RE-ALIGNMENT OF DV&ALLIED STRUCTURE-PAHARPUR LPG

DELUGE VALVE SYSTEM — PART NAME:DELUGE VALVE SYSTEM; PART MATERIAL:N/A; PART DIMENSION:150 MM; PART RATING:N/A; PART NUMBER:N/A; ITEM POSITION NUMBER:N/A; MANUFACTURER:N/A; EQUIPMENT NAME:FIRE FIGHTING; AN AUTOMATIC WATER CONTROL VALVE SHALL CONSIST OF FOLLOWING: 1. DELUGE VALVE UNIT 2. DIAPHRAGM UNIT 3. INTEGRAL TEST AND DRAIN VALVE MANIFOLD 4. ALARM SYSTEM 5. PRIMING EQUIPMENT 6. INSTALLATION STOPS VALVE WITH PRESSURE GAUGE AND OUTLET VALVE. 7. BY PASS BALL VALVE. 8. DETECTOR PIPE WORK MANIFOLD. UL LISTED, FLANGED AND WITH ACCESSORIES (EXT BYPASS CHECK VALVE, ALARM DEVICE, AIR FILTER REGULATOR, LOCAL OPERATION AND WITH INSTRUMENTS)

DISMANTLING OF RCC — DISMANTLING OF RCC ENCOUNTERED DURING CARBON STEEL PIPELINE LAYING IN UNDER GROUND CONDITION.

6IN SEAMLESS PIPE — SIZE- 6 INCH, THK/SCH- STD, ASTM A333 GR.6, ASME B-36.10, BE SEAMLESS

CONVEYOR,BEND W/O CHAIN — CONVEYOR; TYPE:BEND W/O CHAIN; MATERIAL:GALVANIZED IRON; ANGLE:45 DEG; SIZE:60 X 30 X 30 MM; WITH ALL ACCESSORIES WITHOUT CHAIN; SPECIFICATIONS: SUPPLY OF CONVEYOR SECTION CHAIN CONVEYOR FRAME SIDE FRAME:ISA 65 TRACK (CHANNEL) MATERIAL:MS TO IS:226 THICKNESS OF CHANNEL:6 MM. CONVEYOR CHANNEL:60X30X30 MM CONVEYOR LEG SUPPORT:ISA 65, 6 MM NOTE:THAT CONVEYOR FRAMING SHALL BE FABRICATED FROM HOT DIPPED G.I. STEEL SECTIONS. THE CONVEYOR FRAMING SHALL BE PROVIDED WITH GUIDES OF SUITABLE HEIGHT TO GUIDE THE LPG CYLINDERS HANDLED. CONVEYOR RAILING SIDE RAILING:ISA 50 X 50 X 6 MM WITH 6 MM THICK PE STRIP ON THE INNER FACES. RAILING SUPPORTS:ISMC 75 AT 1.5 M C/C. (REFER NOTE BELOW) ADDITIONAL EXTRA SUPPORTS AT BENDS. WEAR PLATE MATERIAL:UHMW-PE (ULTRA HIGH MOL. WT- POLY ETHYLENE) THICKNESS:10 MM FOR CHAIN BOTTOM; 6 MM FOR RAILING INNER FACES MAKE:POLYHISOLIDUR PLASTICS (I) LTD./KAVERI POLYMERS/KHANNA BROS/HPCL APPROVED EQUIVALENT NOTE: ONLY HIGH TENSION NUT, BOLT & WASHERS TO BE USED FOR FABRICATION AND RUBBER GASKET AND WATER PROOFING MATERIALS TO BE FITTED BETWEEN CONVEYOR FLANGE JOINTS. CONVEYOR SHALL BE POWDER COATED WITH GOLDEN YELLOW SHADE NO. 356 OF IS 5. THIS SECTION SHALL BE FITTED WITH THE SIDE RAILING OF ISA5050 (6 MM THICK) AND FITTED WITH UHMW-PE WEARING STRIP ON IT. THE HEIGHT OF THE SIDE RAILING SUPPORT SHALL BE 285 MM.

