Additional works for providing amenities like Cupboard shutters, Shower with Shower arm, Health faucet arrangements and other essential development works for the Construction of 2 Nos. of SFO and 17 Nos. of Firemen quarters at Ranipet dist.Re-tender

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

WATER SUPPLY ARRANGEMENTS 51.1: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres (excluding free board) of approved brand (superior variety) with ISI Mark

ANNEXURE-I 2.1.1 : Supplying and filling with gravel

2.1.3 : Filling sand (using crushed stone sand)

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

6.5.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM²

10.5.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasriciser

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

ANNEXURE-II A1: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A2: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A3: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A4: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A5: Drilling of 6" dia (150mm) vertical bore well in Overburden soil including labour charges for insertion of casing pipe in the scheme area to required depth and as directed by the departmental officers .

A6: Drilling of 6" dia (150mm) vertical bore in hard rock areas anywhere in Tamil Nadu including transportation to the work site in hard rock areas and developing the borewells and as directed by the departmental officers.

A7: Supply, delivery and fixing of 160mm dia outer dia PVC casing pipe of 6kg/cm.Sq of approved quality with ISI mark.

A8: Supplying and fixing of 160mm dia PVC end cap for borewell of approved quality with ISI mark.

A9: Geophysical investigation charges under Deposit works per point.

A10: Supply and fixing of UG cables of Size of 4 to 25 Sq.mm and 2, 3, 3 1/2 , 4 core on walls and ceiling with necessary MS clamps and brass screws including cost of materials and redoing the dismantled portion in to the original position etc., all complete and as directed by the departmental officers. For Lift a) 3.5 core 25 Sq.mm Cable

A11: Supplying and fixing of following size Aluminium letters with approved Coloured powder coated finishing matt for fixing in position cost and conveyance of all materials. a) 30" Emblem Logo

b) 12" Height Aluminium letters (Tamil Letters)

c) 9" Height Aluminium letters (Tamil Letters)

A12: Supplying and fixing of following size 24" x 4" and 5" dia plastic form plate of 3mm thick with 3" height vinyel cutting numbers with approved colours etc., complete and as directed by the departmental officers.

A13: Supplying and delivery of following God - rej nav-tal lock including all cost of lock etc., complete. a) 6 Lever with 2 keys

A14: Supply and delivery, fixing of 0.47mm Galvanium sheet roof of approved quality with necessary J bolts with bitemen and GI washers including cost of Errection, Fasteners, Transportation charges and all other labour charges included.

A15: Supply, Erection and Commissioning of 1No. of 8 Persons Passenger Lift Car Size (1300 x 1100) at site PASSENGER LIFTS (G+3) + Addl. 1 floor, SS 304 Grade with 1m/sec. speed with ARD Higher End - Gearless Lift without Machine Room according to the standard specification.

A16: Supply and run of 2 of No.8 tin coated copper for earth connections to the indidual tenements from the earth bus.

A17: Providing and fixing 25mm x 3mm tin coated copper flat on wall with necessary supports for termination of earth connections in the lift machine room.

A18: Supplying and laying of following GI pipe "B" class with ISI mark. a. 65mm dia GI "B" Class pipe

b. 50mm dia GI "B" Class pipe

A19: Supplying and delivery of following dia GI specials with ISI mark of best approved quality a) 65mm dia GI bend

b) 50mm dia GI bend

A20: Labour charges for conveying and laying of UG cables in the cable trench including earth work and providing sand cushion with brick layers below ground level etc., complete for UG cable of size 4 to 95 Sq.mm and 2, 3, 3 1/2, 4 core with ISI Mark etc., all complete and as directed by the departmental officers.

A21: Labour Charges for conveying and fixing of UG Cable of Size of 4 to 95 Sq.mm and 2, 3, 3 1/2 , 4 core with necessary MS clamps and brass screws including cost of materials and redoing the dismantled portion in to the original position etc., all complete and fixing of UG cables on walls and ceiling etc., all complete and as directed by the departmental officers.

A22: Supply of MS clamps using mild steel flats of suitable for fixing the GI pipe with EB pole with MS flat and required bolt & nuts etc., all complete and as directed by the departmental officers.

A23: Supply & fixing of Crimping lugs suitable for following PVC armoured LTUG cable a) Lugs suitable for 95 Sqmm UG cable

b) Lugs suitable for 50 Sqmm UG cable

A24: Supply & fixing of Cable gland suitable for following PVC armoured LTUG cable etc., all complete. a) Cable gland suitable for 95 Sqmm UG cable

b) Cable gland suitable for 50 Sqmm UG cable

A25: Supplying and fixing of 110mm dia PVC pipe of 4 Kg/cm² with ISI mark including cost of material, conveyance to work site, labour for fixing etc., all complete and as directed by the departmental officers.

A26: Supplying and fixing of suitable MS box (16 gauge) with door enclosure (powder coated) MCB Rotary Distribution board with three numbers 63A phase changing rotary switch + Three numbers rooker indicator, 40A 3 phase ELCB + 8 Nos single pole MCBs etc., all complete and as diected by the departmental officers.

A27: Supply and fabrication of truss work by using MS square tube 50x50x2mm for truss intermediate, horizondal purlins including cost of labour charges for erection, fixing, transportation and one coat of red oxide primer etc., all complete and as diected by the departmental officers.

A28: Supply and fixing of shower arm 9" long approved quality with ISI mark including cost of materials and labour charges for fixing etc. all complete and as directed by the departmental officers.

A29: Supply and fixing of Stainless Steel Health Faucet approved quality with ISI mark including cost of all materials and labour charges etc. all complete and as directed by the departmental officers.

A30: Supply & fixing of Crimping lugs suitable for following PVC armoured LTUG cable a) Lugs suitable for 3.5 core 25 Sqmm UG cable

A31: Supply & fixing of Cable gland suitable for following PVC armoured LTUG cable etc., all complete. a) Cable gland suitable for 3.5 core 25 Sqmm UG cable

A32: Lioson charges for CEIG approved for 8 person lift

A33: Supply & erection of 200 Amps capacity floor mounting metering panel board (cubical type) of size 9'.0' x 5.9' x 1' with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system with 25mm x 6mm tin coated copper flats for phases and neutral.

A34: Supply and erection of 125 Amps capacity floor mounting metering panel board (Cubical type) of size 3.6' x 6.5' x 1' with bus bar chamber (Incoming 3 Nos. 300A cut outs, Bus Capacity: 125 Amps 3 phase 4 wire Copper flats for phases and neutral, Outgoing 2 Nos. metering chamber - each chamber containing 3 Nos. 63 A fuse units)

A35: Supplying & delivery of 3.5 core 95 Sq.mm PVC Aluminium armoured LTUG cable with ISI mark (1100V) earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete in all respects and as directed by the departmental officers.

A36: Supplying & delivery of 3.5 core 50 Sq.mm PVC Aluminium armoured LTUG cable with ISI mark (1100V) earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete in all respects and as directed by the departmental officers.

A37: Supplying and fixing 3 Nos of 300 Amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole EB street pole with necessary clamps including cost of all materials etc., all complete.

A38: Supplying and fixing 3 Nos of 200 Amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole EB street pole with necessary clamps including cost of all materials etc., all complete.

C SIVAKUMAR BROTHERS