Stainless steel cabinet hinges/self closing hinges/ auto hinge complete all as specified and directed.

S&F in repairs Magnet door catches for cabinet cupboard shutters etc complete all as specified and directed.

M&L cutting holes in brick/ stone walls built in cement mortar or cement lime mortar for inserting hold fats and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate for the required depth of embedded portion of holdfasts or lugs measured from the face of jamb into the wall n. exc. half brick including making good complete all as specified and directed.

S&F rolled mild steel round pipe or hollow section pipe work as in post and joist connecting with plates ceats and other connections, welding etc shall conform to Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills bolts etc and similar conforming to FE-290, Gde E 165 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering/ cladding to wall fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

M&L for servicing the rolling shutters of any size any type by taking down the cover, laths and complete accessories of rolling shutters and make functional including replacement of ball bearings, springs, gear and carrying out necessary welding works if required and applying grease as per the direction of Engineer-in-Charge.

M&L for 18mm thick plywood, grade BWR type BB with 0.90mm thick decorative laminates type-1 fixed with screws to timber frame work fixed in repairs complete all as specified and directed.

M&L for 18/ 19mm thick pre-laminated particle board, interior grade, pre laminated one side with decorative choice lamination and other side balancing white laminations fixed with screws to timber frame work including dismantling of existing boarding any description fixed in any position complete all as specified and directed.

M&L APP modified prefabricated five layer water proofing membrane matt finish, 3mm thick and weighing not less than 3.6 kg/sqm reinforced with non woven polyester matt black finished over one coat of bitumen primer @ 0.40 Litre/ Sqm and torch application of membrane using gas burner with 100mm overlap as per manufacturer's instructions with top most layer of surface finished with bituminous aluminium paint all as specified and directed. Notes: (i) The work shall be executed through Manufacturer's applicator approved by GE. (ii) The quoted rate is deemed to include the cost of digital photograph and plaster plate as per PS.

M&L 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floor/ padding on terrace finished fair and even complete all as specified and directed.

M&L 100mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring, finished even and smooth using extra cement complete all as specified and directed.

M&L 75mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.

M&L for vitrified light shade coloured ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

All as per item No. 44.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per item 47.00 above for work on vertical surfaces such as skirting, dados and risers as in steps etc., laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:3) on fair face of brick wall or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:6) on fair face of brick wall or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of new surface and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

All as per item No. 60.00 above but 20mm bore.

S&F 500 ltr capacity double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 ltr capacity double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 25mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe including taking down old one complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 25mm bore pipe, weight not less than 455gms, high pressure with polyethylene high density float and complete screwed for iron pipe including taking down old one complete all as specified and directed.

S&F 15mm dia bib taps brass chromium plated, fancy type, with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F 15mm dia bib taps brass chromium plated, fancy type, long body with flange plate fixed in repairs, as per Cat No. 8308 of Prayag complete all as specified and directed.

S&F 15mm dia angle cock with flange brass chromium plated, fixed in repairs, as per Cat No. 8310 of Prayag complete all as specified and directed.

S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and directed.

S&F 15mm dia hot and cold mixer type pillar tap, fancy type of cast copper alloy with capstan head, chromium plated, screwed down, high pressure with screwed long shank and fly nut for iron pipes fixed in repairs

S&F in repairs cover for rotational moulded polyethylene water storage tank of capacity 250 litre to 2000 litre provided with hinge device and locking arrangement and fixed in position complete all as specified and directed.

S&F in repairs CP waste coupling heavy (full thread) of size 32mm brass as per Cat No. BEA-11 of make Prayag all as specified and directed

S&F in repairs 600mm long CP towel rail as per Cat No. BA-20 of make Prayag all as specified and directed

S&F in repairs CP concealed stop cock regular body 15mm size with flange plate as per Cat No. 8318 of make Prayag all as specified and directed

S&F in repairs CP 125mm size overhead shower ABS round with 225 brass arm & flange as per Cat No. BS-69 of make Prayag all as specified and directed

S&F in repair PVC waste pipe for wash hand basin (size 31/ 32mm x 800mm length) all as specified and directed. Make: Prayag Cat No. 327 or equivalent from other makes specified in particular specifications.

S&F in repair PVC waste pipe for SS Sink (size 31/ 32mm x 1150mm length) all as specified and directed. Make: Prayag Cat No. 330 or equivalent from other makes specified in particular specifications.

S&F in repairs PTMT cabinet mirror 400 x 500 mm with sided shelves fancy type of superior quality all as specified and directed complete all as specified and directed.

M&L vitreous china wash down water closet pedestal pattern white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. fixed in repairs complete all as specified and directed.

Supply and fix plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580 x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

S&F in repairs health faucet (hand shower) with 1.0metre long PVC tube with wall hook, chromium plated as per Cat No. BEA-87 of Prayag all as specified and directed by the Engr-in-Charge.

