Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.2 LAccepted-AOC | L1 | Accepted-AOC AWARD | |
| 2 | L2₹27.4 L+₹2.0 L (8.08%)Rejected-Finance 1ST FLOOR 100 FT ROAD NEAR HERO HONDA AGENCY OPP NARANG CHILDREN HOSPITAL BIBIWALA ROAD NORTH ESTATE | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹27.4 L+₹2.1 L (8.15%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹27.5 L+₹2.1 L (8.29%)Rejected-Finance 13 CEMENTRY ROAD DANAPUR CANTT PATNA BIHAR | PATNA | PATNA | BIHAR | 801503 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹27.8 L+₹2.5 L (9.73%)Rejected-Finance ATAL JI KI GALI SHINDE KI CHHAWANI LASHKAR GWALIOR MADHYA PRADESH 474009 | GWALIOR | MADHYA PRADESH | 474009 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹24.3 L
EMD Value
₹48,520
Closing Date
8 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GARRISON ENGINEER DANAPUR CANTT PIN 801503
SPL REPAIR WORKS TO BLDG NO 9/1 TO 9/10 OF FAMILY QTR AT MH DANAPUR UNDER GE DANAPUR CANTT
2023_MES_603328_1
GE/DNR/T-35 OF 2023-24 / 8711/E8
Open Tender
Civil Works
Item Rate
150 days
GE DANAPUR CANTT
AS PER NIT
8 documents required · 8 mandatory
₹500
GE DANAPUR
₹48,520
Yes
17 Jul 2023
14 Jun 2023
10 Jul 2023
14 Jun 2023
8 Jul 2023
29 Jun 2023
Amount
Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar and removing rubbish off permises all as specifed and directed
M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles as dierected.
M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 for laying of floor tiles as dierected.
M&L for 10mm thick Light shade coloured vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified & directed. Make : Somany/Johnson/Kajaria
M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete. Make -Somany/Johnson/Kajaria
M&L for 18-20mm thick granite slab (of any type) work (table rubbed and polished) in in steps, floors, jambs, pillar, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed (Note: Edges of slab shall be rounded off and a hole for gas pipe shall be made on cooking platform.
Dismantling of false ceiling of any description, any thicknes including cover fillets and frame work complete all as specified and directed by the Engr-n-Charge
M&L for anodised aluminium snap grid frame work with supporting hangers comprising of GI wire 4 mm dia with J hook, nuts/bolts etc for false ceiling with size of grid 605 x 605 mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg per RM and wall angle 23.5 x 26.4 x 1.4 mm weighing 0.191 Kg per RM respectively complete all as specified and directed. Make : Armstrong, Hunterdouglas
M&L for 8 mm thick E-board of size 600 x 600mm fixed to aluminium snap grid frame work as in ceiling flat or sloping conforming to IS -14862 complete all as specified & directed. Make : Armstrong, Hunterdouglas
Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete in parapet including necessary scapfolding.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided .
M&L for cutting openings of brick wall built in cement mortar or cement lime mortar, through brick wall for door, window and other openings or enlarging existing openings, converting window into door opening, etc or cutting out defective brick work for under pinning, including removing rubbish from site and all as directed by Engr-in-Charge.
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1.6 complete
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls build in cement mortar 1:4 etc complete all as specified
S&F MS TMT bar 10 dia & over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns,hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.
M&L for formwork to sides and soffits of floor or roof beam lintels, cantilevers, shelves including supports etc.
M&L for reinforced cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopie, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster on wall / ceiling of any description incl racking out joints hacking for key and scrubbing down with water complete.
M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete.
M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.
Supply only water proofing compound (liquid),ISI marked.
M&L for roller application of two coats of OBD on newly plaster wall surfaces applying with 1 mm thick Birla / JK Putty over a coat of primer of surfaces all as directed by Engr-in charge.
M&L for applying two coat of cement base paint on newly plastered wall surfaces over a coat of primer incl preparation of surfaces etc complete as all specified.
M&L for two coats of weather coat paint over a coat of primer on new surfaces on wall including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.
Taking down chowkats or frame with shutters of wooden/aluminium/steel (without taking off shutters from the frames) n. exc 1.5 Sqm each .
Taking down chowkats or frame with shutters of wooden/aluminium (without taking off shutters from the frames) exc 1.5 Sqm but n.exc. 4 Sqm.
S & F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.
Cutting holes in brick walls built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of Aluminium window, ventilator and making good dismantled portion in cement mortar 1:3 exceeding 1/2 brick but not exceeding one brick.
M&L hold fasts, door chowkats and similar articles conforming to Fe-410-0 or Fe 310-0
M&L for preparation of old wood or wood based material not otherwise described over 10 cm girth and applying one coat of synthetic enamel paint etc complete all as specified and directed by EIC
S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Make : Raj shree or Equivalent
S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.
S & F 150 mm long Aluminium anodised barrel tower bolts of extruded section.
S & F 125 mm long Aluminium handles of extruded section, fabricated type and fixed
S & F 300 mm long mild steel CP sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.
S&F 4.8 mm thick sheet glass fixed with rubber beading or aluminium beading to aluminium frame complete all as specified not exceeding 0.5 Sqm to each panes. Make : Modi Float / Saint Gobin / Atul
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples.
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.
S&F steel tube 15 mm bore medium grade galvanized with screwed and socketed joints including all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed. Make : TATA / JINDAL
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.
S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth all as specified and directred
S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I.
S&F in repairs 15 mm dia nipple suitable for HDPE water tank (minimum weight 15 mm - 38 gms) complete all as specified.
