SPL REPAIR TO BLDG NO P86 ORs MD ACCN OF ZONAL WKSP AND SPECIAL REPAIR OF OLD VINTAGE CEILING FAN WITH BEE 5 STAR RATED CEILING FANS AT STN HQ KANDRORI AREA UNDER GE SOUTH PATHANKOT

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified.

Taking down shutters of any description exc 1Sqm but n exc 2Sqm each.

S&F pressed steel frames for door made out of MS Sheet 1.25mm thick of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc all as specified and directed.

S&F pressed steel frames for door made out of MS Sheet 1.25mm thick of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc all as specified and directed.

S&F 35mm thick plain framed panelled door shutters of 2nd class hard wood (Factory made) two panel with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secring glass,etc size of members of shuters as specified in SSR Part-I,Section 8, clause 8.24 (a) all as specified.

S & F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor over all length of cover plate 140mm thick complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube. All as specified .

S&F factory made solid PVC door shutter, 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2mm moulded prelam PVC sheet on on the front face and 2mm plain colour PVC sheet on back face with wood free EPS all aws specified.

S&F 100mm Hasp and staple, safety type, aluminum anodised including bolt to hinge plate and fixed with screws complete

S&F in repairs 100mm size, extruded aluminium alloy handles, fabricated type, anodised.

S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodised.

S&F 150mm size, extruded aluminium alloy handles, fabricated type, anodised.

S&F 150mm long aluminium tower bolts (ISI Marked) extruded type all as specified.

S&F in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.

S&F 300mm long Mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate

S&F steel window/ventilator with tubular frame factory made double shutters of size 79mmx39mm,16 guage rectangular tubular frame with side hung shutter glazed and guaged with glazing bars 12x3mm flat iron including necessary locking arrangment and hook and eye complete, incl two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. (wire guage and glass shall be measured and paid seperately)

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples/wodden bedding

S&F in repair Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for Preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint all as specified.

M&L for Two coats of synthetic enamel paint on new wooden surfaces including preparation of surface and one coat of pink primer all as specified.

M&L for preparation of old painted steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles,

M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6)

M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built incm (1:6)

M&L Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces

Taking down cement plaster on brick or concrete surface and description including raking out joints hacking for key scrubbing down with water, M&L Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement as in ceiling and applying two coats of white wash complete all as specified.

Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water, M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement mixed with and including water proofing compound including two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface and curing after applying each coat complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for keys scrubbing down with water, M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick in CM 1:6 complete all as specified and directed.

Dismantling of wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L Glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L Vitrified Ceramic light shade tiles 9 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over screed bed 15 mm thick in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Taking up or down GI pipes 15mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, S&F GI tube 15mm bore medium grade galvanised ISI marked with all fittings complete on walls complete all as specified and directed.

Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, S&F GI tube 20mm bore medium grade galvanised with all fittings and fixed to short length complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick masonry, complete all as specified.

M&L PCC 1:5:10, type E-2, (using 40mm graded crushed stone aggregate) in foundation filling/sunken floor and mass concrete, all as specified.

S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand.

S&F in repair vitreous china wash down water closet pan (Orissa patern) white with integral foot rest of of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.

S&F for SS Tubular towel rail of chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete.

S&F in repairs low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washer,waste pipe and waste coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overallsize 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repairs concealed type 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F grating round 100 mm size of stain less steel as in repair, complete all as specified and directed.

S&F in repair chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

Dismantling water tanks (Capacity of tank exc 250 Ltr but n exc 500 Ltr) and removing from site, S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20/15mm dia GI pipes medium grade respectively 20/15mm GI pipe medium grade over flow pipe 15cm long and 20mm high pressure with polyethelyne float valve and fly/check nuts complete all as specified.

M&L in repairs 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement type B-1 1: 2:4 and making good wall or floor tiling to match existing surface.

M&L 75mm CI Bends (any radius), with ovel acess door diminishing pieces or tapers (larger bore measured)

M&L 75mm CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

S&F 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall

All as per Srl item No 56 above but for 75mm size

M&L 100mm CI Bends (any radius), with ovel acess door diminishing pieces or tapers (larger bore measured)

Taking down eaves gutters and rainwater pipes (any size or pattern),CI pipe including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F mild steel curtain rods 25mm dia pre-laminated synthetic enamel paints of wooden finish fixed all as directed and as approved by Engr in Charge.

