Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.5 LAccepted-AOC | L1 | Accepted-AOC L1 bidder lowest | |
| 2 | L2₹47.9 L+₹3.4 L (7.73%)Rejected-Finance 1476 SARASWATI COLONY CHERITAL JABALPUR | JABALPUR | MADHYA PRADESH | 482001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹49.8 L+₹5.4 L (12.1%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹50.0 L+₹5.5 L (12.4%)Rejected-Finance MAIN ROAD RANJHI JABALPUR 482005 M P | JABALPUR | MADHYA PRADESH | 482005 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹53.3 L+₹8.9 L (20.0%)Rejected-Finance 712 GORAKHPUR JABALPUR 482001 MP | JABALPUR | MADHYA PRADESH | 482001 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
21 Dec 2021, 6:00 pmClosed
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No. 54 Jabalpur Cantt-482001 (MP)
SPL REPAIR OF REWIRING AT VTC (HR-16) 1 TTR 1STC, CONVENTIONAL TYPE LIGHT FITTING WITH LED LIGHT IN AOR MH AND REPLACEMENT OF BER CEILING FAN IN THE AREA OF AGE E/M E/S UNDER GE (WEST) JABALPUR
2021_MES_491628_1
8398/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (West) Jabalpur
As per Tender documents
5 documents required · 5 mandatory
₹500
GE (West) Jabalpur
₹94,000
14 May 2022
30 Nov 2021
23 Dec 2021
30 Nov 2021
21 Dec 2021
7 Dec 2021
1 Dec 2021 - 4 Dec 2021
Amount
Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings of any type and size with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge.
S&F in replacement Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing in to PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6.0 Sqmm & one run of 4.0 Sqmm cable shall be measured as one unit run.
S&F in replacement Sub main wiring with two single core PVC Insulated cable two run of size 4 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing in to PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 2.5 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire including making good disturbed surface to match existing complete all as specified & directed. Note : - Two run of 4 Sqmm & one run of 2.5 Sqmm cable shall be measured as one unit run.
Material & Labour in replacement for concealed Point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLS cable 1100 Volts grade drawn into and including concealed PVC conduit medium grade not less than 20mm (ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including inner outer plates cover for mounting modular switches, sockets, fan regulators fixed with CP screws with cup washers and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge.
(a) One light/fan point controlled by one switch.
(b) One socket point 5 Amp controlled by one switch on same board.
(c) One socket point 5 Amp controlled by one switch on Independent board.
(d) One bell point controlled by one bell push button independent board.
(e) One light point controlled by two way switch.
Description same all as per above item but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge.
Supply & Fixing Modular switch flush button type single pole one way 6 Amps of polycarbonate complete all as specified & directed.
Supply & Fixing switch piano flush button type single pole two way 5 Amps (duly marked for light / fan etc on the body of switch) of polycarbonate complete all as specified & directed.
Supply & fixing call bell ding dong sound type suitable for AC 240 volt single pole complete all as specified & directed.
Supply & Fixing switch bell push flush type suitable for 5 Amp 230 Volt of polycarbonate body complete all as specified & directed.
Supply & Fixing socket outlet 2 in 1, 5 Pin 5 Amp flush type of polycarbonate body complete all as specified & directed.
Supply & Fixing Switch socket combination 2 in 1, 3 pin / 5 Amp and 15 Amps flush type universal of polycabonate body complete all as specified & directed.
Supply & Fixing lamp holder / batten or angle holder with 9 watt led bulb Insulated body with back plate suitable for batten fittings complete all as specified & directed.
M/L for Ceiling rose surface bakelite three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge Make- Anchor, Plaza, Leader.
S & F fan regulator Modular type rotary type step 120/280 watt capacity of polycarbonite complete all as specified and directed by Engineer in charge.Make- Anchor, Plaza, Leader.
Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification Make : Philips Cat part BN 021 LED 22S 6500/4000 PSU GR or equivalent
S & F LED Smartbrite batten light fitting complete with extruded aluminum housing with high quality poly carbonate diffuser of 12 watt capacity complete with fixing arrangements on wall all as specified and directed.Make-n phil;ips Model No 021 LED 125 6500 PSU GR or equvalent of Bajaj and havells/surya
Supply and fixing of decorative wall light fitting made up of predie cast housing IP 65 protection against dust and water of 6.5 watt complete with fixing arrangements on wall all as specified and directed. Make: Philips model No WT140WLED CWPSU S1PC or equivalent in Bajaj/Havells /Surya
Supply & Fixing Bulk head endura LED light fitting high ingrres protection IP 66 protection compact intgral design pressure die cast housing with robuust polycarbonate cover complete making necessary electric connection to ceiling rose with copper conductor of suitable size and accessories & length complete all as specified & directed. Make philips Model no WT202WLED 65 CWPSU S3PC or Equivalent make BAJAJ/ havells /Surya
S&F LED light fitting square 60x60 CM Not less than 36 watt along with fixture Recessed mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.Make: Philips cat part no: RC 380 B LED 25 S-6500 G5 L60W60 PSU OD or equiv in bajaj/havells/Surya
Supply & fix LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make: Philips Model No BRP042 LED 25 CW R1S1PSU GR or Philips/luker/surya
S&F LED ceiling light fitting297mm x1197 mm LED Luminair extruded aluminum housing 8.2 mm depth only 33 watt capacity Recessed LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired , connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make:Philips RC 375 BLED 305/865 PSU 3 30L 120 S2 WH or equiv in bajaj/ Surya/havells
S&F LED ceiling light fitting LED Luminair Suspended light decorative slim capacity 36 watt with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired , connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Surya cat SLE BLSM 36S LL AURORA I or philips / bajaj/havells
S&F LED ceiling light fitting 2' x 1' along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired , connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Havells cat part no: PLUTO2X1PLR20WLED840S or equiv in bajaj/Philips
Supply & Fixing of Kit Kat DB by SPN Distribution Box, with acrylic door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, C charactorstic confirming to IS 13032 & 8623 complete all as specified and directed. Cat No. Legrand cat no 507621 equivalent model in Schneider (Electric)/Hager as approved by GE (I).
Supply & Fixing of Kit Kat DB by SPN Distribution Box, with acrylic door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, C charactorstic confirming to IS 13032 & 8623 complete all as specified and directed. Cat No. Legrand cat no 507620 equivalent model in Schneider (Electric)/Hager as approved by GE (I).
Supply & Fixing MCB SPN, 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make legrand cat no 408617 or equivalent model in Schneider Electric/Hager as approved by GE (I).
Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make - legrand cat no 408595 to 408595 equivalent model in Schneider Electric/Hager as approved by GE (I).
Supply & fixing in replacement of AC/Geyser box by sheet steel enclosure in single pole and neutral fitted with two pin and earth plug and socket complete with one single pole MCB, 240 volt, 20 Amps , 'C' series of suitable rating complete all as specified and directed . Make- Legrand cat no 507814 or Schneider Electric/Hager as approved by GE (I).
Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan/Exhaust fan including exhust fan louvers , scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint all as specified and directed.
S&F of fan regulator step type capacity of polycarbonite complete all as specified and directed by Engineer in charge.
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.Make:Bajaj,havells or equivalent.
Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed..Make : Legrand CAT NO 507611 / SIEMENS CAT NO 8 GB 32102RC8/GE
S&F in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 100 amps, 16 KA, TP, 415 volts, 50 Hz = 01 No.Make: LEGRAND/SCHNEIDER/SEIMENS
Supply & fixing integral post top lanterns complete with Black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories with 10watt LED lamp , GI pipe as required to fix in gate piller complete all as specified and directed .Make:Havells cat part no :RUBYMINIPT15WLED757PSYMTOPC or eqv in philips
Supply & fixing electronic energy meter tamper proof design digital technology of 3 phase 3 x 240 volts 50 HZ 0.4% basic current for direct connected meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp / 5 Amp CT operated with CT with optical communication port complete with all accessories complete all as specified & directed at site .Make:Secure/HPL
Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.
Supply & Fixing in repair sheet metal enclosure MCB DB Single door [Acrylic], single pole and neutral, 240 volts,2 way with blanking plate wherever required and IP-43 degree protection complete all as specified & directed
Supply , laying, testing and commissioning LT underground cable 1100 volts grade, XLPE insulated , 35 Sqmm 3.5 core screened, PVC sheathed Heavy duty armoured with multi stranded aluminium conductor laid in pipes, trenches/ducts, on poles and wall etc of undermentioned sizes complete all as specified and directed by Engineer in charge.
Supply , laying, testing and commissioning LT underground cable 1100 volts grade, XLPE insulated , 10 Sqmm 2 core screened, PVC sheathed Heavy duty armoured with multi stranded aluminium conductor laid in pipes, trenches/ducts, on poles and wall etc of undermentioned sizes complete all as specified and directed by Engineer in charge.
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil
Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia of Make;-Telerex/Tirupati or E-in-C approved Make
M&L for Demolition of road/path /concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) .complete all as specified and as directed.
M&L for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz, 5 Star rating , single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by Engr -in charge Make :- Havells Efficiencia Neo or Eqv in Bajaj/ Orient
RAINA SALES AND SERVICES
kiran electrical and hardware centre
RAVINDRA ELECTRICAL
RAVI TEJ BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .