Supply and Installation of Flood lights at Cricket Field in Central Park Shastri Nagar, Kanpur.

Amount

Feeder Pillar: Supply & erection of factory fabricated and wired metal clad dust & vermin proof floor mounted Automatic Cubical Control Panel double door painted etc Complete in all respect. Incomer MCCB 160Amp 4 Pole 25 kA with Spreaders 1 Nos Digital Metering on Incomer 1 Nos Outgoing MCCB 63Amp 3 Pole with Spreaders 4 Nos Power Contactor SOAmp 3 Pole 4 Nos Time Switch Daily Sdail 24 Hrs 4Nos Auto Manual Switch 4 Nos

LT CABLES & TERMINATIONS Supply, laying, testing and commissioning of 1100 V grade, armored,, XLPE, aluminium(AL) / Copper (CU) conductor cables on existing trays/walls/columns/ indoor including the cost of supports with suitable clamps, saddles, hooks, bolts etc. & in ground/trenches including the cost of proper dressing of cables, markers providing identification tags, sand filling etc. (cost of excavation, sand & bricks, included here) earthling of glands armoring etc complete as per specifications as required and as below. 3.5 core 35 sq mm AL. Conductor

Supply and fixing of multi core round FRLSH PVC insulated copper (flexible) conductor & PVC sheathed cables 1100Volts as per IS:694-1990 of specifications and schedule, complete as required for LED lights. 3C X 1.5 Sqmm

Supplying and installing double wall corrugated pipes (DWC) of HDPE (IS 14930 Part II -marked) for cable laid underground with necessary material and at required depth upto 90cm. below road/ground surface, including excavation, back filling with excavated material ramming and making the surface good. 75.00mm outside dia.

EXTERNAL LIGHTING FIXTURES Supply of LED Floodlight enabled with high power LEDs with anti- aging and anti-UV temperature -resistant lenses as per IS 10322(Part5/sec.5),Operating Voltage Range 140-300V/AC, Operating Temperature Range: -10°C to +50°C,Rated Voltage 220-240V/AC,50HZ,System Wattage 500W±10%, Power Factor >0.95,Athd<10%,Driver Efficiency>85%, , Minimum Product Lumen Output 60,000 lm± 10%, Efficacy≥110lm/W,CRI >70 Ra,CCT 5700±355K(As per ANSI),Housing Die Cast Aluminium with Powder Coating , Optics Poly Carbonate Modular Lens,Weight should be less than 14.0 Kgs.(Tol±5%),Protections: Impact Protection (IK) IK08, Surge Protection 5.0KV(with External SPD 10KV),Over Voltage Protection Make of LEDS-LEDS OF CREE/LUMILED/OSRAM/NICHIA/SEOUL/BRIDGELUX. Luminaire shall have minimum surge protection of 4KV in the driver & 10KV external surge protection device integral to the luminaire Both the luminaire & driver shall be BIS registered. Related documents to be submitted along with the technical bid.Luminaires LM79 Report must be submitted along with the technical bid.All drivers must be potted with silicon/Tar filled.Not withstanding anything stated above the bidder will not be considered further.The authorities have reserves the right to asses the bidders capabilities to execute the contract.

Supply of Stadium mast suitable to install suitable no. of luminaries with , other manufactured items as per standard practice and manufactured design sutaible for wind pressure of Kanpur as per IS:875 (Part-III) The mast shaft shall be manufactured from high tensile steel plates confirming to BS EN 10025 having minimum yield strength of 355N/Sq. mm. The height of the mast from base upto top of head frame shall be 18.0mtrs. The mast structure shall be fabricated from special steel plates, conforming to minimum ASTM A 572 Gr 50 with minimum yield 350 mpa, cut and folded to form a polygonal section and welded. Silicon content of the steel shall be less than 0.06% to assure a better and lasting quality for galvanising, Material Test Certificates showing the Chemical Composition need to be provided at the time of delivery provided from the Steel Manufacturer only against the material used for the manufacturing of the subject masts, No circumferential welded joints shall be provided in individual sections. The welding shall be in accordance with AWS. The procedural weld geometry and the workmanship shall be exhaustively tested on the completed welds. The mast shall be provided with base plate, which shall be free from any lamination or incursion. The welded connection of the base flange shall be fully developed to the strength of the entire section. The base flange shall be provided with supplementary gussets between the bolt holes to ensure elimination of helical stress concentration. The base plate and gussets shall be welded to the bottom section of the mast before dipping in the galvanizing bath. The base section of the mast shall be complete in all respects with base plate and gussets before hot dip galvanising internally and externally as per ASTM A 123 and 153. Width and depth of the galvanizing bath shall be more than the outer diameter of the base plate of the mast. All sections shall be hot dip galvanized in single dipping method. No site welding or bolting shall be done on the mast shaft. The minimum over lap distance shall be 1.5 times the diameter at penetration. The top/bottom diameters and plate thickness of the mast shall be decided based on proper design confirming to IS 875 and ASCE-48. The design life of the mast shall be a minimum of 25 years.

Supply of Advance Maintenance Free Earthling environment friendly Chemical Earthing system consisting of 1no. of 3 mtr length,17.2 mm dia earth electrode made of steel circularrods, molecularly bonded copper on outer surface with terminals to connect conductor with 1bag (30Kgs)

M/S HD ELECTRICALS

M/S SHIDDHI ENTERPRISES