8925 REPAIRS TO INTERNAL WIRING AND OTHER CONNECTED WORKS AT MALAD, KANDIVALI, MARVE, KALINA AND TYPE C MD ACCN AT DGQA VIKHROLI COMPLEX UNDER GE NORTH MUMBAI

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down of old DBs with MCB / fuses of any size and rating complete from the position after disconnecting the electrical connection all as specified and as directed.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic PVC casing / capping (not less than 20mm wide) (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

One light / Fan / Exhaust fan / bell point controlled by one, one way switch

One light point controlled by two, two way switches

One 3 pin 5/6 Amps switch socket combination point on independent board

One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

All as per item No. 3.00 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

All as per item No. 3.00 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor with 20mm non metalic PVC conduit concealed in wall / ceiling etc complete

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic PVC conduit 20mm dia (ISI marked) and accessories laid on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

One light / Fan / Exhaust fan / bell point controlled by one, one way switch

One light point controlled by two, two way switches

One 3 pin 5/6 Amps switch socket combination point on independent board

One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

All as per item No. 6.00 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

All as per item No. 6.00 described here - in - before but for 3 pin 20/25 Amps switch socket combination on independent board with 4.0sqmm copper cable and provision of 4.0sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including heavy grade stove enamelled steel conduit 20mm dia (ISI marked) and accessories laid on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

One light / Fan / Exhaust fan / bell point controlled by one, one way switch

One 3 pin 5/6 Amps switch socket combination point on independent board

One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

All as per item No. 9.00 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and fix Switch Piano, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix Switch Piano, flush type, single pole, two way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix Switch bell push, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / L&T

Supply and fix Call bell electric (Ding Dong type) suitable for working on 240 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / L&T

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix switch socket outlet, combination 2 Pin 6Amps / 3 Pin 6Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix switch socket outlet, combination 2 in 1, 3 Pin, 6/16Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix stepped type electronic fan regulator on existing phenolic laminated sheet etc complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix angle holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Fixing only LED tube light fittings 1 x 20Watts, 240 volts, 4 feet with long, decorative ultra slim square profile LED lighting fixture surface and wall mounted with and including three core copper flexible wire 24/0.20mm from ceiling rose to fitting including LED tube rod, fixing accessories such as 2 Nos of PVC round /square block, screw, clips including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Note: LED tube light fittings 1 x 20 Watts, 4 feet long with LED tube will be issued under Schedule 'B' free for fixing only

Fixing only LED light fittings 1 x 13Watts, bulk head luminaries with and including three core copper flexible wire 24/0.20mm from ceiling rose to fitting with fixing accessories including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Note: LED light fittings 1 x 13Watts, bulk head luminaries will be issued under Schedule 'B' free for fixing only

Fixing only LED luminaries 600mm x 600mm, 35/36 watts 240V, AC recessed type with and including three core copper flexible wire 24/0.20mm from ceiling rose to fitting with fixing accessories including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Note: LED luminaries 600mm x 600mm, 35/36 watts will be issued under Schedule 'B' free for fixing only

Fixing only LED light fitting mirror type with high output diffuser 2feet, 10 watts with and including three core copper flexible wire 24/0.20mm from ceiling rose to fitting with fixing accessories including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Note: LED light fitting mirror type 2feet, 10 watts with LED tube will be issued under Schedule 'B' free for fixing only

Fixing only round/square shape 20/15 watt LED ceiling light fittings including lamp complete with all fixing accessories and connected from existing ceiling rose with 3 core flexible copper wire of required length including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Note: Round/square shape 20/15 watt LED ceiling light fittings will be issued under Schedule 'B' free for fixing only

Supply and fix in repairs SPN sheet metal enclosures with two pin and earth plug and socket controlled by MCB SP 20 Amps, 240volts etc complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Legrand / L&T