Supply and fxing wooden (turned, weathered & mitred) brackets pre polished with french polish with cut hole suitable for 25 mm dia rod fixed with screws and gutties in wall, including end caps with wall ornament and fixed to curtain rod with screws of design/shape complete all as specified and directed.

M&L for Stone slabs and tiles of any description or thickness in floors, aprons etc Laid,bedded and pointed in any mortar

M&L for 18- 20 mm thick Granite ( table rubbed and polished) of any type work on cooking platform and like in cement mortar(1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite.

M&L Granite 18-20mm thick machine cut, bedded and jointed with grey cement slurryand pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for corner selves

M & L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works; not exceeding 200 mm thick

M&L for one coat of white wash on ceiling incl preparation of old plastered surfaces complete all as specified and directed.

M&L for two coat of white wash on wall incl preparation of old plastered surfaces complete all as specified and directed.

Complete removal of existing treatment from internal surfaces of walls by wire brushing and washing, rubbing down and stopping of surfaces , applying 1mm wall care putty on walls and make the surface of level, clean and repair disturbed edgs of bricks/concrete walls finish to even and smooth and applying two coat of oil bound distemper over a coat of primer all as spd and directed by Engr-in-Charge.

Hacking out old brocken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, gazed with putty or fixed with beads.

S&F 3mm thick frosted or obsecured sheet glass ordinary quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane all as specified.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness. ( below or above ground level) all as specified.

M&L 75mm thick plain cement concret type C-2 1:3:6 (using 40mm graded crushed stone aggregate) as in flooring/Sub base/Plinth protection all as spd and directed.

M&L for TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending, spirally for hooping columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

S&F in repair SS chromium plated, plated peg set of four fixed with screw complete all as specified and directed.

M&L for Roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc with and including taking out existing roof treatments, brushing neat cement slurry with 3.0 Kg of cement per Sqm and providing 10mm thick rendering in cement mortar 1:4 on fair faces of concrete, finished even and fair mixed with and including water proofing compound to receive treatment on roof Providing and laying of water proofing treatment of roof APP (Atactic polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, with non woven polyester mat reinforcement of 160gsm, weight of membrane @3.6 Kg/Sqm over a solvent based bitumen primer, @0.30 Ltr/Sqm by same manufacturer conforming to IS: 3384-1986. The membrane shall be laid using bitmun torch. The end lap should be 100mm and the side lap must be minimum 75mm. The membrane shall be first laid up to the parapet wall junction and then shall be overlaped with another memberane (flashing) with an overlap covering upto a distance of 300mm. In case parapet height is less than upto 500mm, membrane shall be terminated at the top of parapet. All rain water pipes opening shall be suitable sealed with APP membrane all as specified and directed by Engineer-in-charge. (The rate uncludes for fillling of crackes in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster all as directed by Engr-in-Charge

M&L for preparation of old painted steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

PCC padding in roof slabs/chhajjas in PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate with and incl integral water proofing compound @ 3% weight of cement and providing necessary slope towards outside.

M&L cement concrete Type B1 1:2:4 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for 20mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed in repairs

Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc. Removing old/UNSV material from site and making good the old disturbed surface.

M&L for point wiring with PVC insulated fire retardant stranded copper conductor cable of 1.5 sqmm in PVC concealed conduit heavy duty and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and drawing 1.5 sqmm PVC insulated fire retardant stranded copper conductor cable as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and directed by Engr-in-Charge (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note In ceiling Portion surface conduit wiring shall be carried out.

One light point or one fan point or bell point controlled by one switch SP one way 230 Volts.

One light point controlled by Two-2 way switches with cable 1.5 Sqmm size,

One 3 pin socket out let 5/6 Amps on same board.

One socket out let 5/6 Amps on Independent board.

All as per srl item No 82.03 above but for 15/16 Amps socket out let independent with 4.0 sqmm copper conductor.

M&L for switch Piano flush type single pole one way 5/6 Amp

M&L for switch,socket combination 2 in 1 , 3 pin, 5 and 15 Amp flush type all as specified and directed.

M&L for switch Piano flush type single pole Two way 5/6 Amps

M&L for switch,socket combination 3 pin, 5 Amp flush type all as specified and directed.

M& L for bell push flush type 5/6 amp all as specified.

Supply and fix Buzzer Ding Dong, AC 230 volt single pole

M&L for socket outlet 2 in 1, 3 pin, 5 Amp flush type all as specified and directed.

S&F fan regulator electronic type with hum free snubber circuit with 4/5 steps 240 volts complete all as directed

M&L for ceiling rose 2-3 terminal size 65x20mm all as specified and directed.

S&F lamp holder Angle type insulated body with back plate for batten fitting, fixing with proper round block.

S&F in replacement sheet metal enclosure with DB's ( grouted in walls) double door type for MCB's 08 ways with 200 Amps 240 volts rated bus bar all as specified.

S & F in replacement existing unsv distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 pole 415 Volts 100 Amps rating with rupturing cap 25 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge.

M&L 6 to 32 Amps MCB SP ( ISI Marked) 50 C/S 10 KA 'C' sereis complete all as specified.

S&F MCB 6 to 32 Amp SPN 50 C/S 10 KA 'C' sereis complete all as specified all as directed

Supply and Fix in replacement inverter type LED fitting 1x20W LED including LED tube 4 feet long having bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.

Supply and Fix in replacement existing UNSV decorative box type fitting 4 feet long with LED tube light fitting 20 watt complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.

Supply and fix bldg security light fittings with LED security light fittings 35 watt, IP 65 having pressure die cast aluminium alloy housing, prismatic polycarbonate cover complete including making connection with 3 core copper flexible cable of suitable size including galvanised iron pipe bracket 0.90 mtr long of 25 mm dia and fixing with bldg for fixing of street light fitting all as directed.

Supply and fixing in replacement existing unsv integrated LED bulk head light fitting 1X10 watts IP-65 protection connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.

Supply and Fix in replacement existing unsv sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.

S&F inverter type LED Lamp 9 watt 230 volts complete all as specififed and directed.

S&F LED Lamp 12 watt 230 volts complete all as specififed and direccted.

S&F sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

S&F ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering steel body with complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and as directed.

M&L for Sub main wiring in PVC concealed conduit with 2 Nos single core PVC insulated copper conductor cable FRLS size 4 sqmm multistrand in concealed conduit with 4 sqmm PVC insulated FRLS as earth continuity wire using suitable size of copper thimble including provn of PVC coduit heavy duty ISI marked of adequate size.

M&L for Sub main wiring in PVC concealed conduit with 2 Nos single core PVC insulated copper conductor cable FRLS size 6 sqmm multistrand in concealed conduit with 6 sqmm PVC insulated FRLS as earth continuity wire using suitable size of copper thimble including provn of PVC coduit heavy duty ISI marked of adequate size.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical, plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 25 Sq mm 4 core.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. (cable shall be laid 60 cm below ground level )

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .

Material and labour for old size brick well burnt, laid flat ,for cable protection complete all as specified and directed.

M & L GI Pipe light grade 40 mm bore for cable protection as a guard pipe complete.

Cutting existing steel tubing for alternations or additions and screwing existing steel tubing for alternations or addtions or lengthening screwd on pipe to from connector up to 50 mm bore

Supplying & Laying 50 mm bore GI pipe medium grade in trenches indluding all fittings as directed.

All as per Item No. 120 above but for 40 mm bore

Supplying & Laying 20 mm bore GI pipe medium grade laid on walls/ceiling/on roof indluding all fittings as directed.

S&F for 50 mm bore gun metal gate valves with iron wheel head, screwed both ends for iron pipe ISI marked as per IS 778

All as per Item No. 123 above but for 20 mm bore size

M&L for construction of masonry valve chamber of size 750x750x1050mm complete including demolition and removing of debris of the existing chamber all as specified and as directed.

S&F for 1200 mm Sweep metallic body Ceiling Fan against BER, Energy Saving, BLDC (BEE 5 star rated) Motor without romote complete with canopy, blades, down rod, split pin etc complete of approx wattage 30 to 32 Watt rated suitable for operation on AC 220-240 V AC, 330 RPM, 50 HZ, PF >0.95, Air delivery approx 225 cum/min of white colour.

S&F for 1400 mm Sweep metallic body Ceiling Fan against BER, Energy Saving, BLDC (BEE 5 Star rated) Motor without romote complete with canopy, blades, down rod, split pin etc complete of approx wattage 30 to 32 Watt rated suitable for operation on AC 220-240 V AC, 300 RPM, 50 HZ, PF >0.95, Air delivery approx 260 cum/min of white colour.

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

VIJAY CONSTRUCTION CO

M/S BISHAN DASS AND SONS

VIKRAM SINGH MANHAS

SATISH AND CO

VISHNU DUTT AGANIHOTRI & SONS

Balaji Engineers