Stage phase 3rd

Earth work in excavation in trenches ( not exceeding 1.5 m in width as well as 10 sqm on plan ) including dressing of sides and ramming of bottoms lift up to 1.5 m in all kinds of soils

By Manual means

By Mechanical means

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Cutting road and making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri

Bituminous portion

Water bound macadam.

Cutting of macadum ( Bitminuous portion) incl disposal and making good same with rich mix CC upto a depth of 0.30M

Upto 1Sqm

Upto 1.50Sqm

Upto 2.0 sqm

Upto 2.50 Sqm

Upto 3.0Sqm

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and upto 40 mm.

Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-incharge

1:3:6 or richer mix (i/c equivalent design mix)

1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below

Of area beyond 3 sqm.

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead :

Of sectional area 40 sqcm. and above

Of sectional area below 40 sqcm.

Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in

R.S. Joists

Channels, angles, tees and flats

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.

Hand packing stone in wire crates incl. Cost of stones, wire crates all carriages of boulder from diferent pockets of Nalla for an average distamnce of 0.5 Km and crate from source

Constructing muthu bunds, comprising boulders and wood bushes in alternate layers; including working in water situations.

Supply of boulders incl pitching but excl. carrige

Supply of firewood i/c all carriages complete job

Suply of polyethene for checking of seepages incl all carriages etc

Hire Charges of water pumpset as directed by Engineer-in-Charge excl. cost of fuel , i/c operator charges i/c all types of carriages complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

12mm Cement plaster finished with a floating coat of neat cement of mix::1 : 4 ( 1 cement : 4 fine sand)

Circular work not exceeding 6m in radius

Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers:

Supply of oxygen cylinders incl all carriages upto site of work ( For clearence of blockades )

20 Pound Cylinder

120 Pound Cylinder

Dismantaling of G.I Pipes incl E/W and refilling complete job

Upto 40mm Nominal bore

Above 40mm nominal bore

Dismantling of Ductile Iron (DI) pipes by manual / mechanical means, including removal of rubber gaskets, defrosting / heating wherever required, by using suitable arrangements such as firewood, kerosene oil, salt, etc., and stacking of serviceable material at site, complete in all respects as per site conditions and as directed by Engineer-in-Charge. The quoted rate shall be deemed inclusive of all operations, irrespective of the season in which the work is executed.

Includig excavation & refIlling trenches.

100mm to 150 mm D.I Pipe

Above 150 mm dia upto 300 mm dia.

Excluding excavation and refilling trenches.

100mm to 150 mm D.I Pipe

Above 150 mm dia upto 300 mm dia.

Dismantling of Ductile Iron (DI) pipes by manual / mechanical means, including removal of rubber gaskets, defrosting / heating wherever required, by using suitable arrangements such as firewood, kerosene oil, salt, etc., and stacking of serviceable material at site, complete in all respects as per site conditions and as directed by Engineer-in-Charge. The quoted rate shall be deemed inclusive of all operations, irrespective of the season in which the work is executed.

Includig executaion & refIlling trenches.

Upto 150 mm diameter.

Above 150 mm dia upto 300 mm dia.

Excluding excavation and refilling trenches.

25 mm to 150 mm Pipe

Above 150 mm dia upto 300 mm dia.

Dismantling C I Pipes manually /by mechanical means breaking lead caulked joints,melting of lead and making into blocks including stacking of pipes ,E/W and refilling within 50 m lead as per directions of Engineer in Charge

Upto 150 mm diameter.

Above 150 mm diaupto 300 mm dia.

Above 300 mm diameter.