INSTLN OF BEND GI,ABV 90 — INSTALLATION OF GALVANIZED STEEL BEND, ABOVE 90 DEG; SUPPLIED BENDS IN DESIGNATED LOCATION. ALL MANPOWER TOOLS/TACKLES ACCESSORIES INCLUDED IN RATE.

6X150# BLIND FLANGE — GALVANISED, PIPE FITTING, BLIND FLANGE,SIZE: 6 INCHRATING/CLASS: 150 PSIEND CONNECTIONS: SOCKET WELD AND FLAT FACEMOC: ASTM A105 (GALV)DIMENSIONAL STANDARD: B - 16.5ALL OTHER TESTING REQUIREMENTS AS PER THE ATTACHED HPCL QAP S-3G/H AND S-3W ONLY.

SUP & LAY - 50MM PLFIRE — SUPPLY, LAYING AND TESTING OF FIRE HYDRANT PIPELINE 50 MM DIAMETER OF HPCL APPROVED MAKE HEAVY QUALITY (CLASS C) MILD STEEL PIPES CONFIRMING TO IS 1239. JOB INCLUDES FABRICATION, WELDING AND PLACING ON THE PEDESTALS WITH GALVANIZED IRON `U? CLAMPS, INCLUDING WELDING OF PIPES, FLANGES, BENDS, REDUCERS, PIPELINE FITTINGS, COLLARS IF REQUIRED, CONNECTION PLATES ETC., INCLUDES SUPPLY OF ALL TOOLS, TACKLES, MACHINERY, EQUIPMENT, INSTRUMENTS, MANPOWER ETC., FOR COMPLETION OF THE JOB. JOB TO BE COMPLETED IN ALL RESPECT AS PER STANDARD SPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE. THE JOB ALSO INCLUDES SUPPLY AND FABRICATION OF ANY BENDS, TEES ECCENTRIC OR CONCENTRIC REDUCERS AS PER THE DIRECTIONS OF THE ENGINEER-IN-CHARGE. LENGTH OF ALL PIPELINES SHALL BE MEASURED UP TO THE NECK OF THE FLANGE ONLY. SUPPLYING, FIXING AND WELDING OF NECESSARY FLANGES, BENDS ALONG WITH SUPPLYING AND FIXING OF 3 MM THICK CHAMPION/APPROVED MAKE CAF GASKET (OF APPROVED RATING), NUTS AND BOLTS AS PER DIRECTIONS OF THE ENGINEER-IN- CHARGE. JOB INCLUDES SUPPLY, FABRICATION, WELDING OF NECESSARY HALF COUPLINGS OF 15 NB TO MS PIPE FOR FIXING SPRINKLER NOZZLES AT AN DISTANCE OF EVERY 2 METRE INTERVAL. JOB INCLUDES FIXING OF SPRINKLER NOZZLES IN THE HALF COUPLING. JOB INCLUDES SUPPLY AND PAINTING THE EXPOSED FIRE HYDRANT PIPES WITH TWO COATS OF PRIMER AND TWO COATS OF ENAMEL PAINT (FIRE RED) OF APPROVED COLOR AS PER INSTRUCTIONS FROM ENGINEER-IN-CHARGE.

ERW FIRE HYDRANT PIPELINE 2657-PAHARPUR LPG PLANT — SUPPLY OF 12INCH ERW PIPES CONFORMING TO IS 3589

6 IN ELBOW 6MM THICKNESS — SUPPLY AND INSTALLATION OF ELBOW (6INCH ELBOW, 90 DEGREE, ASTM A234 GR. WPB, ASME-B 16.9)

SPLY AND INSTLN OF ELBOW — SUPPLY AND INSTALLATION 2 INCH ELBOW 45 DEGREE STAINLESS STEEL; SUPPLY AND INSTALLATION OF 2 INCH 45 DEGREE ELBOW AS PER DIRECTION OF EIC. SPECS AS FOLLOWS-SCHEDULE THICKNESS-M, DMN STANDARD-B16.9, MATERIAL ASTM A403 GRADE WP-304S BUTTWELD, 1.5D.