Construction of computer centre at DBRAIT campus, Dolly Gunj under CDI, APWD, Port Blair. SW- Repair and renovation works in the TyII qtrs at DBRAIT campus

Amount

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia. Pipes.

25 mm nominal outer dia .Pipes.

Providing and fixing brass bib cock of approved quality :

15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

100 mm diametre

Providing and fixing C. P. brass towel rail with necessary screws of approved quality as per th direction of EIC.

600 mm long towel rail

Providing and fixing C. P brass soap Dish Holder of approved quality as per the direction of EIC.

Providing and fixing CPVC ball valve of approved quality :

20 mm nominal outer dia. Pipes.

25 mm nominal outer dia .Pipes.

Providing and fixing C.P. brass waste coupling of approved quality with as per the direction of EIC.

40 mm nominal bore

Providing and fixing PTMT sink coupling of approved quality as per the direction of EIC.

100mm nominal bore

Providing and fixing PVC long bend for connecting IWC with flushing cistern approved quality as per the direction of EIC.

32 mm nominal bore

Providing and fixing controlled flush, low level cistern with 6ltr/8ltr flushing capacity made of PVC with all fittings complete.

Providing and fixing CPVC tank connector water tank including the adhesive required etc. all complete as per the direction of EIC. For

25mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions :

60 cm length

15 mm nominal bore

SANGAM ENTERPRISES

PIRIYA TECHNOLOGIES

MATHI CONSTRUCTION

M/S RAMESH CONSTRUCTION