Providing push on joints to centrifugally cast (Spun) Ductile iron pipes incl testing of joints and cost of rubber gaskets

100mm Dia Pipe

150mm Dia Pipe

200mm dia Pipe

250mm dia Pipe

L/F Of Pipes excluding cost of Pipes and earth work but including all carraiages, leads & lifts complete job

100mm Dia G.I Pipe

80mm Dia G.I Pipe

65mm Dia G.I Pipe

50mm Dia G.I Pipe

40mm Dia G.I Pipe

25mm Dia G.I pipe

20mm dia G.I Pipe

Providing fixing of MS Flanges 10mm Thick incl Cost of nuts, bolts washers and all carriages

100mm Dia

80mm Dia

125mm Dia

150mm Dia

Laying in position D.I Pipes excl cost of earthwork and refilling but including all carraiages, leads & lifts complete job

Supply of Spun Yarn complete

Silt Clearance of Canals/structures by Mechanical means incl disposal upto a lead of 50 m and lift 1.5 m.

Silt Clearance of Canals/structures by Manual means incl disposal upto a lead of 50 m and lift 1.5 m.

Providing lighting arrangements during night hours i/c genset, fuel all complete.

Supply of Kerosine oil i/c all carraiges complete job

Supply of Petrol oil i/c all carraiges complete job

Supply of Diesel i/c all carraiges complete job

Supply of Pipes to be dumped in Divisional store i/c all carraiges, leads and lifts complete job.

20mm GI (Light)

25mm GI (Light)

40mm GI (Light)

50mm Dia GI (Light)

65mm Dia GI (Light)

80mm Dia GI (Light)

100mm Dia GI (Light)

100mm Dia DI (K7)

150mm Dia DI (K7)

200mm Dia DI (K7)

250mm Dia DI (K7)

300mm Dia DI (K7)

Carriage of pipes, Bleaching Powder, Alum or any other material by Mini Trucks from Divisional store to various locations, i/c all loading, unloading, leads & lifts complete job. Carraige of pipes is not covered under this item.

Upto 5Kms

Upto 10Kms

Upto 15Kms

Upto 20Kms

Upto 25Kms

Above 25Kms

Rethreading of New Pipes or damaged ends of GI Pipes

40mm Dia

50mm Dia

65mm Dia

80mm Dia

100mm Dia

Deployment of Tractor with Trolly and storage Tanks incl. all necessary fittings and fuel charges included provide drinking water facilities in case of non availability of piped water complete

up to 5 kms

up to 10 Kms

up to 20 Kms

Providing and fixing of PVC Water tanks i/c all carriage complete job

Providing and fixing of PVC pipes with specifications conforming to IS-4985 & IS-15801 and reputed make i/c all fittings all carriages complete job

Welding of damaged spots incl. hire charges of welding plant with CI welding Rods All cariages complete job1 By gas plant

2 By electric plant

Providing and fixing of different Pipe Specials of standard make as directed by Engineer-in-Charge i/c all carriages complete job

250 mm Equal Tee

200 mm D.I Bend

150 mm D.I Bend

150 mm Equal Tee

125 mm Bend

100 mm G.I Bend

100 mm G.I Equal Tee

100 mm G.I Union

100-80 Reducer Socket

100-65 Reducer Socket

100 x 100 x 80 Tee

100 x 100 x 65 Tee

100 x 100 x 50 Tee

100 x 100 x 40 mm Tee

100 x 100 x 25 mm Tee

100 x 100 x 20 mm Tee

100 mm G.I Elbow

80 mm G.I Union

80-65 Reducer Socket

80-50 mm Reducer Socket

80 mm G.I Elbow

80 x 80 x 50 mm Tee

80 x 80 x 40 mm Tee

80 x 80 x 25 mm Tee

80 x 80 x 20 mm Tee

65 mm G.I Union

65 x 65 x 20 mm Tee

65 x 65 x 25 mm Tee

65 x 65 x 40 mm Tee

65-50 Reducer Socket

50 mm G.I Union

50 mm G.I Elbow

50 x 50 x 20 mm Tee

50 x 50 x 25 mm Tee

50 x 50 x 40 mm Tee

50 mm Equal Tee

50-40 Reducer Socket

40 mm G.I Union

40mm G.I Elbow

40 x 40 x 20 mm Tee

40 x 40 x 25 mm Tee

40-25 Reducer Socket

40-20 Reducer Socket

25 mm G.I Union

25 x 25 x 20 mm Tee

25 mm Equal Tee

20 mm Equal Tee

20 x 20 x 15 mm Tee

15 mm Push Cock

20 mm G.I Elbow

25 mm G.I elbow

20 mm Nipple

25 mm Nipple

Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc.. Confirming to IS:14846 read with latest amendments.

