8409 CERTAIN REPAIR REPLACEMENT OF STREET LIGHT FLOOD LIGHT FITTING AND FIXTURE AT INS TRATA WARALI BOAT POOL NT POOL INS ANGRE AND PCDA NAVY ETC IN THE AREA OF AGE EM NW KUNJALI UNDER GE NW KUNJALI

Amount

Taking down security/street light fitting for repair & checking internal wiring, cleaning complete & refixing the same on position after rectification of defects/replacement of items

S & F modular power socket 25A,2 module, 25A plug top, 25A mini MCB 'C' series 3KA including 4 module box with cover plate complete all as specified and directed. Make: Anchor/ Roma/ Crabtree SAP code : ACNKCXW253, DCTNCSPA025, ACAGXXW253, ACVPPCWV03, ACTXPIWX03 respectively

S&F in repair FRP looping box 225x295x122mm with locking arrangement, shockproof and rustproof, rot-proof and termite resistance, cable entry from bottom and side, 100% weather proof for outdoor installation suitable for pole mounting, tamper proof, restricts unauthorised tapping, IS 11731, IP 66/67 suitable for 16-35 sqmm 3.5 core aluminium cable including 1 No MCB 2-32 Amp and connector block two way and fixing with flat aluminium clamps not less than 25 mm x 3 mm with suitable size nuts, bolts and washers inside and outside looping box complets as directed. Make : Hensel Cat No: KF 3500H or equivalent cat part in National/Sintex

M&L for Scraping old paint from steel tubular poles by wire brush not more than up to 9.0 mtr length above ground level including street light arm applying one coat of steel primer and two coat of aluminium paint and marking pole No. all as directed.

Supply & fix in repair 20 Watt LED Post top Lantern, made in die-cast aluminium housing with decorative clear transparent diffuser and IP65 Protection complete with all acessories and fixing arrangement al as specified and directed. Make- C & S CAT Part No.-LTGLC20WHPLED/W (Cetus Series) or equivalent cat part in Crompton/ Wipro / Philips

Supply of LED Garden light 9 Watt, cylindrical shaped integral decorative LED bollard with Opal acrylic diffuser and IP 65 With all acessories including PCC foundation tapper plug bolts,nuts,screwed etc complete all as specified and directed. Make- C & S CAT Part No.-LTGLCG9WLED ( Gtud & Grus-M Series)or equivalent cat part in Crompton/ Wipro / Philips

S &F LED Street light 120 Watt powder coated PDC aluminium housing with sealed toughened glass cover, SMD LED with secondary lens complete with all acessories and fixing arrangement al as specified and directed. Make- C & S CAT Part No.-LTESS120WLED/LS (Indus Series) or equivalent cat part in Crompton/Wipro /Philips

S &F in repair LED Street light 90 Watt powder coated PDC aluminium housing with sealed toughened glass cover, SMD LED with secondary lens complete with all acessories and fixing arrangement al as specified and directed. Make- C & S CAT Part No.-LTESS90WLED/LS (Indus Series) or equivalent cat part in Crompton/Wipro /Philips

S & F in repirs 250 watt flood light (ORION 3.0 SERIES), PDC aluminium housing with aim & adjustable bracket, Matt finished reflector for glare elimination, SMD LED with secondary lens, IP65 with high power LED s as light source, suitable for high lighting architectural façade highmast and general purpose complete with all acessories and fixing arrangement al as specified and directed. Make- C & S CAT Part No.- LTEF250WHPLED or equivalent Cat Part in Philips/ Havells

S &F in repair 150 Watt LED, Highbay/Mediumbay LED IP65, PDC aluminium housing with mounting bracket / eyebolt, SMD LED array with intetrated lens polycarbonate cover, IP66 Protection suitable for highbay fitting and general purpose lighting complete with all acessories and fixing arrangement al as specified and directed. Make- C & S CAT Part No.-LTEHB150WHPLED/LS/WOR (CORVUS-E SERIES) or equivalent cat part in Crompton/ Bajaj / Philips