S&F in repairs 20 mm dia nipple suitable for HDPE water tank (minimum weight 20 mm - 45 gms) complete all as specified.
S&F in repairs 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15 mm - 142 gms) complete all as specified.
S & F in repair 15 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified
All as above but bore of pipe 20mm
S&F in repair CP brass 15mm bib tap fancy elbow type , with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Make : Prayag/Cera/Jaquar
S&F in repairs PVC connection 15mm dia size and 600 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed. Make - Prayag/Jaquar/Cera
S&F in repair grating doom 125 mm dia with waste hole of chromium plated.
S&F PVC (SWR) 110 mm bore 'P' trap or 'S' trap complete all as specified.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete
S&F PVC (SWR) 110 mm bore bends of any radius with door/without door.
S&F PVC (SWR) 110 mm PVC junction single (Single 'T') equal or unequal complete.
S&F in repair towel rail 600 mm long of CP fixed with and including chromium plated brass screwed and wooden/plastic cleats all as specified
S&F in repair soap dish, vitreous china white, approximate size 160x160x90 mm complete all as specified
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level)
M&L for 25 mm thick PCC 1:2:4 type B0(Using 12.50 mm graded stone aggregate) in sub base/roof of floorings of tiles
M&L for mild steel tubular pipe of medium grade (ISI marked) of any sizes cut to length, fixed to floor for post and wall for tubular trusses(framed), purlins, rafters etc complete all as specified and as directed by Engineer-in-Charge. Make : Jindal/TATA/Equivalent
S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) etc complete as all specified.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.
M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete
(i) Removing the existing treatment on roof of any number of layers including cleaning and drying concrete surfaces to receive the new treatment. Rate is inclusive of disposal of dismantled materials.
(ii) Applying primimg surfaces and a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (normal treatment using glass fibre base bitumen felt.)
(iii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.
(iv) Laying unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.
(v) Applying two coat of bituminous aluminium paint @ 100 gm/ Sqm.
Supply only water proofing compound (liquid),ISI marked.
Taking down existing water proofing treatment / PCC padding / roof tiles etc including cement mortar of any description and disposal rubbish outside MD land and hacking for keys, scrubbing down with water complete all as specified and direcetd.
M&L for 10 mm thick plaster in cement mortar 1 : 4 as a backing coat for fixing of wall /floor complete all as specified.
M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete.
M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete.
M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level)
M&L for 25 mm thick PCC 1:2:4 type B0(Using 12.50 mm graded stone aggregate) in sub base of floorings of tiles
M&L Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes
M&L for durastone heavy duty coloured vitrified tiles 300x300x9-10 mm thick exterior grade set and jointed with neat cement slurry and painted in coloured or white cement to match complete all as specified.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm.
Dismantling AC/CGI (corrugated, semi corrugated, etc), as in roof covering complete.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etcfixed with Jor L type hook bolt complete all as spd and directed.
S& F 6mm thick Asbestos cement twopiece adjustable plain wing ridge fixed with Jor L type hook bolt complete all as spd and directed.
Fixing only except sheet of 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etcfixed with Jor L type hook bolt complete all as spd and directed.
M&L for preparation of old decorted plastered/unplastered surfaces of walls of any description by washing, rubbing down and stopping of distemper and painted surfaces and applying one coat of distemper oil emulsion, white or tinned complete all as specified and directed.
All as per item No 12 mentioned here in before but on ceiling surfaces.
M&L for preparation of old decorated plastered/ unplastered surfaces of external walls of any description by washing, rubbing down and applying two coat of cement base paint complete as specified and directed.
M&L for applying two coats of elastomeric water proofing coating on lower portion of wall brick/concrete surface with Dam block 2K of Asian paints or Pidifin 2K of Pidilite or equivalent to FOSROC, Sika etc complete all as specified and directed by Engr-in-Charge.
Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.
Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.
M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.
All as per item no 3 above but one bell point controlled by one bell Push
All as per item no 3 above but one 5 Amps socket out let point controlled by one switch on same board with other switches.
All as per item no 3 above but one 5 Amps socket out let point on independent board controlled by one switch.
All as per item no 3 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.
Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.
Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.
Supply and fixing switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.
Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.
Supply and fixing bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed.
Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.
Supply and fixing for batten/angular fittings complete all as specified and directed.
Supply and fix LED Lamp 7/8 watt complete all as specified and directed.
Supply and fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.
Supply and fixing Bell, AC 240 Volts,single pole complete all as specified and directed.
Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .
Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .
Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .
Supply and fixing LED lights fitting 1x20 Watt , 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all accessories internally pre wired fixed to wall/ceiling incl fittings accessories all as specified. Make- Havells/Bajaj/Philips/Crompton.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and as directed. Make: Crompton/ Bajaj/Havells.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper wire upto ceiling rose complete all as specified and directed . Make: Crompton/ Bajaj/Havells/Usha.
Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket complete all as specified and directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP /CG/PHILIPS/BAJAJ
M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling one complete all as specified and as directed.
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store and after cleaning Refixing of refixing the same with replacement of multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan complete all as specified and as directed.
Taking down existing electric energy meter safely and take to custody in concerned officer and after work Refixing as per existing same with proper connection as per guided by Engg-in-charge.
Supply and fixing of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete
M/S Priya Trading Agency
M/S SAMRAT TRADING AGENCY
M/S PRAVIN ENTERPRISES
RAJ AND SONS
jaglalchoudharyandsons
Vijay Bakshi and Son
SINHA CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .