C/o Toilet Block in MC Park Ward No. 6 MC Mehatpur Basdehra Una HP

Amount

Excavation in foundation trenches etc. ,in earth work , lift up to 1.50 mtrs. ,stacking the excavated soil not more than 3.00 mtrs. clear from the edge of excavation and then returning the stacked soil in 15cm layers, when required into the plinth and sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 mtrs. (P.J. Work)

P/L c. conc. 1 : 4 : 8 (1 cement : sand :8 Graded stone aggregate of 40 mm nominal size) and curing complete.

Brick work using common burnt clay building bricks in cement mortar 1:6 ( 1 cement : 6 sand ) in plinth and foundation .2nd class bricks

Brick work using common burnt clay building bricks in cement mortar 1:6 ( 1 cement : 6 sand ) in super structure . 2nd class bricks

Half brick masonry in common burnt claybuilding bricks in cement mortar 1;4 ( cement : 4 sand ) using first class bricks )

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30 angle iron in frame 30 x 30x5 mm so as to give a fair finish in/c centering , shuttering ,strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4.00 mtrs.and removal of the same for instu reinforced concrete and plain concrete work in :- Foundations,footings,basis of columns etc. and mass concrete.

Columns, pillars, posts and struts square or rectangular or polygonal in plan.

Beams, cantilevers, girders and lintels.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc. up to 200 mm in thickness

Edges of slab/breaks in floors

P/L C.CONC. 1:1.5:3:( 1cement : 1.5 sand :3 Graded stone aggregate of 40 mm nominal size) and curing complete excluding the cost of reinforcement . Foundations, footings, basis of columns etc. and mass concrete.

Beams, cantilevers, girders lintel and flat surfaces such as soffits of suspended floors, roofs ,landings and the like. Floors etc. up to 200 mm in thickness.

Columns,pillars, posts and struts square or rectangular or polygonal in plan.

Providing tor steel reinforcement for RCC work in/c bending ,binding and placing in position properly.

15 mm thick cement plaster in single coat on rough / fair side of brick walls for interior plastering upto floor two level including arrises ,internal rounded angles ,chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 (1cement : 4 sand )

6 mm thick cement plaster to ceing in cement mortar 1:4 ( 1 cement : 4 sand )

White glazed tiles 6 mm thick in skirting ,risers of steps and dado on 12 mm thick cement mortar 1:2 ( 1 cement :2 sand ) and jointed with cement slurry.

P/F Pressed steel door and window frames manufactured from commercial mild steel sheet of1.25 mm thickness in/c. hinges jamb lock,jamb beed and if required angle threshold of mild steel angle of section 50 x25 mm or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split and tails to each jamb in/c. steel butt hinges 2.5 mm thick with guards strike plate andshock absorber as specified andapplying a coat ofapproved steel primer after pre treatment of the surface as directed by Engineer–in-charge.(PROFILE –B)

P/F paneled glazed or paneled and glazed shutters for doors windows and clerestory windows in/c black ornamental butt hinges with necessary screws.2nd class Deodar wood. 40 mm thick

P /L Duro stone vetrified tiles ( 300x300x8 mm ) in grey/coloured or of approved shade in skirting ,risers of steps and dado laid on a bed of 12 mm thick cement mortar 1: 3 ( 1 cement : 3 sand ) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete

P /L Duro stone vetrified tiles ( 300x300x10 mm ) in grey/coloured or of approved shade in flooring ,treads of steps and landing laid on a bed of 12 mm thick cement mortar 1: 3 ( 1 cement : 3 sand ) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete

P/L granite stone 20.00 mm ( average ) thickness base of cement mortar 1:3 (1 cement : 3 sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone in/c rubbing polishing complete . 20 mm thick.

Birla white putty wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops ,dust loose materials and other foreign matter, sand papered smooth to give final matter finish to surface complete.

Wall painting (two coats ) with plastic emulsion paint of approved brand and manufacture on un decorated wall surfaces to give an even shade in/c thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth in/c applying of putty as required for making the surface .

P/L vitreous china wash down water closet ( European type W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1 cement : 1 sand ) ( seat and cover to be measured and paid for separately )Anglo Indian Universal closet.