80 mm dia. Class 1

100 mm dia. Class 1

125 mm dia. Class 1

150 mm dia. Class 1

200 mm dia. Class 1

250 mm dia. Class 1

300 mm dia. Class 1

Providing and fixing D.I. sluice valves Class 1 (with cap) complete with rubber insertions, bolts, nuts, extention rod, joint connector, supporting pedestal with base plate, top plate and necessary anchoring bolts etc. Confirming to IS:14846 read with latest amendments.( reputed make VAG, Kirloskar)

80 mm dia.

100 mm dia.

125 mm dia.

150 mm dia.

200 mm dia.

250 mm dia.

300 mm dia.

Providing and fixing Gun metel gate valve with C.I Wheel of approved quality with (screwed end).

32mm Dia Gate Valve

40mm Dia Gate Valve

50mm Dia Gate Valve

65mm Dia Gate Valve

80mm Dia Gate Valve

100mm Dia Gate Valve

Providing of different Tools and equipments of differenet sizes

Pipe Wrench 600mm

Pipe Wrench 900mm

Chain Tong 100mm

Chain Tong 80mm

Hexa Blades without frame

Hexa Blades with frame

Steel Jable

Pipe Cutter 80mm

Pipe Cutter 100mm

Pipe Cutter 150mm

Rain Coat

Rubber Snow boots

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).

50 mm dia.

80 mm dia.

100 mm dia.

Supplying of RBM, including extraction,royality etc complete dumping of RBM, levelling and dressing incl carriage by mechanical/manual means from source upto site of work incl loading ,unloading and stacking complete, cost of all T&P involved.complete job.

Supplying of Empty Cement Bags including filling of EC Bags with earth/sand including cost of earth/sand, sewing and placing in position, including carriages, all leads and lifts complete job.

Supply of labours

skilled

unskilled

Clearing snow (with frost) from Roads/ along pipe line/canal head works & intake channels, manually upto required snow dept as per site conditions using pick axes ,Blow Lumps and shovels incl cost of all T&P.Complete job.

Clearing Snow (without frost) from Roads, manually;

Snow depth over 150 mm but upto 250mm

Snow depth over 250 mm but upto 350mm

Snow depth over 350 mm but upto 450mm

Snow depth over 450 mm but upto 550mm

Snow depth over 550 mm but upto 650mm

Snow depth over 650 mm but upto 750mm

Snow depth over 750 mm but upto 850mm

Snow depth over 850 mm but upto 950mm

Snow depth over 950 mm but upto 1050mm

Snow depth over 1050 mm but upto 1150mm

Snow depth over 1150 mm but upto 1250mm

Providing/Fabricating, fixing of M.S fittings viz bends, Tees, double collars, tail pieces of suitable degrees to be fabricated from 6mm/8mm thick M.S plate as per the requirement of site. The item also includes cost of welding charges,cutting,threading ends etc. The work should be leak proof . The job is to be paid in fitted and finished form and is to be carried out as per the directions of site in charge.complete job.

Supply of Rubber insertions (Gaskets) to D.I pipes.

200mm dia

150mm dia

100mm dia

Supply of Rubber washers to G.I pipes.

150mm dia

100mm dia

80mm dia

65mm dia

Slip Clearance In soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Structural steel work in single sections, and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and laying in poistion 1000mm dia 225 mm in depth precast cement concrete rings for sludge/waste water including earthwork , disposal carriage loading & unloading complete job.

Providing and laying in poistion 1000mm dia and 50 & 65 mm in depth precast cement concrete lid over trench incl. loading , unloading, carriage complete job.

Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job

Supply and filling of filter media from approved source - Sand (Coarse filter sand - in filter beds. Including all carriages, complete job

Providing and fixing of HDPE pipes; PE-100, PN-10

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

By Mechanical Means