Construction of 10.5 meter wide link taxi track connecting Old apron to the proposed FTO at Hubballi Airport. SH Provision of Power supply arrangements for FTO and Diversion of Existing power cables from proposed FTO Location.

Amount

SH-1: CABLES AND CABLING Supplying of following sizes aluminium conductor armoured XLPE insulated, PVC sheathed power cable for working voltage upto & i/c 1.1 KV. as per IS : 7098 (Part-I), 1988 with latest amendments.

3.5 C x300 Sqmm

3.5 Cx185 sqmm

3.5 C x 240 sq.mm

3.5 Cx 120 Sqmm

Supplying and laying of 90 mm dia PE 63 grade PN4 rating HDPE pipe confirming to IS 4984 incluiding all accessories direct in ground (75 cm below ground level) excavation and refilling the trench complete as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/STONE WARE/METAL/HDPE pipe as required.

a) Above 95 sq. mm and upto 185 sq. mm

b) Above 185 sq. mm and upto 400 sq. mm

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of Pvc insulated and PVc sheathed / XLPE aluminium conductor cable of 1.1 KV Grade as required.

3.5 C x300 Sqmm

3.5 C x 185 sq.mm

4 Cx 120 Sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 C x300 Sqmm

3.5 C x240 Sqmm

3.5 C x 185 sq.mm

3.5 C x120 Sqmm

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

Providing, laying and fixing of 300 mm dia RCC Socket Spun type Hume pipe NP-2 class, in ground, in existing trench complete as required as per site requirement.

Construction of brick masonry chamber in cement mortar 1:6 ( 1 cement : 6 coarse sand ) with foundation concrete 1:5:10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:6 (1 cement : 6 coarse sand) finished with a floating coat of neat cement complete as per site requirement. (chamber size 1500mm x 1500mm and 1500mm and deep With common burnt clay F.P.S. non-modular brick)

Supply and fixing of chequered plate of 5 mm thick including cutting to required size using gas cutter and lay the same over the chamber, fixing of nosing angle and supporting handle for chequered plate, related civil works, finishing etc. and painting with two coats of enamel paint over one coat of Zinchromate primer complete as required as per site requirement.

Dismantling of existing 6mtr height perimeter light poles i/c disconnection of all connections,cables,termination box's and light fittings from the poles and handed over to AAI store complete as required as per site requirement.

Installation, testing and commissioning of existing 6mtr height perimeter light poles including foundation, all connections, terminations, fixing of loop in and loop out box's and light fittings complete as required asper site requirement.

Manish Electricals

DOSHI ELECTRIC ENGG. CO.