P/L vitreous china wash down water closet ( Indian type W.C .pan ) size 580 mm ( earth work ,bed concrete, foot rest and trap to be measured and paid for separately )Orissa pattern.

P/F PVC P or S trap. 110 mm dia

P/L PTMT coloured /white high density polyethylene /poly propylene 10.00 litres capacity (full flush ) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve siphon 15 mm nominal size PVC ball valve with polythene float with flush button couplings for connections with inlet , outlet and over flow pipe 40 mm dia C.P flush bend in/c cutting holes in walls and making good the same connecting the flush bend with cistern and closet ( over flow pipe to be measured and paid for separately.)

P/F f vitreous china wash basin with single hole for pillar tap with C. L or M. S. brackets painted white in/c cutting holes and making good the same but excluding fittings (560x 400 mm ( oval type under counter )

P/ F vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings

P/F C.P. Brass waste for wash basin or sink.32 mm dia

P/F PVC floor trap ISI marked of self cleaning design in/c fixing with approved adhesive ,cost of cutting making good the wall and floors etc.complete. 110 mmx 90 mm

P/F high pressure PVC spigot and socket waste and ventilating pipes ISI marked in/c fixing with approved adhesive etc. complete. 110 mm dia

75 mm dia

P/F PVC collars ISI marked in/c fixing with approved adhesives etc.complete.110 mm dia.

P/F PVC plain bend ISI marked in/c fixing with approved adhesives etc.complete.110 mm dia.

Providing and fixing to wall ,ceiling and floor galvanized mild steel tubes ( medium grade ) ,tube fitting and clamps in/c making good the wall , ceiling floor . 15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Making connection of galvanized steel distribution branch with galvanized mild steel main 20 mm to 40 nominal bore by providing and fixing tee in/c cutting and threading the pipes complete

P/F PVC water storage tank of ISI 12701 marked GI inlet and outlet connection 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement in/c hoisting up to all heights above ground level . 1000 litres net capacity tank.

P/F C.P. brass bib tap with capstan head . 15 mm dia.

P/F C.P.brass pillar tap with capstan head. 15 mm dia.

P/F C.P brass angle valve .15 mm without nuts and pipe.

P/F chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P brass screws .

P/F PVC connection 450 mm long

P/F one piece construction white vitreous China squatting plate urinal with an integral longitudinal flushing pipe 100 mm dia half round channel automatic C.I flushing cistern with fittings R.S or C.I brackets of standard size. G.I flush pipe for back and front flush with standard spreader pipes with fittings G.I clamps white vitreous tiling200 mm high to front and side walls with white vitreous corners and angles set in neat cement standard urinal C.I trap 85 mm diameter with vent arm and outlet grating and coupling in C.P brass complete in/c.painting the cistern and fittings,cutting and making good the walls and floors etc. where required.( Range of two squatting plates with 10 litres C. I Automatic flushing cistern.

P/F on wall face C.I rain water pipes in/c filling the joints with spun yarn and cement mortar 1:2 (1 cement : 2 sand ). 100 mm dia pipe .

P/F m .s holder bat clamps of approved design to C. I or S.C. I pipes embedded in and in/c cement concrete blocks 10x10x10 cm of 1;2:4 ( 1 cement :2 sand :4 graded stone aggregate of 20 mm nominal size ) and cost of cutting holes and making good the wall etc. ( a) 100 mm dia for C.I pipe .

P/L on wall face C.I accessories for rain water pipes in/c filling the joints with spun yarn socked to neat slurry and cement mortar 1 :2 ( 1 cement : 2 sand ). 100 mm dia.

Applying priming coat on external surface of new rain water,soil waste and fittings with ready mixed priming paint brushing red lead in/c c preparing the surface by thoroughly cleaning of grease ,dirt and other foreign matter and scoured with wire brushes,fine steel wool scrappers and sand paper complete. 100 mm dia .

Painting three coats ( excluding priming coat ) on external surface of rain water , soil waste ,vent pipes and fittings with ready mixed bituminous paint brushing black anticorrosive to give an even shade in/c. cleaning of all dirt , dust and other foreign matter. 100 mm dia.

P/F 800 mmX450 mm beveled edge mirror of superior glass mounted on 6mm thick A. C sheet or plywood sheet and fixed to wooden plugs with C.P brass screws and washers.

SUMIT KUMAR