S&F in repairs 15mm dia chromium plated 2 way angle cock with flange as per Cat No. 8311 of Prayag complete all as specified and directed.

S&F in repairs CP sink cock reuglar spout with flange as per Cat No. 8316 of Prayag complete all as specified and directed.

S&F in repairs 15mm dia chromium plated bib cock with nozzles with flange as per Cat No. 8305 of Prayag complete all as specified and directed.

S&F PVC low level flushing cistern 10 ltr with complete accessories such as PVC flush pipe, over flow pipe etc. and connected to water closet as per manufacturers instruction and as directed by the Engr-in-charge fixed in repairs complete all as specified and directed.

S&F in repair 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

S&F in repair CP Square trap size 101mm x 101mm as per Cat No. FT-73 of Prayag complete all as specified and directed.

S&F in repair 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in repairs toilet paper holder with flap recessed type matt chromium plated as per Cat No. BEA-38 of Prayag all as specified and directed by the Engr-in-Charge.

S&F in repairs soap dish, matt finished chromium plated (MCH/ Colour CP) as per Cat No. BEA-25G of Prayag all as specified and directed.

S&F in repairs corner glass shelf superior quality, matt finished, chromium plated (MCH/ Colour CP) with bracket and fittings as per Cat No. BEA-52 of Prayag all as specified and directed.

S&F in repairs glass shelf matt finished, chromium plated (MCH/ Colour CP) 600mm long with bracket and fittings as per Cat No. BEA-53 of Prayag all as specified and directed.

S&F in repairs stainless steel sink with draining board of overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm made out of 1mm thick stainless steel sheet of grade AI SI-304 with plugs, washers, waste coupling and 40mm dia waste pipe, fixed over CI brackets and connecting union to pipe etc., compete all as specified and directed. Make: Prayag or equivalent from other makes specified in Particular specifications.

S&F in repairs stainless steel 1mm thick sink kitchen or laboratory overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm with plugs, washers,waste coupling and 40mm dia waste pipe, fixed over CI brackets and connecting union to pipe etc., compete all as specified and directed.

S&F in repairs brass chromium plated wall mixer valve 2-in-1, fancy type with L bend (provision of overhead shower) as per cat No. 8375 of Prayag complete all as specified and directed.

S&F in repair stainless steel plate rack of size 31" x 36" x 10" with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of good quality all as specified and directed. Make: Prayag Cat No. P-348 or equivalent from other makes specified in Particular Specifications.

S&F in repair stainless steel plate rack of size 24" x 30" x 10" with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of good quality all as specified and directed. Make: Prayag Cat No. P-330 or equivalent from other makes specified in Particular Specifications.

S&F in repairs brass chromium plated towel ring square as per cat No. BA-11 of Prayag complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins/ arches/ pillars etc. but excluding ashlars facings, dressed stone work, precast concrete articles and removal of the debris outside MD land complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above GL including removal of debris to outside MD land complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge and thickness including Nainital or similar pattern roof covering all as specified and directed.

Dismantling posts or struts (wood, steel, RCC) any section including taking out embedded portion in concrete and making good disturbed ground complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise specified.

Disconnecting existing tanks setting aside (or lowering if required) for cleaning and removing all scales and dirts etc from tanks and from mouths of circulating pipes etc and reconnecting and refixing in position of tank capacity exc 250 ltrs and n.exc 500 ltrs capacity PVC water tanks complete all as specified and directed.

Disconnecting existing tanks setting aside (or lowering if required) for cleaning and removing all scales and dirts etc from tanks and from mouths of circulating pipes etc and reconnecting and refixing in position of tank capacity exc 500 ltrs and n.exc 1000 ltrs capacity PVC water tanks complete all as specified and directed.

M&L for attending minor complaints of joinery such as wooden/ steel/ aluminium of any description including pelmet box, cupboards, door springs, rolling shutters etc. requiring carpentry work like adjusting and easing, cutting, pinning, welding and finally good etc. and functioning to seating over with each other with tightening of screws/ nails, doors, helical springs, door closers etc. including supply of screws, nails, plugs, grease etc. to make it functional as in day to day maintenance work complete all as specified and directed.

M&L for attending minor complaints of plumbing & sanitary fittings including water leakage from taps, WC's, flushing systems, urinals, wash basins, flushing pipe, bottle traps, tank delivery pipe lines etc. and any obstruction in water supply in rooms/ quarters involving plumbing work including supply and replacement of screws, nails, washers, check nuts, short pieces, unions, elbows, couplings, tees, tightening fittings of flushing cisterns, M-seal etc. complete all as specified and directed.

rc enterprises

KS CONSTRUCTIONS

Sri Aruna Associates

SHRI BALAJI CONSTRUCTIONS