99H(F)(W)/2025-26

Part - A ( Material) Following Material Supplied by the Contractor:-

LT Clamp

LT Shackle Insulator

Aluminum Lug(Long Barrel)

Holding Clamp with Nut & Bolt

Nut & Bolt

LT Clamp with Nut & Bolt

Aluminum lug For 150 sqmm

Aluminum lug For 63 KVA T/F

Stay Clamp for 8.5 Mtr. PCC Pole

11 KV Stay Insulator

X- Arm Holding Clamp for PCC Pole

11 KV F- Clamp for 8.5 Mtr. PCC Pole

ST Pole Clamp

St Pole Stay Clamp

S.T. F Clamp

The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 50 Km.)

Safe cartage of 8.5/9.0 Mtr. Long PCC poles.

Safe cartage of 11.0 Mtr. Long ST poles.

ACSR Weasel Conductor

AB Cable (1x16+1x25) sqmm

AB Cable (3x50+1x35+1x16) sqmm

AB Cable (3x95+1x70+1x16) sqmm

AB Cable (3x120+1x95+1x16) sqmm

Distribution Box Three Phase/Single Phase

Transformer 25 KVA

Transformer 63 KVA

Transformer 100 KVA

Transformer 250 KVA

11 KV Cable Jointing Kit Outdoor 3x70 sqmm

11 KV Cable Jointing Kit Outdoor 3x120 sqmm

11 KV Cable Jointing Kit Staight Through 3x70/120 sqmm

11 KV XLPE Cable 3x70mm2

11 KV XLPE Cable 3x120 mm2

11 KV XLPE Cable 3x185 mm2

11 KV Pilfer Proof Metring Cubical

Other Line material i.e. cross arm /conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable.

Dragging of PCC/ST Pole as per RESPO Norms.

Fabrication and Erection of Single Pole Support on PCC/ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Erection of Double Pole Support on PCC/ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Stringing, Sagging, binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms

Stringing, Sagging, binding and jumpering of AB Cable Size (1x16+1x25)/ (3x50+1x35+1x16)/ (3x95+1x70+1x16) and (3x120+1x95+1x16) as per RESSPO Norms

Mounting of 25 KVA Transformer as per RESSPO Norms.

Mounting of 63 KVA Transformer as per RESSPO Norms.

Mounting of 100 KVA Transformer as per RESSPO Norms.

Mounting of 250 KVA Transformer as per RESSPO Norms.

Erection & Commissioning of of Single/Three Phase Distribution Box with help of clamps (Cost of clamp & Bolt & Nuts shall be borne by contactor ) as per Norms.

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x70 mm2/3x120/3x185 sqmm confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x70/120 sqmm confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Laying of underground 11 KV 3x70/3x120/3x185 sq mm by trunch XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x70 mm2/3x120/3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Construction of Transformer Plinth size 2x2x1.5 including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Construction of Fencing of Transformer by MS Sqaremash Fabricated on MS Angles 0 Size 50x50x6mm and MS Strip (50x6mm) fencing (6 fit Hight including Civil Work) having OVerall dimension Complete with one no gate with provision of hinges roller & lacking arrangemtn properly grouted and painted with one coat of ret oxide Primer and two coats of Bus Green Super Enamel Paint.

Installation of 11 KV Pilfer Proof Metering Cubical

Supply and Laying of G.I. Pipe 6'' dia

Please Enable Macros to View BoQ information