S&F in repair LED aviation light luminaires integral LED aviation light comprising of aluminium housing with polycarbonate enclosure,302 nos. LED are provided as per site required complete with all acessories and fixing arrangement al as specified and directed.Make- Bajaj CAT Part No.-BGAV 302 LED or equivalent cat part in Crompton/ Wipro / Philips

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16sq mm 4 core, laid in duct / along pole/wall etc including making connection including taking down old unsv XLPE cable of any size complete and making good the distrubed surface matching with existing surface complete all as specified and directed. Make of wire : Polycab/ Havells/ Gloster / Plaza Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

All as per Srl item No. 12 here in before but 16 Sqmm, 2 core

All as per Srl item No. 12 here in before but 50 Sqmm, 3½ core

All as per Srl item No. 12 here in before but 35 Sqmm, 3½ core

All as per Srl item No. 12 here in before but 10 Sqmm, 4 core

S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 7.5 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed.

Excavation in trenches n exc1.5m wide and n exc in depth for laying of cables and getting out in loose/soft soil compete all as directed.

Returing filling in including spreading, levelling watering and well ramming in layers not exc 25cm compete all as directed.

Removing excavated material n exc 50cm and deposting where directed at a level n exc 1.5m above the starting point compete all as directed.

Material and labour for sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be punned down to 10 cm complete all as specified and directed. (Note : Only punned down thickness shall be measured and paid)

Supply and laying unreinforced Precast Cement Concrete Cable Covers, class LV, Type-1, Flat, size 250mm X 150mm X 40mm made out of M-20 grade PCC as per IS-5820: 1970, in trenches for cable protection, embossed with " ELECTRIC" on the top surface complete all as specified and as dircted.

Supply and fix in replacement MS arms bracket 30 degree bend, 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed by the Engr-in-Charge.

Supply and fix 80 mm bore Galvanised steel tubing, light grade, with fittings and MS clamps, nuts, bolts etc for cable protection on pole, road crossing or ground in pillars for fixing gate light etc complete all as specified.

Supply and fix 40 mm bore Galvanised steel tubing, light grade, with fittings and MS clamps, nuts, bolts etc for cable protection on pole, road crossing or ground in pillars for fixing gate light etc complete all as specified.

M&L for Cutting road/hard standing for laying of cable and re mataling/making good the same to match the existing surface complete all as directed by Engr incharge.

M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised earth wire of size 4mm dia means of bolts, nuts check nut & washers of galvanised iron or steel & connected to main switch including complete excavation and earth work in soft/loose soil and disposal of surplus soil to a distance not exc 50 meters, PCC Chamber (1:3:6) type C-2 precast RCC cover with frame, funnel wire mesh, 20mm bore light grade galvanised iron or steel pipe for water, charcoal or coke and salt in alternative layers of 15cm compacted thickness all round the earth electrode complete alll as shown in electrical plate No 3 of SSR part-I including welding with suitble electrode and testing complete all as directed. Note : 4mm dia GI wire shall be arc welded to GI plate electrode.

Taking down the LT ACB of capacities 630Amps to 2000Amps of any make for repairs, servicing, comprising the following & refixing the same, re-orientation & labour for taking, defective parts & refixing the same spare parts:- (a) Checking /repairs of the mechanism of ACB (b) Checking/repair of the manual closing of the breakers (c) Decarburizing, setting reassembling, cleaning adjustment of fixed contacts, main contact & chamber and applying petroleum jelly all as complete.

M&L for Decorbonising /cleaning of LT 415/380V 3 phase bus bar, bus bar chambers of feeder pillar box, electrical connection complete, ACB, switch fuse unit arrangement incoming & outgoing installed in at various location after removing the complete bus bar from the bus chamber, cleaning with CTC & insure proper decorbonising refixing the same applying backtal (red) solution to the bus bar insulator & checking all the connections & tighting the nuts & bolts thimbles of incoming & out going system complete including replacement of defective rusted bolts, nuts & washers all as specified & directed.