Supply and fix in repairs double door, sheet metal enclosure powder coated MCB DB SPN 12 way with 100 Amps rated bus bar, 240 volt, horizontal type, IP 42 protection, suitable for fixing MCBs / RCBOs, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs double door, sheet metal enclosure powder coated MCB DB SPN 8 way with 200 Amps rated bus bar, 240 volt, horizontal type, IP 42 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs single door, sheet metal enclosure powder coated MCB DB SPN 4 way with 200 Amps rated bus bar, 240 volt, horizontal type, IP 42 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs double door, sheet metal enclosure powder coated MCB DB TPN 4 way with 200 Amps rated bus bar, 415 volt, horizontal type, IP 53 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs single door, sheet metal enclosure powder coated DB VTPN 4 way with 200 Amps rated bus bar, 415 volt, vertical type, IP 43 protection with provision for DPX 125 MCCB as incomer and SP/TP MCB as outgoing, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs MCCBs 125 Amps, 25 KA, 4 pole with adjustable thermal and magnetic settings complete all as specified and as directed by Engineer-in-Charge. Make : Cat Part No 420055 of Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs MCB TPN, 40 Amps to 100 Amps, 415 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs MCB SPN, 6 Amps to 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs MCB SP, 6 Amps to 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Supply and fix in repairs SPN sheet metal enclosures with two pin and earth plug and socket controlled by MCB SP 16/25 Amps, 240volts etc complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Legrand / L&T / Honeywell

Material and labour for submain wiring complete with and including 2 runs of 6.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm dia including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 6.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 6.0sqmm PVC insulated cable and one run of 6.0sqmm cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 25mm dia including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 4.0sqmm PVC insulated cable and one run of 4.0sqmm cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 4 mm dia, 7.5m long, by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate, and protected by 15 mm bore light grade galvanised iron pipe and connected to control board / panel / equipment complete all as shown in electrical plate No.3 of MES schedule Part I with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavaion and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

Fixing only LED Security light fittings and commissioning 1 x 25 watts, with and including necessary copper wire connection of suitable size, GI bracket made out of 40mm GI pipe light grade, not less than 1.5m long, ISI marked duly fixed with MS clamps of 3mm thick 02 Nos with nuts bolts including taking down existing fittings etc complete all as specified and as directed by Engineer-in-Charge. Note: LED Security light fittings 1 x 25 watts will be issued under Schedule 'B' free for fixing only

Fixing only LED street light fittings 25 watts, outdoor type, AC with and including necessary copper wire connection of suitable size, fixing acessories including taking down existing fittings etc complete all as specified and as directed by Engineer-in-Charge. Note: LED street light fittings 25 watts, outdoor type will be issued under Schedule 'B' free for fixing only

Supply and fix in repairs Modular metal flush box including white cover plate with frame 1/2 module complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs Modular metal flush box including white cover plate with frame 3 module complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs Modular metal flush box including white cover plate with frame 4 module complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs Modular metal flush box including white cover plate with frame 6 module complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs Modular type fan regulator rotary step delux, 240 volt, 50Hz all as specified and as directed by Engineer-in-Charge. Make: Anchor / Leader / L&T / Legrand / Honeywell

Supply and fix in repairs Modular type bell push one module for call bell single pole one way 6 Amps, 240 volt, 50Hz all as specified and as directed by Engineer-in-Charge. Make: Anchor / Leader / L&T / Legrand / Honeywell

Supply and fix in repairs Modular type switch socket outlet combination 2 in 1, 3 Pin, 6/16Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix in repairs Modular type switch socket outlet combination 2 in 1, 3 Pin, 6Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix in repairs Modular type switch single pole one way 6Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Fixing only LED bulb 10Watt retrifit type to fit in lamp holder all as specified and as directed by Engineer-in-Charge. Note: LED bulb 10Watt will be issued under Schedule 'B' free for fixing only

Supply and fix meter box in replacement with new meter box for housing meter and MCB DB's, MCCB, made out of 2mm thick CRCA sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer of size 0.60m x 0.60m x 0.20m grouted in wall and refixing of existing meters and MCB's including front door with hinges and locking arrangements and slot for meter reading duly covered with 3 mm thick sheet glass of size 100x 100 mm and mouting on wall with proper fixing arrangement with wooden planks for mounting meter and MCBs complete including taking down of old rusted meter box and making good the surface as required all as specified and as directed by Engineer-in-Charge

EVEREST POWER CONTROL ENGINEERS

Chaudhary Enterprises