Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.6 LAccepted-AOC D12 GROTH CENTRE COLONY BIJAULI JHANSI U P | JHANSI | UTTAR PRADESH | 284001 | ₹44.6 L Quoted ₹45.7 L | L1 | Accepted-AOC being L1 bidder |
| 2 | L2₹47.2 L+₹1.5 L (3.22%)Rejected-Finance NEAR GURUDWARA JHANSI BHOPAL ROAD SAUGOR M P 470002 | SAUGOR | SAGAR | MADHYA PRADESH | 470002 | ₹47.2 L+₹1.5 L (3.22%) | L2 | Rejected-Finance Not being L1 bidder |
| 3 | L3₹50.0 L+₹4.3 L (9.44%)Rejected-Finance 1442 1 NANADANPURA BABINA CANTT TEHSIL DISTT JHANSI UP | BABINA | JHANSI | UP | ₹50.0 L+₹4.3 L (9.44%) | L3 | Rejected-Finance Not being L1 bidder |
| 4 | L4₹53.5 L+₹7.8 L (17.1%)Rejected-Finance | ₹53.5 L+₹7.8 L (17.1%) | L4 | Rejected-Finance Not being L1 bidder |
| Sl No | Description | Qty | Unit | v k builder L4 | sagar motor and tractor co L2 | M/S SHIVA TRADERS L3 | FTH TRADERS L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.
Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.
(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. | 80 | Each | 100 ₹8,000 | 200 ₹16,000 | 50 ₹4,000 Lowest | 175 ₹14,000 |
| 2.00 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.
Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.
(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder | 44 | Each | 100 ₹4,400 | 300 ₹13,200 | 50 ₹2,200 Lowest | 125 ₹5,500 |
| 3.00 | M&L for Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm long including MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engineer-in-charge. [Single shutters of approx width 0.8 to 1.2 m and ht 1.9 to 2.10 M.] | 6 | Sqm | 4,000 ₹24,000 | 7,000 ₹42,000 | 3,300 ₹19,800 Lowest | 3,500 ₹21,000 |
| 4.00 | M&L for mild steel framed work such as grills gratings, sun shed cover fixed with nut bolts incl, cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framed work or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed. | 700 | Kg | 100 ₹70,000 | 80 ₹56,000 Lowest | 105 ₹73,500 | 110 ₹77,000 |
| 5.00 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, supplying & fixing in opening as per specification.
Note: The cost of fasteners (10mm dia, 100mm long, min 6 Nos.) shall be deemed included in quoted unit rates. | 72 | RM | 430 ₹30,960 Lowest | 600 ₹43,200 | 500 ₹36,000 | 450 ₹32,400 |
| 6.00 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. | 20 | Sqm | 3,800 ₹76,000 | 5,500 ₹1,10,000 | 3,600 ₹72,000 | 3,200 ₹64,000 Lowest |
| 7.00 | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed.
Note : Aluminium section(s) thickness shall not be not less than 1.50 mm. | 4 | Sqm | 6,000 ₹24,000 | 7,000 ₹28,000 | 4,000 ₹16,000 Lowest | 4,800 ₹19,200 |
| 8.00 | S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 32mm side and top of size min 92.34X29.70, shutters vertical 39X20 mm, shutter top & bottom of size min 20X39 mm , shutter interlock min size 39X20 mm with rollers and concealed locking arrangements with 4 mm thick tinted glass with rubber gasket ,brush and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45 mm etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed.
Note : Aluminium section(s) thickness shall not be not less than 1.50 mm. | 50 | Sqm | 7,000 ₹3,50,000 | 4,000 ₹2,00,000 Lowest | 6,500 ₹3,25,000 | 5,500 ₹2,75,000 |
| 9.00 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.
Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. | 110 | RM | 580 ₹63,800 Lowest | 700 ₹77,000 | 600 ₹66,000 | 800 ₹88,000 |
| 10.00 | S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc , one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.
Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. | 73 | RM | 630 ₹45,990 Lowest | 700 ₹51,100 | 700 ₹51,100 | 850 ₹62,050 |
Tender Value
₹46.6 L
EMD Value
₹93,200
Closing Date
1 Jun 2026, 6:00 pmClosed
GARRISON ENGINEER SAUGOR
GARRISON ENGINEER SAUGOR Military Engineer services Garrison Engineer Saugor MP- 470001
SPL REPAIR TO BLDG NO F-68 AT HAWK HILL UNDER AGE B/R-II OF GE SAUGOR
2026_MES_764463_1
GE/SGR/TOK-13 OF 2026-27
Open Tender
Civil Works
Item Rate
180 days
Saugor
Class D category a (i) and as per tender documents
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹93,200
Yes
14 Sept 2026
9 May 2026
3 Jun 2026
9 May 2026
1 Jun 2026
25 May 2026
9 May 2026 - 15 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.
Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.
(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. | 80 | Each | - | - |
| - | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.
Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.
(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder | 44 | Each | - | - |
| - | M&L for Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm long including MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engineer-in-charge. [Single shutters of approx width 0.8 to 1.2 m and ht 1.9 to 2.10 M.] | 6 | Sqm | - | - |
| - | M&L for mild steel framed work such as grills gratings, sun shed cover fixed with nut bolts incl, cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framed work or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed. | 700 | Kg | - | - |
| - | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, supplying & fixing in opening as per specification.
Note: The cost of fasteners (10mm dia, 100mm long, min 6 Nos.) shall be deemed included in quoted unit rates. | 72 | RM | - | - |
| - | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. | 20 | Sqm | - | - |
| - | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed.
Note : Aluminium section(s) thickness shall not be not less than 1.50 mm. | 4 | Sqm | - | - |
| - | S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 32mm side and top of size min 92.34X29.70, shutters vertical 39X20 mm, shutter top & bottom of size min 20X39 mm , shutter interlock min size 39X20 mm with rollers and concealed locking arrangements with 4 mm thick tinted glass with rubber gasket ,brush and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45 mm etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed.
Note : Aluminium section(s) thickness shall not be not less than 1.50 mm. | 50 | Sqm | - | - |
| - | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.
Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. | 110 | RM | - | - |
| - | S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc , one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.
Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. | 73 | RM | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.32 MB
GPTOK13.pdf
Tender Documents • 0.89 MB
BOQ_856237.xls
BOQ • 0.47 MB
PSTOK13.pdf
Additional Documents • 0.97 MB
DateCorrg02Tok13.pdf
PDF • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .