| 1 | | Providing and fixing customised Wall cladding work with wooden decorative Panel- Wall paneling . 12 mm thick plywood to be applied with required frame structure,design along with proper lining & labelling.all complete in laminate finish. Panels made of laminate, strands, particles or fibers and bonded with a synthetic or other adhesive cured using heat and pressure. The properties of the panel product are a result of the character of the wood raw material, the adhesive, additives etc.Planks and panels in thickness, with sizes being 1/2 inch and 3/4 inch. panels are thinner at roughly 1/4 inch.Coating of paint Finish to be applied wherever required etc. | 192 | SQFT | chsadmin | 20 |
| 2 | Renovation work of DG cabin | Providing and fixing of customised single layer partition work Wooden Partition of varying lengths shapes bends curves in hall cabin area constructed out of 1 no multiply 19 mm hardwood frame work grid at inner supports lesser spacing screwed firmly to the RCC slab beam floor wall other partition or furniture unit etc. with necessary slots for passage of electrical conduits cables and covered with 8mm thick Plywood MR grade finished with 0.8 mm thick Laminate with 12 mm toughened clear glass with acid wash film in part areas in place by half inch BTC lipping in melamine polish from inner side including fixing & sealing of wooden partition with all complete as per site requirement. | 203 | SQFT | chsadmin | 20 |
| 3 | Renovation work of DG cabin 1 st floor New Custom House | Existing partition dismantling carefully demolishing the plywood panels frames false ceiling flooring taking the debris filling up in sacks and throwing out the debris out of site. | 1 | JOB | chsadmin | 20 |
| 4 | | Existing electrical Main panel covering with customised decortive storage type with openable louver door. Fixing the plywood frames for concealing the cables etc. fixing the louver doors with hardware material such as hinges, handles etc. Scraping the frame with help of sand paper for smoothing and Applying 1coat of paint. Filling the gaps, cracks & holes with wax. Again scraping with sand paper and preparing the surface and applying two to three coats of superior quality paint. | 1 | NO | chsadmin | 20 |
| 5 | | Pdg and installation of customised decorative running cantilever suspended apex.They are very easy to install wood usually consist of wood panels which are then joined together with standard commercial apex systems T-15 and T-24 profiles. Marking out the desired height of your apex design from the floor along the walls and add wooden struts to support the structure. Then installing the wooden panels and using choice of paints and finishes to complete the look.as it provides protection the room from cold and overheating it is environmentally safe and durable. | 214 | SQFT | chsadmin | 20 |
| 6 | Renovation work of DG cabin 1 st floor New Custom House | Luster Painting work Sand papering cleaning the surface to smooth texture filling the holes and cracks with putty and sanding them until they re smooth. applying primer and other sealers with lambipatti using necessary tools to full surface in layers thereafter applying coats of paint finished in approved shade and colour. Roller to be applied on all surface surface etc. | 1,246 | SQFT | chsadmin | 20 |
| 7 | Renovation work of DG cabin 1 st floor New Custom House | Zinc painting Zinc rich paints contain a high level (85percentageto92percentage) of zinc metal pigments which function as an active anticorrosion component. This paint creates a metallic zinc film that acts as a physical barrier as well as providing cathodic protection for the underlying surfaces. appylying coats of paint to the surface surface. | 514 | SQFT | chsadmin | 20 |
| 8 | Renovation work of DG cabin 1 st floor New Custom House | P/F of AC power point 5/15 amp with circuit breaker including modular switches, socket, internal box with face plate . 4 sqmmpolycab make wire with PVC conduit of precission make pipe. 1.5 sq mm green earthing wire in the PVC conduit.all complete as per requirement. | 2 | PTS | chsadmin | 20 |
| 9 | Renovation work of DG cabin 1 st floor New Custom House | Providing and fixing of customised decorative wall niche with spot and strip lights. Niche a shallow recess or alcove in a wall, used for display or storage. Made out of plywood structure built to the wall as per sizes in standing position. Fixing spot lights to the top of the niche for elegant look. Fixing strip running light with required material etc. | 48 | SQFT | chsadmin | 20 |
| 10 | Renovation work of DG cabin 1 st floor New Custom House | Pdg and Fixing of electrical power / light point 5/15 AMP circuit of 2x2.5sqmm including modular switches, socket, internal box with face plate 1.5 SQMM wire green earthing wire in the PVC conduit .all complete with electrical wiring work as per requirement . Existing worn out wiring laying properly and worn out wires covering with cassing patti. Testing , commissioning and using the earthing wires1.5 sq mm green earthing wire in the PVC conduit. Re-shifting the all worn out wires and aligning the same in proper way. all complete as per quirement.(Without lights and fans) | 1 | JOB | chsadmin | 20 |