M&L for Decorbonising / cleaning of ducts of HT/LT cable from various location as per following description. (a)Removing of accumulated, stanated water/oil from the duct either manually or mechanically.(b) Cleaning of cable bunch in duct of all accumulated slit/mud/debris/foreign material. (c) Removing & repositioning of RCC/MS duct covers including one coat of red oxide and one coat of black paint as required.(d) Patch civil work plastering and concreting work.

S&F in repairs of 0.71mm thick powder coated aluminium sheet cover, alloy 31000 H4 in ridges, Hips vally gutter including suitable size of revits/nut bolts complete bending, shaping, drilling, cutting notching and all as specified and directed.

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 12 or equivalent Cat part in Siemens/C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting VTPN 6 way, 440 volts with copper bus bar rating 250 Amps for each phase with 2 neutral bar, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat part no 5077 46 or equivalent in Siemens /Schinder/ C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting VTPN 12 way, 440 volts with copper bus bar rating 250 Amps for each phase with 2 neutral bar, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat part no 5077 48 or equivalent in Siemens /Schinder/ C&S NOTE FOR ITEM No. 32 to 34 : [i] MCB DBs shall be concealed in wall wherever posible including making good the surface to match with surrounding. [ii] The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair MCCB, 415 volts, four pole of capacity 100Amps, 16 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make : Legrand cat No 4200 15 or equivalent in Siemens /Schinder/ C&S

S & F in replacement 20 Amps Single pole and neutral enclosure with a Two Pin and earth plug and socket complete with one single pole MCB and making connections complete all as directed. Make -Legrand Cat Part No. 5078 14 or equivalent in Siemens /GE/ C&S

S&F MCB SP 0.5-4 Amps, 10KA, 'C' series 240V complete all as specified and directed. Make: Legrand cat No 4085 80-85 or equivalent Cat part in Seimens/C&S.

S&F MCB SP 6-32 Amps, 10KA, 'C' series 240V complete all as specified and directed. Make: Legrand cat No 4085 87-95 or equivalent Cat part in Seimens/C&S.

S&F MCB SPN 40-63Amps, 10KA 'C' Curve 240V complete all as specified and directed. Make: Legrand cat No 4086 18-20 or equivalent Cat part in Seimens/C&S.

M&L repair for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 1.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module (Make : schneider elect/legrand mosaic/anchor ave) complete for One light/fan/bell point controlled by one 5A switch complete including taking down existing old wiring incl all accessories, all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster

(i) One light point controlled by one 5A switch

(ii) One Fan point controlled by one 5A switch

(iii) One 5A flush type switch socket point on same board

(iv)One 5A flush type switch socket point on independent board

M&L in repair for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete necessary electric connection for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately.

M&L in repair for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red/yellow/blue (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately. (c) Make of wire : Polycab/Havells/Gloster/Plaza (d) Make of caping casing : National / Plaza/ Modi/ precision/ pesto plast

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed. Make: Anchor/Roma/Legrand/ goldmedal

S & F modular switch 1 way 6A,1 module all as specified and directed. Make: Anchor/Roma/Legrand/ goldmedal

S & F modular switch 1 way 16A,1 module all as specified and directed. Make: Anchor/ Roma/ Legrand/ goldmedal

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed. Make: Anchor/Roma/Legrand/goldmedal

S & F modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make: Anchor/Roma/Legrand/goldmedal

S&F for modular fan step regulator, 120W - 2 modular complete all as specified and directed. Make: Anchor/Roma plus/Legrand/goldmedal

S&F galvanised iron strip 25 x 4 mm or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed.

DHARMESH ENTERPRISES

ORIENT ELECTRIC CO

NOEL ENGINEERS

Rohit Enterprises

Shree Ayyappa Engineering

A P ENTERPRISES